Chemical Equipment
Stock No.:
10749155Used Fabsco 284 Sq Ft Horizontal Shell & Tube Heat Exchanger, Duplex 2205 Tubes, 2023
Used Fabsco 284 Square Foot Horizontal Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 150 psi at 32 to 150 degrees F, 14' Tube length, 3/4'' tube diameter. 21'' Shell diameter. Carbon steel head. Carbon Steel shell rated 265 psi at 32 to 300 degrees F. National Board #11171, Serial #S21-13258-7, built 2023.
MFR: Fabsco
Stock No.:
10749157Fabsco Shell & Tube Heat Exchanger, 284 Sq Ft, Duplex Stainless Tubes, Carbon Steel Shell
Used Fabsco Horizontal 284 sq. ft. Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 150 psi at 32 to 150 degrees F, 14' Tube length. Carbon steel head. Carbon Steel shell rated 265 psi at 32 to 300 degrees F. 21'' Shell diameter. National Board #11170, Serial #S21-13258-6, built 2023.
MFR: Fabsco
Stock No.:
45477002Used Heat Transfer Systems 2,858 Sq. Ft. U-Tube Shell & Tube Heat Exchanger
Used Heat Transfer Systems horizontal U-tube shell and tube heat exchanger with approximately 2,858 sq. ft. of heat transfer surface area and carbon steel construction. Carbon steel shell is rated for 80 psi at -20 to 250 degrees F. Equipped with (280) carbon steel 3/4" diameter x 26' long tubes rated for 100 psi at -20 to 150 degrees F, with carbon steel tube sheet and head. Shell-side openings include 4" and 14", with (2) 12" tube-side openings. Unit is mounted on carbon steel saddles. Serial #12915-2, National Board #1802. Overall dimensions approximately 30'6"L x 36"W x 60"T with a weight of approximately 17,600 lbs. Possible applications include industrial process heating, cooling and heat recovery service with suitable process fluids compatible with carbon steel construction.
MFR: Heat Inc
Stock No.:
53674003Xylem Shell and Tube Heat Exchanger
Unused- Xylem Shell and Tube Heat Exchanger. 26.6 square meter (286.3 square feet) effective surface area, Horizontal. Carbon-steel shell. Shell side: 171 PSI at -20 to 500 degrees F.. Tube side 221 PSI at -20 to 500 degrees F. Copper-Nickel (CuNi 90/10) tubes. NB #316316. Built 2019. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
Stock No.:
50420001Ellett Industries Shell & Tube Heat Exchanger. Used
Used- Ellett Industries Shell & Tube Heat Exchanger, 2890 Square Foot, Vertical. Single pass. (1125) Zirconium (SB-523) 3/4" diameter x 13' 2" long tubes rated 50 psi at 400 degrees F. 304 Stainless steel shell rated 75 psi at 100 degrees F. Side lug mounted. Buddle: National board # 659. Serial # 43624. Built 2006. Shell & heads: National board # 49114. Serial # 4901035. Built 1989.
MFR: Ellet Mfg
Stock No.:
50619002Used Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge – 300 HP, 317 Stainless Steel
Used- Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge, 317 Stainless steel construction on product contact areas, maximum bowl speed 2600 rpm, 10" single lead conveyor with STC wear protection tiles, casing with stainless top cover, gearbox (95:1 ratio), air cooled lube system, 300 hp drive motor and sub-base with VFD, 3/60/460 volt, 1780 rpm, safety guards, feed pipe, backdrive stand and 75 hp motor, operations and control panels.
MFR: Alfa Laval
Stock No.:
70852Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800
Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Hagen & Rinau-Unimix
Stock No.:
54687133Used Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fit...
Used-Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fittings, an 1" threaded fitting, a 3" flanged fitting and an 8" flanged fitting. Top also has a 40" tall saftey railing around the tank. The 12" dish bottom has a 2" center discharge. Tank also has a 2" fill from bottom tube running from the top. Tank sits on 4 I-beam legs for a total height of 164". Good condition.
Stock No.:
10749158Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023
Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.
MFR: Fabsco
Stock No.:
10749159Fabsco Shell and Tube Heat Exchanger, 299 Square Foot
Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.
MFR: Fabsco
Stock No.:
10211226Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed
Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.
MFR: Fitzpatrick
Stock No.:
48417002Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel
Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.
MFR: Sturtevant
