Contract Packaging Equipment

Used Cummins DQGAB 1500 kW Diesel Generator – Tier 2, PMG, Sound Enclosure, UL2085 Fuel Tank

Used-1500 kW standby (1350 kW prime) Cummins diesel generator set model DQGAB, SN-G110233080. Cummins QSK50-G4 engine rated 2220 HP at 1800 RPM, SN-25366503, EPA Tier 2 emissions. 3/60/277/480V, 12 lead reconnectable to other voltages. 2500 Amp main-line circuit breaker. PMG - Permanent magnet generator. Oversized generator end rated 1612 kW. UL 2200 listed package. Engine cooling high ambient air temperature. PowerCommand digital control panel. Battery charger. Coolant heater. Sound attenuated enclosure. 5181 gallon UL2085 listed sub-base fuel tank with secondary containment. 770 Hrs. Year 2011. Passed load test 1/3/2025. Overall dimensions enclosure with genset 150W x 397L x 153H, 51,000 lbs, fuel tank 144W x 397L x 37H 25,389 lbs.

MFR: Cummins

Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor

Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.

MFR: Teledyne Readco

Used Motan 14 m³ Stainless Steel Mixing Silo System – Complete with Paul Groth Elevator, FAS Conveyors & Blowers

Used- Moton Mixing Silo, 14 m3 volume. Stainless steel, on 4 legs, bottom canter product discharge, control panel. Incl. (1) Paul Groth elevator, type BE 180. (1) Air blower, (1) FAS feeding & discharging conveyers, (1) Blower, piping and additional infrastructure.

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1168. API-650 standard. Slight cone top, flat bottom with ramped side opposite where agitator was mounted (agitator no longer available). Top fittings: 20" manway, (1) 6" vent, and (1) 12". 24" side bottom manway, (1) 2" (1) 3", (1) 6", (3) 8", (3) 10" and (1) 12" side top inlets (2) 8" side bottom outlets. Built 2012.

Used 14,000 Gallon 316L Stainless Steel Vertical Tank – Erected Steel Products, API-650, Agitated, Built 2012

Used-14,000 gallon Erected Steel Products 316L Stainless Steel Vertical Tank. 13' diameter X 15' high straight side. Rated ATMOS @ 20 to 160 F. S/N 1169. API-650 standard. Slight cone top, flat bottom with ramped side opposite where the agitator was mounted (agitator no longer available). Top fittings: 20" manway, and (1) 6" vent. 24" side bottom manway. (1) 12" and (1) 24" side top inlets. (1) 6" , (1) 8", and (1) 10" side inlets. (1) 2.5", (2) 8", (1) 3", and (1)4" side bottom outlets. Built 2012.

Used Littleford Model FKM-4000-D Stainless Steel Jacketed Plough Mixer – 4000L Capacity

Used- Littleford Model FKM-4000-D Stainless Steel Jacketed Plough / Plow Mixer. 4000 Liter Capacity. Jacket rated 75 PSI at 320 Degrees F. National Board# 1272. Driven by 125 HP, 460 volt motor into gear reducer. Serial # 40671-3267. All product surfaces 316 Stainless Steel, polished to 120 Grit. OAD: Approx. 16' L x 6' W x 8' h. RECONDITIONED AND NOT USED SINCE.

MFR: Littleford

Used Littleford Vacuum Plow Mixer/Dryer – Model VT-4000 (4000L Capacity)

Used Littleford Vacuum Plow Mixer/Dryer Model VT-4000 (4000L Capacity), 304 Stainless Steel. Approximately 54" diameter x 121" straight side with dished ends. Internal rated 15 PSI/VACUUM @ 250 degrees f., Stainless steel jacket rated for 75 psi at 250 deg.f. 6" diameter shaft, 8 bolt-on plow blades, 2 end scrapers, provision for 4 choppers, air purged main seals. Driven by a 50hp motor through gearbox. Various top openings. 6" diameter off-center bottom outlet. Unit mounted on carbon steel frame. Included VFD Control Panel. National Board# 1260. Serial# 11363.

