Chemical Equipment
Stock No.:
53147051Used Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer – 24” x 20’ ASME Rated
Used- Anderson Dahlen Stainless Steel Dual Screw Holoflite Dryer, 24" diameter X 20' long. Constructed from 316L stainless steel. Screws and jacket are rated for 100 PSI/FV @ 350 degrees / -20 degrees Fahrenheit. Previously used to dehydrate food waste. Previously heated by hot oil. ASME code built.
MFR: Anderson Dahlen
Stock No.:
53912001Stainless Steel 24” U-Trough Screw Conveyor with Thermal Heating & Cooling
Used- S. Howes U-Trough Thermal Processing Screw Conveyor, Model 24U24-JS. 24" diameter screw, 24' Long inside dimension. Oversized 16" diameter shaft pipe, Journals thru-bored to allow heating fluid flow through shaft. 22' Overall jacket length; 14.9 psig design pressure. Designed for thermal fluid heating/cooling media or low pressure steam. 316 stainless steel construction in product contact and jacket areas. 3" inlet/outlet on main body; 1" on heated/cooling screw. Fulton control panel 120-VAC, 1-Phase, 60HZ with 6 digital PID temperature controllers. 3 x 3" pneumatic valves for inlet fluid control on main body of screw conveyor. 1 x 1" pneumatic valve for inlet fluid control on screw. 10 x 3" manual gate valves for support plumbing, Sectional covers. Driven by a 15 hp, 3/60/460V motor. Machine # 117390, New in 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: S Howes
Stock No.:
54209003Used Kason 24" Portable Stainless Steel Screener | Model K-24-2-SS-P | 1/3 HP Motor | Includes Decks, Rings & Screens
Used Kason 24" Portable Stainless Steel Screener, Model K-24-2-SS-P, 1/3 HP Motor. Includes Decks, Rings & Screens. Driven by a 1/3hp, 3/60/460 volt, 1140rpm motor. Mounted on carbon steel cart with casters. Serial# KC-1045.
MFR: Kason
Stock No.:
54447001Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System
Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.
MFR: Denver
Stock No.:
54628001Used Oberlin OPF-24 Fully Automatic Horizontal Pressure Filtration System
Used Oberlin Fully Automatic Horizontal Pressure Filtration System, Model OPF-24. Serial/configuration OPF24-165MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.
MFR: Oberlin
Stock No.:
54628002Used Oberlin OPF-24 Pressure Filtration System – Up to 960 GPM
Used- Oberlin Model OPF-24 Fully Automatic Horizontal Pressure Filtration System. Serial/configuration OPF24-167MD. Features 24 square feet (2.23 m) of filtration area with nominal capacity up to 960 GPM on certain water-based applications or 400 GPM on 200-SSU oil. Rated for 45 psi maximum filter pressure, 115 psi maximum air supply pressure and 160 F maximum liquid temperature. Automatic cycle includes pressure filtration, cake formation, air drying, media advancement and dry-cake discharge using disposable filter media or a reusable cleanable belt. Approximate footprint: 145" L x 77" W x 82" H.
MFR: Oberlin
Stock No.:
54630002Used Bird 3600 Stainless Steel Decanter Centrifuge – 24" x 60" Bowl, 30 HP with Hard-Faced Scroll
Used Bird 3600 Stainless Steel Decanter Centrifuge 24" x 60" Bowl, 30 HP with Hard-Faced Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.
MFR: Bird
Stock No.:
54630003Used Bird 3600 Industrial Dewatering Centrifuge – 24" x 60" Stainless Bowl with Wear-Resistant Scroll
Used Bird 3600 Industrial Dewatering Centrifuge 24" x 60" Stainless Bowl with Wear-Resistant Scroll. Stainless steel construction in product contact areas. Features a 30 HP, 575V motor. Equipped with scroll featuring hard-faced flights and stellite feed nozzles for improved wear resistance. Includes discharge chute and belt guard, hydraulic power pack, and MCC control panel. Designed for continuous solid/liquid separation, clarification, solids recovery, and dewatering applications.
MFR: Bird
Stock No.:
71239Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel
Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.
MFR: Carrier
Stock No.:
79477Used - American Process TD-24 Cylindrical Plow Mixer, 24 Cu. Ft., Stainless Steel
Used- American Process Cylindrical Plow Mixer, Model TD-24, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4433.
MFR: American Process Systems
Stock No.:
79478Used American Process TD-24 Mixer - 24 Cu. Ft. Capacity, Fixed Plows
Used- American Process Model TD-24 Cylindrical Plow Mixer, Approximate 24 Cubic Feet Working Capacity, Stainless Steel. Non-jacketed chamber 30" diameter x 84" long, shaft with fixed plows and end scrapers. Driven by a 30 hp, 3/60/460 volt, 1780 rpm motor thru a Sew reducer, ratio 15.77 to 1. Openings top, (2) side access doors, center bottom outlet. Serial # 4431.
MFR: American Process Systems
Stock No.:
52106002Unused Paul O. Abbe OPCM-67 Ceramic Ball Mill – 250L, 3 HP, 34 RPM
Unused- Paul O Abbe One Piece Ceramic Ball Mill, Model OPCM-67. 250 liter, 19% alumina content. Approximate 24.8" diameter x 31.9" long. 6.7" inlet/outlet, 39" discharge height from the top of the base plate to hatch. Driven by a 3 hp direct shaft mounted motor. 34 rpm maximum vessel rotation. Mounted on painted carbon steel stands on a painted carbon steel base. Serial# 196635OPCM.
MFR: Paul O Abbe
