Chemical Equipment

Used Carrier Vibrating Equipment Model FTDII/AD2490S Stainless Steel Vibratory Fluid Bed Dryer System

Used Carrier Vibrating Equipment Model FTDII/AD2490S stainless steel vibratory fluid bed dryer, Serial #27748, built 2012. System includes an inclined discharge screw conveyor approximately 12" diameter x 12' long with magnet, Kongslide blower, control panel, Stelter & Brinck direct-fired gas air heater, flame control panel, MAC cyclone, rotary valve, assorted blowers and sock filter. Possible applications include continuous drying and cooling of suitable powders, granules, crystalline solids, filter cakes, fibrous materials and other bulk products.

MFR: Carrier

Used Witte Model 42 x 12' PE Pellet Fluid Bed Cooler / Dryer – 45" x 12'10" Shaker Deck with Natural Gas Heat

Used Witte Model 42 x 12' PE Pellet Fluid Bed Cooler / Dryer 45" x 12'10" Shaker Deck with Natural Gas Heat, Serial Number 5263. Used Witte fluid bed cooler, 45" wide x 12'10" long, set up for heat. Equipped with Siemens 3 HP shaker motor, Power Flame FD300 natural gas burner with RCP FD300 control box, induction blower, temperature regulators, shaker deck with tension springs, removable hood with safety chain, fabricated induction ducting and cylindrical exhaust hood. Screen in great condition with no bends or clogs; shaker, motor, burner, blower and temperature controls function as intended. Shaker fluid changed January 2026. Stand measures 12'2" long x 5' wide x 8'4" high, 10'5" high to safety hoist. Includes approximately 12' wide x 14' long induction ducting and 28' long x 12" wide x 31" deep outlet ducting. Previously used for PE pellets and suitable for heating, drying, conditioning or cooling compatible plastic pellets and free-flowing granular products.

MFR: Witte

Used 2008 Applied Chemical Technologies 10 Sq. Ft. Vibrating Fluid Bed Dryer – 30 HP Blower & Power Flame Burner

Used 2008 Applied Chemical Technologies 10 Sq. Ft. Vibrating Fluid Bed Dryer 30 HP Blower & Power Flame Burner, set up for heat with stainless steel stand, body, induction hood and exhaust hood. Equipped with Reliance Electric 30 HP blower motor and Power Flame 4x Micro Burn burner. Screener deck is in good condition with no unintended holes. Unit was operated in August 2026 and includes burner spare parts and an additional non-functioning burner. Assembly is arranged on four skids for burner assembly, blower fan and coil, induction unit and fluid bed dryer, with exhaust duct requiring an additional skid. Dryer with hood measures 9'6" high x 8' long x 3'4" wide; dryer only measures 34" wide x 8' long x 7' high; overall length with induction ducting is 19'10". Built 2008. Suitable for heated fluid bed drying and processing of compatible free-flowing granular and particulate products.

MFR: Applied Chemical Technology

Used 2019 Union Process QL-25 Circulation Attritor – 27.5-Gallon Grinding Tank, 250-Gallon Recirculation Tank & 40 HP Drive

Used- Union Process Circulation Attritor System, Model QL-25. Grinding tank capacity of 27.5 gallons. Includes approximately 250 gallon recirculation tank equipped with anchor stirrer and mixer. Unit is driven by a 40 HP motor. Maximum pumping rate of 35 gpm depending on grind media and slurry viscosity. 3/60/460V. Serial # 190402, built 2019. Possible applications and suitable products include wet grinding and dispersion of coatings, inks, pigments, chemicals, minerals, metal oxides, and other pumpable slurries requiring fine and uniform particle size reduction.

MFR: Union Process

Used APV Type P-E Single-Effect Plate Evaporator – 2,050 Lb/Hr Design

Used APV Type P-E 2,050 Lb/Hr Single-Effect Finisher Evaporator With 316 Stainless Steel Plate Sections. Employs a forced-circulation rising-falling film evaporation process and includes the evaporator frame with (16) Type 316 stainless steel plate units containing 65 total plates, a 30.5" Type 316 stainless steel snail-shell vertical separator, Type 304 stainless steel barometric condenser with steam ejector, and interconnecting vapor tubing. System was designed for a feed rate of approximately 5,590 lb/hr at 190 F with 9.0% suspended solids and 20.20% soluble solids, producing approximately 3,540 lb/hr of product at 31.9% soluble solids and 185 F, with a designed evaporation rate of approximately 2,050 lb/hr. Unit was originally designed for 19 plate units; (3) plate units are missing, so evaporation capacity will be lower as currently equipped. Additional plate units may be installed to restore the original designed evaporation rate. Overall footprint is approximately 8' wide x 9' long x 8'2" high and the system can be disassembled for shipping. Previously used for processing spent mash. Plate gaskets appear to be in good condition. Serial #1340. Good condition. Possible applications include evaporation and concentration of compatible food, beverage, fermentation, distillery, chemical and other liquid process products requiring removal of water and increased solids concentration.

