Chemical Equipment
Stock No.:
10151633Used Mueller 5,700 Gallon Jacketed Pressure Tank | 21,000 Liter Stainless Steel Fermentation Vessel
Used Mueller 5,700 Gallon Jacketed Pressure Tank | 21,000 Liter Stainless Steel Fermentation Vessel, Model F.95" ID x 155" T/T. 268" OAH.Internal 25 psi at 100 degrees F, Jacket rated 100 psi at 100 degrees F.304 stainless steel, vertical, dish top and cone bottom, 16" bottom manway with 3" CBO.Serial # 384634-4, Built 2008.Previous use was brewing beer.
MFR: Mueller Corp
Stock No.:
48325001Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11 long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692A. National Board # 3606. Built 2012.
MFR: Joseph Oat Corp.
Stock No.:
48325002Unused Joseph Oat Corporation 8-Pass U-Tube Shell & Tube Heat Exchanger – 5,700 Sq Ft, Carbon Steel Shell, 304L SS Tubes
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11' long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692B, National Board # 3607. Built 2012.
MFR: Joseph Oat Corp.
Stock No.:
41174072Used Escher Wyss ZW 2350 Double Drum Dryer | 1,000 kg/hr | Industrial Drum Drying System
Used Escher Wyss Model ZW 2350 industrial double drum dryer with rated processing capacity of 1,000 kg/hr (2,200 lbs/hr). Features two drums measuring 1,500 mm (58.5") diameter x 2,500 mm (97.5") straight side, operating at 26 RPM. Heating pressure rated at 8 bar (120 pounds per square inch) with heating steam pressure of 4 bar (60 pounds per square inch). System includes (1) blower, (1) dust collector, sifter, 5-station sack filling unit, and additional supporting infrastructure. Previously used for processing concentrated skim milk with 45% dry matter content.
MFR: Escher Wyss
Stock No.:
54687141Used MAC model 47-RFHC stainless steel reverse pulse jet dust collector has two (2) 30" long dust collector cartridges with 295 sq. ft. of filter media each. With a 47" diameter, 96" straight side, a...
Used-MAC model 47-RFHC stainless steel reverse pulse jet dust collector has two (2) 30" long dust collector cartridges with 295 sq. ft. of filter media each. With a 47" diameter, 96" straight side, and 70" cone length, this dust collector totals to be about 57" w x 64" l x 174" h. There is a flanged clean air outlet that measures 3.25". Discharge port is 10". Serial no. 28415-012-1.
MFR: MAC
Stock No.:
54687142Used MAC model 47-RFHC stainless steel round reverse pulse jet dust collector holds (2) 30" long dust collecting cartridges with 295 sq. ft. of filter media. There are 3 load cell sensors. With a 47"...
Used-MAC model 47-RFHC stainless steel round reverse pulse jet dust collector holds (2) 30" long dust collecting cartridges with 295 sq. ft. of filter media. There are 3 load cell sensors. With a 47" diameter, 124" straight side, and 70" cone length, this dust collector totals to be about 57" w x 64" l x 232" h. There is a flanged clean air outlet that measures 2". Attached to the discharge port is a MAC multi-duty rotary valve blow-thru. Serial no. 28415-001-1
MFR: MAC
Stock No.:
14191145Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation
Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.
MFR: Sharples
Stock No.:
409352Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI
Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.
MFR: Vulcan
Stock No.:
47890001Lodige FKM600D Plow Mixer
Used- Lodige Model FKM600D batch-type plow mixer with 6 cubic feet working capacity and 10 cubic feet total capacity. 304 stainless steel, non-jacketed mixing chamber approximately 32" diameter x 50" long with 4" diameter shaft, (3) bolt-on plows, (2) bolt-on end scrapers, (2) 18" x 15-1/2" side access doors, and (2) 12" top openings. 9" x 7" bottom outlet with manually operated door and air-purge seals. Serial # 9046. Driven by an approximately 10 hp motor through Falk reducer. Includes control panel with Allen-Bradley PanelView 600 and SLC 5/04 CPU. Mounted on carbon steel stand. Suitable for dry powders, premixes, granular ingredients, spices, nutraceuticals, feed additives, chemical blends, and similar products.
MFR: Lodige
Stock No.:
50058011Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | Stainless Steel | 1-Year Warranty
Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | 1-Year Warranty, stainless steel construction (product contact areas, max bowl speed 6000 rpm, single lead conveyor w/welded hardfacing wear protection, base, casing, feed pipe, 95:1 planetary gearbox, (New) 10 HP Main Drive motor, (New) 5 hp backdrive motor, mounted plate w/ vibration Isolations. Mounted on approx. 4 stainless steel stand w/casters, safety guards, (New) programable logic control/drive panel. (Reconditioned with warranty)
MFR: Sharples
Stock No.:
50467009Buy Used 6" PFA Jacketed Column – Heat Transfer & Corrosion Protection
Used- 6" PFA lined column, jacketed.
MFR: Unknown
