Contract Packaging Equipment

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 3227.

MFR: Hi-Vac

Used Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is ...

Used-Drexel FL40EX 4,000 lbs explosion proof electric forklift. Serial # 900826-089. Current model. Battery is 36 VDC with a 6 hr rate run time. Has a maximum lift height of 106". The fork legnth is 35.25". Mast has lift and tilt controls. Equipped with brass clad forks to prevent sparks. Includes MAC-Motor Model 18M1050-9C22 battery charger. Forklift weight with battery is 8530 pounds. Hour meter shows 1061 hrs. Built 9-27-91. The battery has been charged and seems to hold a charge. This forklift has low hours and appears to be in very good operational condition. (Is stored inside at our Warehouse) Good condition. Tires are for outside use. New cost is $75,776.00 including the battery and charger.

Used Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2....

Used-Two Oakes Model 8MB51, jackted high shear continuous rotor stator pin mill mixers with 316 stainless steel contact parts mounted on a stainless steel base. Rated from 50 to 1,000 lb per hour. 2.5" feed flanges. Mixers are driven by 5 hp, 1680 rpm motors requiring 460 V, 3 ph electricity. Allen Bradley powerflex 70 controls. System mounted on a stainless steel base frame. Overall dimensions are approximately 45" W x 50" L x 79" H

MFR: Oakes

Used Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable...

Used-Oakes model 14MC20 high shear, continuous, rotor and stator type pin mill mixer. Equipped with radial flow disc with high shear action consisting of front / rear stator and 20 hp Reeves variable speed drive. The mix head is jacketed. The mix head has 1.5" triclamp connections. Equipped with a size 30 Waukesau positive displacement pump with 1.5" triclamp connections. All mounted in a stainless steel skinned cabinet on casters. 230/460 vac 3 ph power required. Oakes mixers are designed to homogenize or aerate slurry to produce a highly uniform and stable cell structure. OAD 41" wide x 74" long x 77.5" tall.

MFR: Oakes

Used 250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The...

Used-250 gallon APV Crepaco Dixie style medium shear mixer. Stainless steel food grade construction. Vessel is 40" diameter x 60" straight side length with approximately 6" dished top and bottom. The bottom has a 3" and a 4" tri clamp ports. The top has one 18" manway w/lid. One sprayball (1.5" tri clamp) One 2" connection to the breather. Two each 1.5" and Five each 2" tri clamp connections. It has the standard 3 wheel, centrifugal fan type impellers. The drive is missing. The vessel is mounted in a stainless steel bar grate platform that is 65" x 113.5" x 57.5" high. The over all dimensions are 65"w x 113.5"l x 100.5" tall. Serial number K-0149. Good condition.

MFR: APV/Crepaco

Used Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model 40L SSE EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1165 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous locations. Includes operating controls and diaphragm pump. Overall dimensions are 57" w x 36" l x 75" h. Serial no. 1430.

MFR: Eiger

Used Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for...

Used-Eiger Machinery model ABM 40H EXP horizontal media mill has a 40 L carbon steel milling chamber driven by a 40 hp, 1175 rpm motor that requires 230/460 vac, 3 ph electricity. Motor is tagged for hazardous location. Includes operating controls and diaphragm pump. Overall dimensions are 64" w x 36" l x 80" h. Serial no. 06122.

MFR: Eiger

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained hous...

Used Premier Mill Corp. horizontal media mill, model ML1.5 The mill has a 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, with pump, mounted in self contained housing. Driven by a 5 hp main motor and a 1/3 hp pump motor. Required voltage 230 V ph3, 60Hz. Serial number HML 1.5.91403.98.0228. Overall 27" x 37" x 43".

MFR: Premier

Used Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pu...

Used-Becker Pumps Corp oil flooded rotary vane vacuum pump. Model U4.400 SA/K. Vacuum pump has a pumping speed of 283 cfm and a vacuum to 2.5 Torr. Pump has a 3" NPT inlet and a 4" NPT outlet. The pump is driven by a 15 hp 1165 rpm motor. Serial number 1469721. Requires 230/460 vac 3 phase electrical supply.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It ha...

Used-ACS Ancaster Conveying Systems model MD 8" QC-R-SS stainless steel sanitary rotary air lock. It has (8) 3" talll vanes on its rotor. The rotor assembly is polished to 150-180 grit finish. It has 8" inside diameter inlet/outlet flanges. Quick clean design has removable end that slides on guides for easy clean out. Also has air purge seals. Driven by 1 hp WEG motor and gearbox assembly that turns vanes at 20 rpm. Requires 208-230/460 vac 3 ph electrical supply. Good Condition. Low hours, project cancelled.

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/...

Used VAV Scan vibratory Conveyor. Stainless steel construction. Conveyor pipe of 16" diameter and 148" long.Has clean openings on boths ends. The unit has three 6" inlets/outles and two 12" inlets/outlets. ith 2 vibro motor, 1200 rpm each. Has a support floor mounting with 4 springs and 4 schocks absorbant. 38" in the tall end and 10" in the short end. The unit number is : 29751 and year: 1991.