MFR: APV

Used Fluid Air 0020P MagnaFlo MagnaCoater Fluid Bed Processor

Used Fluid Air Model 0020P MagnaFlo / MagnaCoater Fluidized Bed Dryer, Granulator And Coating System. Stainless steel lab-to-pilot scale processing system capable of fluid bed drying, granulation and Wurster coating. Equipped with a 46 liter total-volume process bowl with maximum granulating capacity of approximately 34 liters and maximum coating capacity of approximately 31 liters. Unit is mounted on casters for portability. Electrical requirements: 230V, 3-phase. Serial #10200. Overall dimensions are approximately 90" wide x 38" deep x 79" high. Possible applications include fluid bed drying, granulation and Wurster coating of compatible pharmaceutical, nutraceutical, food, chemical and other powder or particulate products.

MFR: Fluid Air

Used APV 24" x 28' Stainless Steel Desulphurizing Column

Used APV stainless steel desulphurizing column measuring approximately 24" diameter x 28' high and equipped with (15) valve trays. System was designed for approximately 1,000 imperial gallons per hour of grape juice and used for reducing sulphur dioxide concentration from approximately 1,550 ppm to 100 ppm. Includes preheater shell and tube heat exchanger. Possible applications include sulphur dioxide removal and desulphurization of compatible grape juice and other suitable liquid food or beverage processing streams.

MFR: APV

Used TUG electric tow tractor is model# MX4 400, serial number 850007, capacity 4000lbs, built November of 2002. TUG has AC drive system. TUG is 57" wide x 117" long x 66" tall. TUG has warning light...

Used-TUG electric tow tractor is model# MX4 400, serial number 850007, capacity 4000lbs, built November of 2002. TUG has AC drive system. TUG is 57" wide x 117" long x 66" tall. TUG has warning light attached. Mirrors require repair. Two Nutting quad steer trailers each with 4000 lbs capacity with accurate tracking/trailing characteristics for optimal precision maneuverability. Follows directly behind the electric tow tractor. Deck size is 50" wide x 98" long.

Used Kinematica Megatron model MT3-95-3A in-line homogenizer. Type 316L stainless steel construction. Disperses and emulsifies via a rotor/stator shear generator. Operates at 3600 rpm driven by a 35...

Used-Kinematica Megatron model MT3-95-3A in-line homogenizer. Type 316L stainless steel construction. Disperses and emulsifies via a rotor/stator shear generator. Operates at 3600 rpm driven by a 3540 rpm 50 hp motor. Homogenizing generator is equipped with a single mechanical seal and a cooling jacket. Internal operating pressure is 150 psi at 245 F. Flow rate up to 50 gpm (water) depending on product. Requires 440 vac 3 ph electrical power. Assembled on a stainless steel frame with adjustable feet. New 2000. Serial number R95579. Good condition.

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 1880.

MFR: Hi-Vac

Used Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5...

Used-Hi-Vac model 240 industrial vacuum system is rated for up to 800 cfm. Belt driven by a 40 hp, 1770 rpm motor that requires 208-230/460 vac, 3 ph electricity. Inlet diameter is 3". Unit has a 1.5 yard dump hopper with automatic dust bag shaker and air lift. Serial no. 3227.

MFR: Hi-Vac

Used Kason Model K72-1-SS 72" Single-Deck Circular Vibratory Screener With 2 HP Motor

Used Kason Model K72-1-SS 72" single-deck circular vibratory screener. Unit includes one 18" deep carbon steel upper section with one 18" center opening, (2) 8" openings and one 16" x 8" covered oval side discharge. Screener has one 18" deep stainless steel deck with a funneled 10" bottom opening and 5.5" top opening. Mounted on a 36" high carbon steel base and driven by a 2 hp motor requiring 230/460 VAC, 3-phase electrical service. Approximate overall dimensions are 108" x 80" x 80". Job #83113. Serial #M7128. Manufactured May 2006. Possible applications include screening, scalping, sizing and separation of compatible powders, granules, dry ingredients and other suitable bulk solids.

MFR: Kason