Contract Packaging Equipment

Used Progressive Industries, Inc model MS-20 air classifier only. Carbon steel construction. For particles 3 microns down to 0.4 micron average diameter. It can handel feed rates of 1 ton to 20 tons ...

Used-Progressive Industries, Inc model MS-20 air classifier only. Carbon steel construction. For particles 3 microns down to 0.4 micron average diameter. It can handel feed rates of 1 ton to 20 tons per hour. The diameter of the chamber is 46" and the overall length is about 119". The rotor is driven by a 20 hp, 230/460 vac 3 ph electric motor. This unit is for air classifing after milling. Serial # 88 14.

Used Hi Speed Disperser has two 50" stainless steel shafts with two 8" diameter blades on each. Unit is equipped with an air over oil lift. Variable speed. Driven by a 20 hp, 1755 rpm motor that re...

Used-Hi Speed Disperser has two 50" stainless steel shafts with two 8" diameter blades on each. Unit is equipped with an air over oil lift. Variable speed. Driven by a 20 hp, 1755 rpm motor that requires 230/460 vac, 3 ph electricity. Overall dimensions are approximately 32" w x 80" l x 80" h. Motor is tagged for hazardous location.

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.

MFR: JBT Foodtech

Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

MFR: Hamilton

Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed

Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt

Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.

MFR: Howard

Used 600 HP Schutte-Buffalo Hammermill with Twin City Blower, Heavy-Duty

Used- Schutte-Buffalo-Astec Model AHM-20 Carbon Steel Hammermill. Approximate 48" diameter x 50" wide rotor. Top feed with hopper, bottom discharge. Driven by a 600 HP, 3/60/460 volt, 1790 rpm motor. Mounted on a frame. Serial# 16088HM1. Includes a Twin City blower, Type RBR-SW, size 926, driven by a 200 HP, 3/60/230/460 volt, 1785 rpm motor. Astec serial# 16088HM1.

MFR: Schutte

Used Ross HDM-200 Double Planetary Mixer with 200 Gallon Capacity

Used Charles Ross & Son Model HDM-200 Double Planetary Industrial Mixer With 200 Gallon Maximum Working Capacity. Designed for heavy-duty batch mixing of compatible viscous and high-consistency materials, with an operating capacity range of 30 to 200 gallons. Equipped with (2) carbon steel planetary mixing stirrers operating at approximately 24 RPM orbital speed and 26 RPM stirrer rotation speed. Features a top dust hood with charging port, bottom fume hood and hydraulic lift system with dedicated hydraulic power pack for raising and lowering the mixing assembly. Includes (1) removable mixing can measuring 44" diameter x 33-3/4" deep. Driven by a 40 HP explosion-proof (XP) motor rated at 1,740 RPM, operating on 460 volts, 3-phase, 60 Hz electrical service. Power is transmitted through a Delroyd Model HV120 reduction gearbox with a 74.21:1 gear ratio. Mixer is mounted on a heavy-duty structural I-beam frame. Serial #35555. Additional mixing cans are available for purchase at an additional cost, subject to availability. Possible applications include batch mixing, blending, kneading and processing of compatible high-viscosity adhesives, sealants, coatings, pastes, putties, resins, polymer compounds, construction materials and other suitable industrial formulations.

MFR: Charles Ross

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.

MFR: Aaron Process

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System. With TECO-Westinghouse 200 HP Mill Drive Motor and Toshiba 25 HP Classifier Motor. Last used on guar beans for making fracking lubricant.

Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun

Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.

MFR: Unknown