Contract Packaging Equipment
Stock No.:
50467058Used Industrial Filter Manufacturers Vacuum Pump System – Model VAGU10TVO15316L – 50 PSI Internal – Built 2006
Used- Industrial Filter Manufacturers Vacuum Pump System, Model VAGU10TVO15316L. Internal rated 50psi at -20 to 250 degrees F, External rated 15psi at -20 to 250 degrees F. Serial# 1038700101, National Board# 360, Built 2006.
MFR: Tuthill
Stock No.:
72506002Used Videojet 1610 InkJet Printer – High-Speed Industrial Coding
Used- Videojet InkJet Printer, Model 1610. Capable of up to 5 lines of high resolution print at speeds up to 960 per minute.
MFR: Video Jet
Stock No.:
72506003Videojet 1610 InkJet Printer for Food, Pharma, and Industrial Packaging
Used- Videojet Model 1610 InkJet Printer. Capable of up to 5 lines of high resolution print at speeds up to 960 fpm.
MFR: Video Jet
Stock No.:
73433001Complete Inline Bottle Filling and Packaging Line – Overflow Filler, Capper
Used- Inline Filling Systems Liquid Bottle Filling Line. Line was set up to run 64oz rectangular bottles and 32 oz square containers with 53mm caps. Containers were either front and back or 3 sided wrap on the square bottle. Line consists of 45" diameter stainless steel unscrambling table with variable speed drive and square bottle orientor. Inline Filling Model FOFNT48 4 head overflow filler with drip tray, 1" diameter nozzles, indexing gating system, washdown capable, AB Micro 850 PLC, (2) A/B powerflex 523 and A/B Panelview 800 HMI, overflow tank with pump. Stainless steel 4-1/2" wide conveyor chain, Computorue NT automatic capper (currently set on 53mm caps) with cap size range up to 120mm. Container range: 1-1/2" - 15" (height) x 1/2" - 7" (width). Has 5.0LH bulk cap elevator/sorter. 48" Accumulation table. Last ran a tea beverage product.
MFR: Inline Filling Systems
Stock No.:
73473001Used Inline Filling Systems 14-Head Automatic Inline Pressure Filler
Used Inline Filling Systems 14 Head Automatic Inline Pressure Filler. Has approximate 3/4" diam stainless steel nozzles. Control panel with Allen Bradley Micro850 PLC, A/B Panelview 800 HMI, A/B powerflex 523 drives. Stainless steel construction. Last used in beverage operation. Serial# 43091. 1/60/220 Volt. Overall Dimension 74" X 39" X 94" tall.
MFR: Inline Filling Systems
Stock No.:
73473004Used Inline Filling Systems NT Capper Fully Automatic Inline Capper
Used Inline Filling Systems Fully Automatic Inline Capper, Model NT Capper. Up to 200 CPM, depending on cap size and container configuration. Up to 120mm diameter and container size range of (height) 1-1/2" to 15" and (width) 1/2" to 7" in plastic, metal, or glass. Cap tightening system of rotating belts permits single point tool-less cap width adjustment, corrosion resistant. Control panel with Koyo Direct Logic 05 PLC. Includes elevated conveyor with hopper, serial# 43110. Serial # 43104. 1/60/120 Volt. 38mm & 28mm change part available.
MFR: Inline Filling Systems
Stock No.:
73090006Used Ishida Model RVE-216B-1D/30-PB 16 head smooth bucket combination scale, 3000 liter buckets, booster hoppers, booster buckets with dual discharge.
Used- Ishida Model RVE-216B-1D/30-PB 16 head smooth bucket combination scale, 3000 liter buckets, booster hoppers, booster buckets with dual discharge.
MFR: Ishida
Stock No.:
73090007Used Stainless Steel Platform for Packaging Line Scale Support
Used Stainless Steel Platform, Last used for Combination Scale. This stainless steel platform last used to mount Ishida 16 head combination scale above a Laudenberg FBM 22 horizontal form fill and seal machine. Has stairs and hand rails. Platform, Stairs and hand rail only.
MFR: Ishida
Stock No.:
73388001Used Ishida IX-GA-65100 X-Ray Inspection System – FDA Approved, Built for Food Applications
Used- Ishida IX-GA-65100 (X-Ray Inspection system. Capable of speeds from 5 - 30 meters per minute. Has a maximum conveying product weight" 25kg (over entire conveyor). Cooling method: Hermetical air cooling. FDA approved urethane belting conveyor. Operating temperature: 0 deg C - 40 deg C (with no freezing or rapid temperature shifts). Operation humidity: 30 - 85% RH (with no condensation). Xray out put: Max 350W. Inspection chamber: 7- - 1000mm (length) up to 650mm (width) up to 270mm (height). Last used in food operation. 230 volt single phase.12.0 AMP
MFR: Ishida
Stock No.:
73584002Ishida CCW-RZ-212P-D705-WP Multihead Weigh Scale System
Used- Ishida Model CCW-RZ-212P-D705-WP 12 Head Double Drop Dimpled/Embossed bucket combination scale, bucket elevator. 12 head split into 24 total buckets, stainless steel, combination, weigh scale system. Rated from 20 to 80 weighs per minute per side ( depending on materials and application). Has a weight capacity: 4 to 500 grams with accuracies of +/- 1 gram, maximum volume of 800cc (per single dump). Equipped with double-beam strain gauge load cell, radial feed trough, (12) 5" long x 4" wide x 5" deep stainless steel dimpled feed buckets and 6" long x 3-1/2" wide x 4" deep dimpled stainless steel weigh buckets (2 for each feed bucket) and 3 sets per each product stainless steel dimpled discharge chutes. Frazier & Son Model C 4" x 8" bucket elevator with vibratory feeder. Includes Mezzanine
MFR: Ishida
Stock No.:
73630001Unused Ishida DACS-G-S015 Checkweigher – Conveyor Mounted Automatic Weighing System
Unused Ishida Conveyor Mounted Checkweigher, Model DACS-G-S015. Weight range approximately 600 g (0.05g) to 6000 g (0.1g). 9-1/2" Wide x 13-1/2" long infeed conveyor, 9-1/2" wide x 9-1/2" long weigh station. 9-1/2" wide x 21-1/2" long discharge conveyor. Mechanical arm reject. Ishida DACS digital automatic checking System, Panasonic HMI. 1/60/120-240 Volt. Serial# 100212015. Built 2016. Overall dimensions 46" x 39" x 56"T.
MFR: Ishida
Stock No.:
73630002Ishida DACS-G-S015 Inline Checkweigher – High Accuracy Conveyor Scale
Unused Ishida Model DACS Conveyor Mounted Checkweigher, Model DACS-G-S015-12/CR-I-S. Weight range approximately 600 g (0.05g) to 1500 g (0.1g). Infeed belt 6-1/4" wide x 14-1/2" long & 13-1/2" long x 6-1/4" wide. Weigh station 6-1/4" x 10" long. Discharge belt 6-1/4" wide x 18" long. Mechanical arm reject. Panasonic HMI. 3/60/240 Volt. Serial# 100212007. Built 2016. Overall dimensions 57" X 38" X 56"T.
MFR: Ishida
