Chemical Equipment
Stock No.:
53183003Unused Komarek DH-300 Heavy-Duty Briquetting Press – 2–10 Tons/Hr, 75-Ton Roll Force, 75 HP
Unused Komarek Heavy-Duty Two-Roll Briquetting Press, Model DH-300. 75 tons of roll separating force. Rated throughput of 2-10 tons/hour depending on briquette size and density. Roll dimensions: 13'' - 20.5'' diameter x 4'' - 13'' width. Driven by a 75 HP motor. Gravity fed. Possible applications include briquetting and compacting operations for carbon based fuels, inorganic chemicals, mineral ores, industrial by-products, and metal powders. Serial# 051740-1-1, built 2022.
MFR: Komarek Greaves
Stock No.:
53189002Used Eirich RV-15 Mixer – 750L, 1200 kg Capacity, 75 HP Tool, 304 Stainless, Industrial Intensive Mixer
Used- Eirich Mixer, Model RV-15. 304 stainless steel product contact surfaces. Approximately 750 liter bowl. 1200 kg max capacity. 75 hp mixing tool. 10 hp pan motor. On board lubrication system with 2 hp pump. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Eirich
Stock No.:
53385002Amherst 75 Gallon Agitated Stainless Steel Pressure Tank
Used- Amherst Stainless Steel Pressure Tank, Approximately 75 Gallon, 304L Stainless Steel, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, (2) 2", 1/2". Center bottom outlet with manual ball valve. (1) 500 PSI Basket Strainer and Bag Filter. Control panel. Mounted on (4) legs with casters. National Board# 1472, Serial# 1707, Built 2021. Previously used for raw materials used in the production of molded fiber products.
Stock No.:
53385004Amherst 304L Stainless Steel 75 Gallon Vertical Pressure Tank
Used- Amherst 304L Stainless Steel Pressure Tank, Approximately 75 Gallon, Vertical. Approximate 30" diameter x 22" straight side. Dished top and bottom heads. Internal rated 130 psi at -20 to 150 degrees F. Top entering 3-blade prop agitator, driven by 0.5 HP, 3/60/230/460 volt, 1725 rpm gear motor, 5 to 1 ratio. Openings top: 8" handhole with cover, 3", (2) 2", 1". 3" Center bottom outlet with manual valve. Mounted on (4) legs with casters. National Board# 1379, Serial# 1601, Built 2020. Previously used for raw materials used in the production of molded fiber products.
Stock No.:
53690001Used Belshaw Adamatic OVEN 2020 Double Rack Oven – 275,000 BTU/hr | Natural Gas/Propane | 2 B-Style Racks | 2019
Used- Belshaw Adamatic Double Rack Oven, Model OVEN 2020. Natural gas or propane with automatic electric switch over; 275,000 btu/hr; Stainless steel construction; Heavy duty rack lift, accepts A, B, or C-styles, 46" long B-style lift, with spare lift for (2) B-style single racks; 39" wide x 75" tall door; 10" diameter exhaust, with 10" to 12" diameter adapter; Dayton 12" diameter exhaust fan; Oven is 72" wide x 62" long plus 30" long exhaust hood; Stainless steel floor insert; Natural Gas or Propane (Electronic automatic switch over). 3/60/208/240V New in May 2019.
MFR: Belshaw
Stock No.:
54001001Unused Machine & Process Design RigiMill 2436 Hammermill – 75 HP, USDA/3A Sanitary, 24,000 lbs/hr, 2025
Unused Machine & Process Design RigiMill Model 2436 sanitary fixed-blade hammermill with 304 stainless steel construction. Features approximately 24" diameter x 36" long rotor driven by a 75 HP, 3600 RPM motor. Rated for approximately 24,000 lbs/hr throughput on lactose and whey, with 98% of product passing through 40 mesh based on manufacturer testing. Equipped with approximately 36" x 10.75" bolted-flange inlet throat and discharge-area screen with 0.76" diameter perforations. Includes bearing temperature and vibration sensors. Overall dimensions approximately 98" long x 57" wide x 42" high. Designed to meet FSMA, GMA and 3-A/Dairy standards and USDA approved. Mill was tested only and has never been used. Built 2025.
