Contract Packaging Equipment
Stock No.:
10715053In STOCK AND New- Paul O. Abbe, Model RB-375 Ribbon Blender
NEW & IN STOCK- Paul O. Abbe, Model RB-375 Ribbon Blender.In -Stock . 375 Cubic Foot working capacity. 441 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 67.7" wide x 157.5" long x 78.8" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 75 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 20 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 5.5" wide x 27.6" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 36.2" long. Approximately 4" discharge height. Approximate weight 20,944 pounds. Approximate overall dimensions: 91.9" wide x 237.1" long x 104.7" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
54154001Used – 3,800 Gallon Stainless Steel Vertical Storage Tank – 316 SS, Flat Top, Di
Used- Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.
Stock No.:
10131011Used AMK Double Arm Mixer VIU Strength Class IV – 1500L Capacity, 316SS, 135HP, Tilt Discharge, Built 2005
Used- AMK Double Arm Mixer, Type VIU-Strength Class IV. 316 (V4A) Stainless Steel on product contact parts. Max working capacity 396.8 gallon (1500 liter). Z-blades. Double jacketed bowl and not rated vacuum. Working temp 68-392 deg F (20-200 deg C). Hydraulic tilt discharge mechanism. top cover. Mounted on carbon steel support frame. New year 2005. Previous used in a pigment application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: AMK
Stock No.:
10131007Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application
Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Kurimoto Osaka
Stock No.:
10131008Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader
Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Kurimoto Osaka
Stock No.:
734380053M-Matic 800af Adjustable Box Sealer | 28 Cases per Minute Performance
Used 3M-Matic Model 800af adjustable top only case sealer, Type 39600, capable of speeds up to 28 cases per minute, depending on application. Handles cases from 6" to 30" long x 4.75" to 21.5" wide x 4.75" to 24.5" high, with case weights ranging from 5 lbs to 85 lbs. Serial number 3447. Electrical requirements are 115 Volt, single phase, 60 Hz, 3.8 Amp. Possible applications include automatic top sealing of shipping cases and cartons containing packaged products weighing from 5 lbs to 85 lbs.
MFR: 3M
Stock No.:
73569011Used 3M-Matic 8000A Adjustable Case Sealer – AccuGlide Taping Head, 40 CPM (2019)
Used 3M-Matic Model 8000A Adjustable Case Sealer with AccuGlide Taping Head. Rated for up to 40 cases per minute. 4.25" to 27.75" (108mm - 704.9mm) max box height, 4.5" to 21.5" (114.3mm - 546.1mm) max box width. 6" to Unlimited box length. 2" Tape head. Side Belt drive system. Uniform Box Types. 1ph/60Hz/120V requirements. Type: 11500 Serial# 21946 M, built 2019. Overall dimensions 70" x 43" x 65"T.
MFR: 3M
Stock No.:
47577005Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System
Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Scott Turbon
Stock No.:
83818Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls
Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.
MFR: Keith Machinery
Stock No.:
47577006Used Ross HSM-40 Vacuum Double Helical Mixer Reactor – Stainless, Jacketed, Explosion-Proof
used- Ross HSM-40 Vacuum Double Helical Mixer Reactor, 316 stainless steel. This unit will mix most things that a double planetary mixer will mix, and in many cases, better and faster. Unit has air/oil lift mechanism to raise and lower the drive to allow the removal of the mix tank. Designed for operations under vacuum & a positive pressure of 35 psi @ 350f, jacket maximum allowable working pressure 100 psi @ 350f. Minimum design metal temperature 0f at 100 psi.7.5hp motor. ross metal fabricators Serial# 11801-1, National Board# 463, CRN 15925. stainless steel contact parts. jacketed mix can with provision for thermocouple, insulated with sheathing. explosion proof motor runs on 575 volts, 3 phase, 60 hz. no controls. mixer dimensions for the ross hsm-40: 43" w x 68" l x 91" h lowered position tank id is about 23 and about 27.5 deep.
MFR: Ross Industries
Stock No.:
47577015Used Ross HDM-40 Gallon Double Planetary Mixer – Vacuum Rated, 316SS, 15 HP (Approx.)
Used- Ross HDM-40 Gallon Double Planetary Mixer. 5 to 40-gallon working capacity. Designed to mix under a full vacuum 29-1/2" HG. An air over oil hydraulic lift system is included to raise and lower the top of the mixer with drives and mixing blades. All product contact parts 316SS with a 150-grit finish and exterior stainless with an 80-grit finish. Driven by a 15 HP (to be confirmed) motor with a mechanical variable speed drive. All carbon steel surfaces are painted with a two component epoxy. Fitted with standard rectangular profile mixing blades.Comes with a control panel suitable for 3 PH / 60HZ /480v. Vacuum hood has a 2" sight port, a light fixture, a vacuum exhaust port and a port with 80 Watts / 120 volts EX-PROOF light. Mixer comes with five mix (not jacketed) cans, 316 SS with interior finish 150-grit and exterior finish 80-grit, internally machined for use with a discharge press, designed for vacuum mixing, bottom outlet is a 4" Tri-Clover 316L SS flush plug connection with a 4" flush plug, mounted on casters, push pull handle. Prior use for manufacturing oral care products. Approximate weight of the mixer is 6234 Lbs. Includes Model EDS-40 discharge press, serial #75326.
MFR: Ross Industries
