Contract Pharmaceutical Equipment
Stock No.:
73726001Used APM MIC-26 Automatic Inline Shrink Bundler with Shrink Tunnel – Up to 30 Bundles Per Minute
Used- American Packaging Machinery (APM) Model MIC-26 Inline Shrink Bundler With Shrink Tunnel. Capable of production speeds up to 30 bundles per minute. Unit features a straight product infeed and approximately 1/2" wide x 27" long seal bar with knife cutoff. Shrink tunnel has an approximate 20" wide x 17" tall opening with wire belt conveyor. Equipped with control panel featuring Allen-Bradley L32E PLC, Allen-Bradley PanelView Plus 700 HMI, and (2) Allen-Bradley PowerFlex 4 drives. Electrical requirements are 480 volt, 3 phase, 60 Hz, 46.25 amps. Designed for automatic inline shrink bundling, the MIC-26 combines film sealing and heat shrinking into a continuous packaging operation. Serial # 652. Possible applications include shrink bundling and multipacking bottles, cans, containers, trays, food products, beverages, water, juice, dairy products, condiments, oils, and other packaged consumer or industrial products.
MFR: APM
Stock No.:
73731046Used APM ML3-18 bundler. Can do up to 100 ppm. Package size up to 12" long x 16" wide x 3" high. Sealing bar is 18" long. Flighted indexing conveyor is set at 14". Servo and PLC controlled. Safety pr...
Used-APM ML3-18 bundler. Can do up to 100 ppm. Package size up to 12" long x 16" wide x 3" high. Sealing bar is 18" long. Flighted indexing conveyor is set at 14". Servo and PLC controlled. Safety protected by plexiglass cover over operating portion of wrapper. Serial #192. Equipped with Markem 9840 inline coder. Overall dimensions are 154" long x 53" wide x 71" high. Requires 460 vac 1 phase electrical. Good condition.
MFR: APM
Stock No.:
11585128Used APV Crepaco 500-Gallon Stainless Steel Liquifier – Dual Agitation with 75 PSI Jacket
Used- APV Crepaco Stainless Steel Liquifier, Approximately 500 Gallon. Vessel has an atmospheric internal design with jacket rated 75 psi at 350 degrees F. Equipped with a 7.5 HP top mounted drive for sweep agitation, and a 25 HP bottom entering high speed agitator. Dish top, cone bottom. Approximate dimensions 60'' diameter x 36'' straight side, with an 18'' conical bottom. National Board # 9015, serial # K1050, built 1995.
MFR: APV/Crepaco
Stock No.:
73731002Used AROL Euro PK Va 8-Chuck Rotary Capper
Used AROL Euro PK Va Eight-Chuck Rotary Turret Capper. Stainless steel construction, currently set for 33 mm plastic caps, with capacity up to 15,000 bottles per hour. Requires a drive motor and 240V, 3-phase power. Two additional chuck sets and a cap sorter for conversion to 33 mm aluminum ROPP and RO caps are available separately. Built 1995. Serial #3681. Possible applications include applying compatible closures to beverage and other bottled products.
MFR: AROL
Stock No.:
70226007Used Arpac Automatic Tray Bundler – Model 107-20 for Juice Box Packaging
Used- Arpac Model 107-20 Automatic Bundler. Operates by taking a single lane of product and forming it into multipacks. Last ran juice boxes 6 pk 13.5" long x 6.5" high x 9.75" wide (individual box 3.25" W x 6.75" L x 6.5" H). Allen Bradley 5/03 PLC. Elec: 3/60/460V 40amps. Rated 38 Cycles per minute. Built 2007.
MFR: Arpac
Stock No.:
73493001Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls
Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls. Max Film width: 26" x 12" Max bundle height. Set up for trayed products. Can run clear or print registered film. Allen Bradley PLC controls. 3/60/460V. OAD: 26'L x 68"W x 6'H.
MFR: Arpac
Stock No.:
70907005Pre-Owned Arrowhead S-Curve Conveyor – 3” Wide Plastic Belt
Used- Arrowhead S" Curve Table Top Chain Conveyor. Approximately 3" wide plastic belt. Approximately 21" long infeed into a 90 degree turn into a 9" long section into a 90 degree turn into a 21" long discharge end. Currently 45" from belt to floor. Mounted on adjustable carbon steel legs with casters. Carbon steel frame, belt side rails. Driven by a 1/2 hp, 90 volt, 1750 DC gear motor with a Penta DC motor speed controller.
MFR: Arrowhead
Stock No.:
72404005Used ABB IRB 6700-300/2.70 6-Axis Robot – 300 kg Payload
Used ABB IRB 6700-300/2.70 6-Axis Robot 300 kg Payload. Has a maximum handling capacity of 300 kg. Reaches up to 2.70 m. Position repeatability within 0.1mm, path repeatability within 0.15 mm. Operated with IRC5 single cabinet controller. Floor mounted unit. Teach pendant included. Robot Serial # 6700-803011, built in 2021. Suitable for heavy material handling, machine tending, palletizing, automotive manufacturing, and automated assembly applications.
MFR: ABB
Stock No.:
72404006Used Industrial Robot, 6-Axis with Articulated Arms
Used Industrial Robot, 6-Axis with Articulated Arms, Model IRB 6700-300/2.70. Heavy-duty, floor-mounted robotic arm with a maximum payload capacity of 300 kg and a reach of 2.70 meters. Features position repeatability of 0.10 mm and path repeatability of 0.15 mm. Equipped with ABB IRC5 single cabinet controller for robotic motion control and programming. Teach pendant included. Robot serial # 6700-803009. Built in 2021. Suitable for heavy material handling, machine tending, palletizing, automotive manufacturing, and automated assembly applications.
MFR: ABB
Stock No.:
72404007Used ABB IRB 6700 Heavy-Duty Robot Arm with IRC5 Controller
Used ABB IRB 6700-300/2.70 heavy-duty robotic arm equipped with an IRC5 single-cabinet controller and teach pendant for industrial automation applications.. Features a maximum payload capacity of 300 kg and a horizontal reach of 2.70 meters. Designed for floor-mounted installation and equipped with an ABB IRC5 Single controller. Offers position repeatability of 0.10 mm and path repeatability of 0.15 mm. Includes teach pendant. Robot Serial # 6700-803012. Built in 2021. Suitable for heavy-duty material handling, machine tending, palletizing, and industrial automation applications.
MFR: ABB
Stock No.:
724040082021 ABB IRB 6700-300/2.70 Industrial Robot – 2.70 m Reach
Used 2021 ABB IRB 6700-300/2.70 industrial robot offering a 2.70-meter maximum reach, 300 kg payload capacity, and six-axis articulated movement.. Arm has a rated payload capacity of 300 kg, and a maximum reach of 2.70 meters. Incorporates six-axis articulated movement with position repeatability of 0.10 mm and path repeatability of 0.15 mm. Includes an ABB IRC5 single cabinet controller and is configured for floor mounting. Teach pendant included. Robot serial # 6700-803004. Built in 2021. Suitable for automated manufacturing, heavy-part handling, machine tending, and palletizing operations.
MFR: ABB
