Chemical Equipment
Stock No.:
49317050Used Cummins 750 kW Diesel Generator – DQFAA, Tier 2, 480V Capable, UL2085 Tank, Passed Load Test
Used-750 kW standby (680 kW prime) Cummins diesel generator set, model DQFAA, SN-H070098040. Cummins QST30-G5 engine rated 1490 HP at 1800 RPM, SN-37229540, EPA Tier 2 emissions. 3/60/120/208V, 12 lead reconnectable to 480V and other voltages. 2500 Amp 100% rated main-line circuit breaker. PMG permanent magnet generator. Oversized 1040 kW rated generator end. Engine cooling radiator rated 50C/122F ambient. UL 2200 listed stationary engine-generator-assembly. PowerCommand 2100 digital control panel. EnerGenius battery charger 10 amp 120/208/240V. Coolant heater 208/240/480V. Aluminum sound attenuated enclosure. 3600 gallon UL2085 sub-base fuel tank, with secondary containment. 792 Hours. Year 2007. Overall dimensions 113W x 341L x 165H, 60,000 lbs. (storage trailer in photo not included) Passed load test 2/11/2025.
MFR: Cummins
Stock No.:
53267017Used Circleville Metal Works 750 Gallon 304 Stainless Steel Mix Tank | Anchor Agitator | 5 HP Motor | Dished Top & Bottom
Used- Circleville Metal Works Inc. approximately 750 gallon Mix Tank. 304 stainless steel vertical 60" diameter X 60" high straight side. Internal rated 0.25 PSI @ 212 F. S/N CMW-940. Dished top and bottom. Top fittings: 20" manway, (2) 1.5", (2) 2", (3) 3", and (1) 4". 2" center bottom drain. Equipped with anchor style agitator driven by Philadelphia right-angle drive Model MT04. S/N 508380 rated 1750 RPM input, 84 RPM output. Powered by 5HP 3/60/230-460 volt motor. Mounted on (4) legs giving 27" clearance. Built 1975.
MFR: Circleville Metal
Stock No.:
54274001Used 750 Gallon Stainless Steel Vertical Mix Tank – Dual Turbine & Emulsifier (N
Used 750 Gallon Stainless Steel Vertical Mix Tank, Stainless Steel. Approximately 58" diameter x 60" straight side. Dome Top, Dome Bottom. Top center entering emulsifying agitator, no drive. Top offset entering Dual 3 turbine agitator Driven by an approximate 1.17HP 3/60/208-230/460v 1725rpm motor. Openings Top: 22" for agitator, 21" manway (no cover), 3", (4) 2", 2" side bottom outlet. 3" Center bottom outlet with 6" discharge height. Mounted on (4) stainless steel legs.
Stock No.:
54687072Used New Brunswick Scientific Co. 3000L (750 gallon) capacity Stainless Steel Tank. National Board #569. Diameter is 48” with a 72” straight side with jacket on the lower 24". Vessel- Max Allowable...
Used-New Brunswick Scientific Co. 3000L (750 gallon) capacity Stainless Steel Tank. National Board #569. Diameter is 48” with a 72” straight side with jacket on the lower 24". Vessel- Max Allowable Working Pressure 40PSIG/O PSIA. Jacket-Max Allowable Working Pressure 35 PSIG. Vessel- Max Temp. 300°F. Jacket- Max Temp. 300°F. Vessel- Hydrotest 80 PSIG. Jacket- Hydrotest 100 PSIG. The top has a 18”RFSO with blind flange with 4” sightglass, a 2” sightglass , one-¼” plug, one-½” plug, one- ¾” plug and one-1” threaded coupling on the neck. The top of the tank has a 1-1/2” agitator shaft (no motor included), ¾” threaded coupling, ¼” threaded coupling, one-1” 150lb. Pad flange, one-4” 150lb. Pad flange, and three lift lags. The upper 24” inch portion of the tank has three-2” threaded couplings, one-3/4” threaded coupling, one-1” threaded coupling with fitting, two-1” sanitary threaded, one-2” 150lb. Pad flange with blind, and one Ametek MNG DIV. Pressure Gauge on a 1”pad flange. The lower 48” jacketed portion has three-2” threaded couplings. Below the jacket is six--1” sanitary threaded. The bottom has one--2” pad flange with blind, one-½” valve with fittings, one-1” valve with fittings, one-2” valve with fittings, and 3 lift lugs.Built 1982. Sits on four carbon steel legs. Overall Size is 132” x 80”.