MFR: Machine & Process Design
Stock No.:
54382001Industrial Compressed Air System with (2) Ingersoll Rand Compressors, Dryers & Air Receivers
Used Fully Integrated Compressed Air System. System is centered around an Ingersoll Rand Rotary Screw Compressor, Model R55I-A125; ~29,637 runtime hours, 328 CFM Capacity, 115 PSIG Rated Operating Pressure, 125 PSIG Maximum Discharge Pressure, Nominal Drive 75hp, Nirvana VSD. System has centralized air storage, drying, filtration, and hard-piped distribution. System consists of: 1st Compressor, and 2nd Ingersoll Rand Rotary Screw Compressor (~15,276 runtime hours): (2) Air Receiver Tanks (400 and 1,200 gallon); (3) industrial line dryers (dual-tower configuration); Inline Compressed Air Filters (Multi-stage particulate and coalescing filtration); Main Compressed Air Distribution Header with Associated Piping. Designed for continuous industrial operations.
MFR: Ingersoll-Rand
Stock No.:
54535001Unused Stedman FC 2215 Full-Circle Air-Swept Hammer Mill – 75 HP Grinding & Size Reduction System
Unused Stedman FC 2215 Full-Circle Air-Swept Hammer Mill 75 HP Grinding & Size Reduction System. 22" diameter x 15" wide rotor housing, 360 degree screen coverage around the rotor to maximize the active escape area for properly sized material, minimizing over-grinding and elevating total production capacity, Built-in turbulence channel at the bottom of the rotor, Features a specialized housing design that provides quick, direct access to remove and replace internal sizing screens, Fully reversible operation. Driven by a 75 hp, 3/60/460V, 3600 rpm motor. Serial # FC1968, Built 2021. Includes low voltage WEG control panel.
MFR: Stedman
Stock No.:
54547001Used Rietz RS-28-K5408 Dual Shaft Double Ribbon Blender – 60 Cu. Ft. Working Capacity – 304 Stainless Steel
Used- Rietz Manufacturing Co. Dual Shaft Double Ribbon Blender, Model RS-28-K5408. Approximate 60 cu. ft. working capacity, 75 cu. ft. total capacity, and can process approximately 4,000 to 5,000 pounds per batch, depending on product bulk density. Engineered for high-capacity, heavy-duty batch mixing in demanding industrial processing environments. Constructed with 304 stainless steel product contact surfaces, this blender is designed to provide rapid, efficient, and highly uniform mixing of dry powders, granules, bulk solids, and products requiring liquid addition. (2) 28" counter-rotating dual ribbon agitators that utilize a counter-flow ribbon design to move material both axially and radially, producing fast, thorough, and homogeneous blending while minimizing product degradation. The heavy-duty dual shaft design, utilizing chain or gear-driven independently driven ribbon assemblies, provides reliable performance and excellent product turnover for consistent batch-to-batch results. Designed to handle both dry materials and products requiring liquid addition, the mixer is equally well suited for blending powders, granules, slurries, and other process materials. Product discharge is accomplished through dual air-operated (pneumatic) bottom end discharge doors, allowing rapid, controlled, and virtually complete batch evacuation while minimizing residual product. The unit is mounted on a heavy-duty four-leg stainless steel frame and is equipped with safety grates, protective guarding, and hinged covers to enhance operator safety and simplify loading and inspection. Its sanitary stainless steel construction makes it well suited for food, pharmaceutical, nutraceutical, chemical, agricultural, mineral, plastics, and other industrial processing applications requiring durability, corrosion resistance, and ease of cleaning. The mixing chamber measures approximately 72" long 56" wide 36" deep and operates at an output speed of approximately 30-35 RPM.
MFR: Rietz
