Chemical Equipment
Stock No.:
54447001Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System
Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.
MFR: Denver
Stock No.:
54628001Used Oberlin OPF-24 Fully Automatic Horizontal Pressure Filtration System
Used Oberlin Fully Automatic Horizontal Pressure Filtration System, Model OPF-24. Serial/configuration OPF24-165MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.
MFR: Oberlin
Stock No.:
54628002Used Oberlin OPF-24 Pressure Filtration System – Up to 960 GPM
Used- Oberlin Model OPF-24 Fully Automatic Horizontal Pressure Filtration System. Serial/configuration OPF24-167MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.
MFR: Oberlin
Stock No.:
54630002Used Bird 3600 Stainless Steel Decanter Centrifuge – 24" x 60" Bowl, 30 HP with Hard-Faced Scroll
Used Bird 3600 Stainless Steel Decanter Centrifuge 24" x 60" Bowl, 30 HP with Hard-Faced Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.
MFR: Bird
Stock No.:
54630003Used Bird 3600 Industrial Dewatering Centrifuge – 24" x 60" Stainless Bowl with Wear-Resistant Scroll
Used Bird 3600 Industrial Dewatering Centrifuge 24" x 60" Stainless Bowl with Wear-Resistant Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.
MFR: Bird
Stock No.:
71239Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel
Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.
MFR: Carrier
Stock No.:
79477Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel
Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.
MFR: American Process Systems
Stock No.:
79478Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows
Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.
MFR: American Process Systems
Stock No.:
52106002Unused Paul O. Abbe OPCM-67 Ceramic Ball Mill – 250L, 3 HP, 34 RPM
Unused- Paul O Abbe One Piece Ceramic Ball Mill, Model OPCM-67. 250 liter, 19% alumina content. Approximate 24.8" diameter x 31.9" long. 6.7" inlet/outlet, 39" discharge height from the top of the base plate to hatch. Driven by a 3 hp direct shaft mounted motor. 34 rpm maximum vessel rotation. Mounted on painted carbon steel stands on a painted carbon steel base. Serial# 196635OPCM.
MFR: Paul O Abbe
Stock No.:
456550062,400 Square Feet Alfa Laval Spiral Heat Exchanger
Used- Alfa Laval Thermal Horizontal Spiral Heat Exchanger, 2400 Square Feet, Model 1-H. 316 Stainless steel product contact areas. Hot and cold side rated 125 psi at 250 degrees F. Carbon steel removable heads with 316 stainless steel clad. Openings (4) 4". Mounted on carbon steel saddles. National Board# 13862, Serial# 18229. Year 1987.
MFR: Alfa Laval
