Chemical Equipment
Stock No.:
53607001Used GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge
Used- GEA Westfalia MSA-40-06-076 Desludger Disc Centrifuge. Stainless steel construction (product contact areas, max bowl speed 4800 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, 25 hp drive motor 230/460/3/60. Last used to clarify apple juice. .
MFR: GEA Westfalia
Stock No.:
54061001Unused GEA Westfalia FSE300 Disc-Stack Centrifuge | 9,000 L/hr | XP-Rated | 2024 Build | CIP & Skid-Mounted
Unused GEA Westfalia Disc-Stack Centrifuge, Model FSE300, with 316 stainless steel product contact surfaces. Rated 9,000 L/hr hydraulic capacity with 4,5004,800 RPM bowl speed and 24-liter solids space. Equipped with semi-continuous piston solids ejection, hydro-hermetically sealed low-shear inlet, self-cleaning bowl for fully automatic CIP, and 55 kW (73.75 HP) motor. XP-area rated unit includes control panel and skid-mounted construction. Built 2024. Suitable for clarification and liquid-solid separation of food, beverage, fermentation, chemical, pharmaceutical, biotechnology, and other process liquids.
MFR: GEA Westfalia
Stock No.:
54311001Used GEA Westfalia Disc Centrifuge FSE 10-06-077 for Sale – Stainless Steel, 12,000 RPM
Used GEA Westfalia Disc Centrifuge, Type FSE 10-06-077. Stainless steel construction (product contact areas). 12,000 rpm max. bowl speed. Clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, approx. 5.5 HP drive motor (3/60/460V.) Control system w/PLC. SN 1741-517. Built 2022.
MFR: GEA Westfalia
Stock No.:
54638001Used Westfalia SA-7-01-576 Desludger Disc Centrifuge – 316 SS, 8,520 RPM Separator
Used- Westfalia SA-7-01-576 Desludger Disc Centrifuge. 316 Stainless steel construction (product contact areas), max bowl speed 8520 rpm, separator design (liquid/liquid/solids separation), 4 kw (5.36hp) 380/3/50 drive motor. Water harness, operators control panel, misc. tools.
MFR: GEA Westfalia
Stock No.:
53493005Used GEA Niro Swirl Fluidizer Flash Dryer – 55 kg/hr Evaporation, Stainless Steel Skid
Used GEA Niro Swirl Fluidizer/Agitated Flash Dryer System designed for continuous drying of slurry, paste, and filter cake materials. System includes controls, an inlet air gas heater, and a stainless steel fluidizing slurry tank measuring approximately 3' diameter x 3' high with a bottom-mounted scraped-wall blade agitator and outlet to a screw conveyor. The complete system is mounted on an approximately 86" x 87" x 82" stainless steel skid for a compact installation. Operating specifications include an airflow capacity of 450 to 630 kg/hr, inlet air temperatures from 100 to 350 C, outlet air temperatures from 60 to 150 C, water evaporation capacity from 0 to 55 kg/hr, maximum powder production rate of 100 kg/hr, and maximum feed rate of 150 kg/hr. The system is configured for operation with natural gas or propane fuel and was built in 2009. Previously used for drying cellulose pastes prior to filtration. Missing cyclone filter.
MFR: Gea-Niro
Stock No.:
49938005Used GE AKTA Process Chromatography Skid – UNICOR Control | AxiChro Packing | USP Class VI | Built 2011
Used- GE AKTA Process Chromatography Skid. Traceable USP Class VI materials; Versatile user-configuration with UNICOR control; Intelligent packing of AxiChro columns; Post-purchase configuration increasing usability and lifespan; Electrical, 100-240VAC, 50/60Hz, 0.75kW, 6.3 Amps, 1 HP. Serial # 28990393; Built 2011.
MFR: General Electric
Stock No.:
50708010Unused Highland Tank Model 150LR Automatic Grease Interceptor | 304 SS | 202.5 Gal | 150 GPM | Immersion Heaters & Control Panel
Unused - Highland Tank Automatic Grease Interceptor, Model 150LR, 304 Stainless Steel Construction. 202.5 Gallon capacity, 150gpm flow rate. Approximately 30" wide x 72" long 35" deep vessel. 6" dia top inlet, 6" dia top side outlet, (2) 3" dia end bottom drains. (4) immersion heaters, mounted control panel. Serial# 6000006086-b.
MFR: Highland
Stock No.:
51258014Used Haas Shred-Tech 1500E Dual Shaft Industrial Shredder – Tyson Series High Capacity 25–38 TPH
Used- Haas Shred Tech heavy Duty Dual Shaft Shredder, Model 1500E. Tyson Series slow speed shredder. Rated 25 - 38 Tons/hr. 1500 x 1500 shredding chamber. 700mm cutting diameter. Infeed and outfeed belt. (2) 90kw electric motors. Multifunctional display. Low noise emission.
MFR: Haas
Stock No.:
54687004Used Heinkel HF300 Hastelloy C4 Inverting Filter Centrifuge
Used Heinkel HF300 Hastelloy C4 Inverting Filter Centrifuge. Type HF300, Serial #1028/12. Designed for solid-liquid separation using a filter medium that retains solids during centrifugation, followed by inversion of the filter cloth for discharge of the dewatered product. Bowl is driven by a 7.5 HP hydraulic motor and operates at approximately 3,460 rpm, producing up to 1,500 x g centrifugal force. Bowl diameter is approximately 11.81" with approximately 1.07 square feet of filter area and approximately 1.7 gallon product capacity. Overall dimensions are approximately 80" long x 36.5" wide x 42" high. Electrical requirements: 460V, 3-phase. Shipping weight approximately 5,000 lb. Unit appears to have seen little or no operation, although operating history cannot be confirmed. Possible applications include dewatering, filtration and solids separation of compatible pharmaceutical, fine chemical, specialty chemical and other process products requiring contained batch centrifugation.
MFR: Heinkel
Stock No.:
43567004Used Lewa HK16-3 Stainless Steel Metering Pump – 3 Heads, 133 LPH Each, 1.3 kW Motor
Used- Lewa Metering Pump, Type HK16-3, Stainless Steel. (3) 30 mm Pump heads, each 133 liters per hour (0.58 gallons per minute). Driven by an approximate 1.3 kw, 3/50/220/380 volt motor. Includes a control panel. Mounted on a stainless steel frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Lewa
Stock No.:
43567005Used Lewa HK16-3 Stainless Steel Multi-Head Metering Pump – Precision Chemical Dosing
Used- Lewa Type HK16-3 Metering Pump, Stainless Steel. (3) 30 mm Pump heads, each 133 liters per hour (0.58 gallons per minute). Driven by an approximate 1.3 kw, 3/50/220/380 volt motor. Includes a control panel. Mounted on a stainless steel frame with casters. located in UK. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Lewa