MFR: New Brunswick Scientific
Stock No.:
11252156Used CE Howard 7,500 Gallon Stainless Steel Jacketed Tank – 304 SS
Used- CE Howard 7,500 Gallon Stainless Steel Jacketed Tank, 304 stainless steel, measures 118" diameter x 162" straight side with dome top and flat bottom. Unit has dimple jacket wrapped around bottom section of tank, 48" high, rated for 85 PSI at 300 degrees Fahrenheit to negative 20 degrees Fahrenheit. Includes (1) 4" diameter side bottom outlet, (2) 2" top ports and (3) 3" top ports with 22" x 10" manhole.
MFR: C E Howard
Stock No.:
40425076Unused Watson Metal Masters 7,500 Gallon 304 Stainless Steel Tank – 122" Diameter x 153" Straight Side – Built 2021
Unused Watson Metal Masters 7,500 Gallon Stainless Steel Tank, Manufactured in 2021. Constructed of 304 stainless steel with approximately 122" diameter x 153" straight side. Features a dome top, flat bottom, and 20" side bottom manway for interior access. Rated for atmospheric pressure at 100 F internal temperature. Overall height approximately 170". Manufacturer: Watson Metal Masters. Serial number: 7067-1. Suitable applications include atmospheric liquid storage, bulk ingredient holding, and process liquid storage for compatible food, beverage, chemical, and industrial liquid products.
MFR: Watson
Stock No.:
40425077Unused Watson Metal Masters 7,500 Gallon 304 Stainless Steel Tank – 304 SS – Built 2021 – Atmospheric Storage Vessel
Unused Watson Metal Masters 7,500 gallon 304 stainless steel atmospheric storage tank, built 2021. Approximately 122" diameter 153" straight side with dome top and flat bottom; about 170" overall height. Rated atmospheric at 100F internal. 20" side-bottom manway. Serial #7068-1. Suitable for propylene glycol and other atmospheric liquid storage.
MFR: Watson
Stock No.:
53587001Unused Tarmac Int. Inc. Heat Exchanger – 768 Sq. Ft., 1.8 MMBTU/H, Stainless Steel
Unused- Tarmac Int. Inc Heat Exchanger, (Never set up on the Hot side). Model 48-30DPL48-0.625-IU. 768 sqft. Stainless steel. Size: 48"*48"*54.25, CFM: 8100 CFM. Material: High temperature SST, Surface area: 768 Ft square. Total heat transfer rate: 1.8 MMBTU/Hour. Type: Plate/plate heat exchanger. Max Temp Hot Gas Inlet: 662 F. Efficient: 64.3%. Suitable to handle particulate gases from solid combustion and also applicable in clean combustion Outlet temp hot side: 249F , 11 GA. 304 S.S. casing with 18 GA. 304 S.S. expansion joints at 3 connections, 12 Ga. C.S. cladding with 3 x 3 x C S flanges primed and painted. STRUCTURAL STAND EQUAL TO OR LESS THAN 5 HEAT EXCHANGER ELEVATION. Year 2021. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
53267147Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package – Natural Gas & Lube Oil Air-Cooled Heat Exchanger System
Used Smithco Model 1F30-111-2 Four-Bundle Fin-Fan Cooler Package Natural Gas & Lube Oil Air-Cooled Heat Exchanger System. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
Stock No.:
53267156Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations
Smithco Four-Bundle Air-Cooled Heat Exchanger Package for Natural Gas Compression and Lube Oil Cooling Operations. S/N 108432-B. Overall dimensions are 31.5' long X 11.1' wide X 12.67' tall. Unit consists of (2) lube oil coolers, Natural gas cooler #1 and Natural gas cooler #2. Lube cooler 1 has 3" 300# inlet and outlet and (98) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 330 PSIG @ -20 to 350 F. Bare Sq ft. 770.3, Extended Sq Ft. 16,310. Natural gas cooler CLR-1 has 6" 300# inlet and outlet and (34) 1.25" 304 tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 300 PSIG @ -20 to 350F. Bare Sq ft. 334, Extended Sq Ft. 6,542. Lube cooler 2 has 2" 300# inlet and outlet and (54) 1" 304 stainless steel tubes configured in 4 rows 2-pass 30' long. Fin type L-tension aluminum. Rated 450 PSIG @ -20 to 350 F. Bare Sq. ft. 424.4 Extended Sq ft 8,986. Natural gas cooler CLR-2 has 4" 300# inlet and outlet and (26) 1.25" 304 stainless steel tubes configured in 4 rows 2 pass 30' long. Fin type L-tension aluminum. Rated -20 to 350 F. Bare Sq ft. 255.4, Extended Sq. ft. 5,003. Unit has (2) 20HP COFIMCO model 49 5000 fans 10' diameter consisting of (5) aluminum blades with adjustable pitch and 10 degree angle. Motors are 3/60/460 volt. Fans driven by belt driven speed reducer. Rated 122,800 ACFM. Galvanized structure. Built 2010, Weight 22,800#.
MFR: Smithco Engineering
