Chemical Equipment

Used Ross HDM-200 Double Planetary Mixer with 200 Gallon Capacity

Used Charles Ross & Son Model HDM-200 Double Planetary Industrial Mixer With 200 Gallon Maximum Working Capacity. Designed for heavy-duty batch mixing of compatible viscous and high-consistency materials, with an operating capacity range of 30 to 200 gallons. Equipped with (2) carbon steel planetary mixing stirrers operating at approximately 24 RPM orbital speed and 26 RPM stirrer rotation speed. Features a top dust hood with charging port, bottom fume hood and hydraulic lift system with dedicated hydraulic power pack for raising and lowering the mixing assembly. Includes (1) removable mixing can measuring 44" diameter x 33-3/4" deep. Driven by a 40 HP explosion-proof (XP) motor rated at 1,740 RPM, operating on 460 volts, 3-phase, 60 Hz electrical service. Power is transmitted through a Delroyd Model HV120 reduction gearbox with a 74.21:1 gear ratio. Mixer is mounted on a heavy-duty structural I-beam frame. Serial #35555. Additional mixing cans are available for purchase at an additional cost, subject to availability. Possible applications include batch mixing, blending, kneading and processing of compatible high-viscosity adhesives, sealants, coatings, pastes, putties, resins, polymer compounds, construction materials and other suitable industrial formulations.

MFR: Charles Ross

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME

Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.

MFR: Aaron Process

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System

Used Air Classifier Mill | 200 HP Industrial Milling & Powder Processing System. With TECO-Westinghouse 200 HP Mill Drive Motor and Toshiba 25 HP Classifier Motor. Last used on guar beans for making fracking lubricant.

Used New York Blower (NYB) PLR Wheel Industrial Fan | Class 4 | 200 HP Leeson Motor | Built 2016

Used- NYB Fan. PLR wheel type. Class 4. Driven by a 200hp 3/60/460V, 17866 RPM, model C445T17DB18A Leeson motor. Built 2016.

MFR: New York Blower

Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun

Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.

MFR: Unknown

Used Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-14. National Board # 9905. Internal is rated for 50 psi @ 450 f. The jacket is rated a 150 psi @ 450 f with a glycol medi...

Used-Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-14. National Board # 9905. Internal is rated for 50 psi @ 450 f. The jacket is rated a 150 psi @ 450 f with a glycol medium. Shell is also rated for full Vacuum. The tank is 36" in diameter with 32" straight side height and 8" dish bottom and dome top. Agitator is a 3 blade prop type with a 200 rpm Philadelphia 1 hp motor drive. The top has a 18" manway cover with pnuematic assist and glass view port. Top also has (3) 2" sanitary fittings, (3) 3" sanitary fittings and a 6 flange fitting with a glass view port. The bottom has a 2" sanitary center discharge. The side has 3" flange fittings (currently covered with a blind flange). Requires 230 vac 3 ph electrical supply. Built in 1984. Good Condition.

MFR: Paul Mueller

Used Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-15. National Board # 9906 Interior is rated for 50 psi @ 450 f. The shell is rated a 150 psi @ 450 f with a glycol medium. S...

Used-Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-15. National Board # 9906 Interior is rated for 50 psi @ 450 f. The shell is rated a 150 psi @ 450 f with a glycol medium. Shell is also rated for full Vacuum. The tank is 36" in diameter with 32" straight side height and 8" dish bottom and dome top. Agitator is a 3 blade prop type with a 200 rpm Philadelphia 1 hp motor drive. The top has a 18" manway cover with pnuematic assist and glass view port. Top also has (3) 2" sanitary fittings, (3) 3" sanitary fittings and a 4" flange fitting with a glass view port. The bottom has a 2" sanitary center discharge. The side has 3" flange fittings (currently covered with blind flange). Requires 230 vac 3 ph electrical supply. Built in 1984. Good Condition.

MFR: Paul Mueller

Used National Turbine 7 stage centrifugal blower. According to the curve it can blow 3,000 cfm @10 psi, 4,000 cfm @ 8.5 psi. Model # NT88307-5-00-2-AD. Serial # 2111020. Driven by 200 hp electric m...

Used-National Turbine 7 stage centrifugal blower. According to the curve it can blow 3,000 cfm @10 psi, 4,000 cfm @ 8.5 psi. Model # NT88307-5-00-2-AD. Serial # 2111020. Driven by 200 hp electric motor. Blower has 8" air intake and 8" export ports. Requires 460 vac 3ph electrical supply. Overall dimensions 40" wide x 83" tall x 100" tall. Curve on file.

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtra...

Used U.S. Filter Company Auto jet self cleaning (rotating leaves) vertical pressure leaf filter. This unit is insulated for chill filtering. It has 16 each 34" rotating leaves vertical mounted filtration screens on a horizontal rotating shaft. Quick openning head. 2.5" and 3.5" Inlet and 6'' diameter discharge. Driven by 1/2 hp a Duty Master Motor 1725 RPM. Requires 230/460 vac 3 ph. The Unit has 68" x 84" overall width and length and 87" overall height. Shell tested as 304 stainless.

MFR: US Filter

Used Micro Air RP8 Dust Collector – High Capacity Industrial Air Filtration System

Used Micro Air Model RP8 Dust Collector. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

Buy Used Micro Air RP8 Dust Collector – 2,000 Sq Ft Filter Area System

Used Micro Air Dust Collector, Model RP8. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air