MFR: Littleford

Used A. Bolz MF400 Vertical Conical Mixer – 4000L Working Capacity, 316 SS, Explosion-Proof Motors, Pharma Grade

A. Bolz GmbH & Co KG Vertical Conical Batch (Nauta type) Mixer, Model MF400. Material of construction is 316 (V4A 1.4401/04) on product contact parts. Inside polished to corn 240. Total capacity 326.66 cu ft. (9250 liters), working capacity 141.25 cu. ft. (4000 liters). Not jacketed. Inside rated for 1.5 PSI (0.1 bar) at 176 deg F (80 deg C). Screw mixing device driven via a gearbox by (1) x Loher, type ENGV 160MB-160MB-04C 400-volt/50cycle/3Ph & (1) Loher, type ENCV-090LB-04 C 1.35 KW-400volt/50cycle/3Ph explosion-proof motors. Incl. Manway and bottom outlet. Hanging type incl. 3 claws. Overall dimensions 91" (2800 mm) x 91" (2800 mm) x 162" (5000 mm) high. Weight empty approx. 4 tonnes. Previously used in a Pharma application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Bolz

Used CPE Filters Inc. Model 24-CFR-009-C Cartridge Filter Receiver – 400 ACFM Dust Collector

Used- CPE Filters Inc Model 24-CFR-009-C Cartridge Filter Receiver / Dust Collector, Carbon Steel, Vertical. Designed for 400 acfm. 142 Square foot filter area. Dust density 50 lbs cubic foot. Approximate 28" diameter x 36" straight side housing. Dished top, coned bottom. (9) 6" diameter x 24" long filter cartridges. Design temperature 200 degrees F. 18" x 24" Side access door. (3) Valves. 4" Diameter clean air outlet, 4" tube dusty air inlet with internal baffle. Approximately 8" center bottom outlet. Side lug mounted with (4) carbon steel legs. Serial# 5794. Does not include blower.

MFR: CPE

Used CPE Filters Inc Cartridge Filter Receiver / Dust Collector – Model 24-CFR-009-C, 400 ACFM

Used- CPE Filters Inc Cartridge Filter Receiver / Dust Collector, Model 24-CFR-009-C, Carbon Steel, Vertical. Designed for 400 acfm. 142 Square foot filter area. Dust density 50 lbs cubic foot. Approximate 28" diameter x 36" straight side housing. Dished top, coned bottom. (9) 6" diameter x 24" long filter cartridges. Design temperature 200 degrees F. 18" x 24" Side access door. (3) Valves. 4" Diameter clean air outlet, 4" tube dusty air inlet with internal baffle. Approximately 8" center bottom outlet. Side lug mounted with (4) carbon steel legs. Serial# 5887. Does not include blower.

MFR: CPE

Used Siemens STC-SV (08-8)-B Two-Stage Centrifugal Gas Compressors – 1479 kW, 12,327 m³/h, 9 Bar Max

Used Siemens STC-SV (08-8)-B Two-Stage Centrifugal Gas Compressors 1479 kW, 12,327 m/h, 9 Bar Max. Rated power 1479 KW. Rated capacity 12,327 m3/hour. 0.2 barg inlet pressure. 3.7 discharge pressure 9 bar (135 PSI) maximum allowable discharge pressure. Driven via a Flender TX45/6C1gearbox by an 1800kW motor, gas filter, lube oil system, acoustic enclosure, air circulation electric fans, Frame mounted. Complete with controls and additional infrastructure. New year 2014. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Siemens STC-SV Two-Stage Gas Compressor Skid – 1479 kW, 9 Bar Rated

Siemens STC-SV Two-Stage Gas Compressor Skid 1479 kW, 9 Bar Rated. Rated power 1479 KW. Rated capacity 12,327 m3/hour. 0.2 barg inlet pressure. 3.7 discharge pressure 9 bar (135 PSI) maximum allowable discharge pressure. Driven via a Flender TX45/6C1gearbox by an 1800kW motor, gas filter, lube oil system, acoustic enclosure, air circulation electric fans, Frame mounted. Complete with controls and additional infrastructure. New year 2014. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.