Contract Packaging Equipment

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle. 316 Stainless Steel. Has counter rotating sweep mixer with scrapers and high shear mixer. Internal rated Full Vacuum. Jacket rated 40 PSI @ 300 Deg.F..Top Drive motor Disconnected for removal. Test results: The previous owner reports that all components of the homogenizer are fully functional. Fully tested with H2O. The homogenizer and inner and outer paddles work as do their RPM meters. The cover lifting hydraulics is fully functional. The cover lift mechanism is functional as well as the homogenizer and the two blades. The jacket was pressure tested and vessel was vacuum tested - no leaks. The chart recorder is out of service as well as the hour meter. The light bulb that gave me trouble in the video was replaced.Note: The outer paddles must be jogged to index, (amber light), before the cover will open. The limit switch with long arm to contact tank, must be in the correct position for lifting and for paddle operation. Last used in sanitary cosmetics facility. Video of unit running available.

MFR: J C Pardo & Sons

Used GEA Nu-Con CV 1250 Rotary Valve for Bulk Material Handling

Used GEA Nu-Con Demountable Rotary Air-Lock Valve, Model CV 1250 DEM. Is of stainless steel construction. No drive. Serial# 61510950.

MFR: Nu-Con Engineering

Used Fryma VME-50/C Vacuum Paste/Cream Mixer – 50L, 316 SS, Jacketed

Used- Fryma Vacuum Paste/Cream Mixer, Model VME-50/C. 50 liter (13 gallon) maximum working capacity. 90 liter (24 gallon) total capacity, 43.5 PSI Double Jacket Working Pressure, 316 Stainless Steel Construction. Includes: Vacuum pump driven by 1.5 HP Motor. 480V/3/60Hz.

MFR: Fryma

Used Modern Process Equipment 700FX Stacked Coffee Granulizer | High Capacity In

Used Modern Process Equipment 700FX Stacked Coffee Granulizer | High Capacity Industrial Coffee Grinder. Rated up to 1,100 lbs/hr capacity for espresso grinding, up to 2,000 lbs/hr for filter coffee grinding. 1/3hp Variable speed power feeder, Infinite roll gap adjustment. (2) stacked grinding sections with approximate 6" diameter x 18" long rolls. Driven by a 10hp, 3/60/208-230/460 volt, 1760rpm motor. Approximately 13" diameter x 48" long bottom paddle conveyor, end bottom discharge with 29" discharge height. Mounted on a Carbon Steel Frame.

Used 50 Liter, Single Use Bioreactor, Manufactured by Thermo Scientific

Used- Thermo Scientific Single Use Bioreactor, Model HyClone, 50 liter(13.2 Gal) capacity, Stainless Steel. Open top, flat bottom shell. 14" diameter x 22" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB Series A Drive, Brother 3 phase induction motor, 1/4hp 3/60/208-230/460v 1720rpm, 10:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-01.

MFR: Thermo Scientific

Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel

Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

MFR: JV Northwest

Used – 50 Ton Horizontal Liquid Carbonic CO2 Tank – Bulk Cryogenic Storage

Used 50 Ton Horizontal Liquid Carbonic CO2 Tank Bulk Cryogenic Storage. SA-516-70 Shell & Heads. 78" diameter x 598" Straight Side. MAWP: 360psi at -20 to 650 degrees F. 15" diameter manway. Product: Carbon Dioxide. National Board# 4230, Serial# 59980, Built 1978.

MFR: Liquid Carbonics

Used Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank

Used- Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank. Flat top and bottom. 11-6" diameter X 17 high straight side. Has side bottom manway. Has (4) internal baffles. Has stainless steel (4) blade agitator, driven through Chemineer Drive. Insulated and covered with sheathing. Includes ladder with safety cage and top handrail.

MFR: Pittsburgh-Des Moines

Used Winkworth ZX500-6 Z-Blade Mixer-Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units

Used Winkworth ZX500-6 Z-Blade Mixer/Extruder | 500L Working | Vacuum Lid | Jacketed | 304 SS | With Tool Temp Units. 500 liter (132Gal) working capacity with a 778 liter total capacity (product dependent). 304 stainless steel chamber measures approx. 1,090mm long x 956mm wide x 735mm deep. Unit has vacuum rated domed hood/lid. 304 stainless steel external jacket. Each Z-blade driven by 30kw (40hp) motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Motors are dual rated 50/60 Hz. Blade Bowl Clearance Straight side 3mm , End 4mm. Cooling Jacket Design Pressure Min Atmos Max 3.5 bar.G Design Temp Min 10C Max 250C Test Pressure 6.7 bar.G Design & Manufacturing Code SEP (Sound Engineering Practise). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Winkworth

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.

NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.

MFR: Paul O Abbe

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day stainless steel double spiral ribbon blender with approximate 135 cu ft capacity. Equipped with top cover, (2) bag dump stations, 30 HP explosion-proof motor and reducer, and center bottom outlet with valve. Serial #85051.