Cannabis Industry Equipment

Used R.A Jones Aerofill 1695 Ultraflex | High-Speed Rotary Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex "Gasser Shaker" Rotary 18 Head TTV. Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

R.A Jones (Aerofill) Model 1695 | 18-Head Rotary TTV Gasser Shaker

Used- (Aerofill) R.A Jones Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

Buy Unused Aesus Premier Shrink Sleeve Applicator — 150 CPM Capability

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

MFR: Aesus

Used Aesus Delta Chuckcap Automatic Single Chuck Capper – 60 CPM

Used- Aesus Model Delta Chuckcap Automatic Single Chuck Capper. Capable of speeds up to 60 containers per minute. Has intermittent motion carton indexing with two station tightener (1 pre-spin station, 1 final torqueing station). Cap size range: 0" to 5" diameter x 0" to 1" thick (with changeparts). Bottle size range: 0" to 10" diameter x 0" to 12" tall. Allen Bradley Mircologix 1400 PLC, A/B Panelview Plus 600 HMI, Panasonic servo drives. Pneumatic height adjustment. Includes cap sorting elevator (oversized), for flat caps up to 5" diameter. Last used in nutritional supplement packaging operation. 1/60/208 Volt.

MFR: Aesus

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander – Up to 120 Containers Per Minute

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander Up to 120 Containers Per Minute. Bander is rated for speeds from 20-120 containers per minute (depending on application). Has film requirements of: 5mm to .07mm (thickness) with a layflat of 40mm-150mm and a cut length of 20mm-50mm. Has stepper motor controls and butterfly mandrel. Set up for unregistered clear film. Built 2016. 1/60/220V.

Brand-New Alfa Laval PU 625 Disc Stack Centrifuge | 3000 L/hr | 12,000 RPM | Industrial Oil Purification

Brand-New Alfa Laval PU 625 Disc Stack Centrifuge | 3000 L/hr | 12,000 RPM | Industrial Oil Purification. This high-performance separator is engineered for the continuous purification of industrial oils such as lube oil, fuel oil, and light process liquids. Designed with a high-speed disc stack bowl operating at approximately 12,000 RPM, it delivers exceptional separation efficiency with automatic discharge of both water and sludge phases. The system offers a throughput capacity of up to 3,000 liters per hour, depending on product characteristics. Constructed in stainless steel and mounted on a factory-original skid, the unit includes integrated piping, valves, and an electric inlet heater for optimal processing temperature. With a motor rated around 4.5 to 5.5 kW, this centrifuge is ideal for marine, energy, and industrial applications where clean oil and reliable operation are critical. Still in original conditionnever installed, never operatedthis is a rare opportunity to acquire a top-tier Alfa Laval unit ready for immediate deployment.

MFR: Alfa Laval

Alfa Laval BRPX-313-XGD-75-60 Desludger Disc Centrifuge, 18 kW Motor, PLC Controls (Used)

Alfa Laval BRPX-313-XGD-75-60 Desludger Disc Centrifuge, 18 kW Motor, PLC Controls (Used), 316 stainless steel contact areas, concentrator design, centripetal pump liquid discharge, 18kW (approx. 24 HP) 575/3/60 drive motor, Allen Bradley Micrologix 1100 PLC. Mounted on frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Alfa Laval MOPX-207-SGT-14-60 Desludger Disc Centrifuge – Stainless Steel Bowl, 17.5 HP Motor (Used)

Alfa Laval MOPX-207-SGT-14-60 Desludger Disc Centrifuge Stainless Steel Bowl, 17.5 HP Motor (Used). separator design (liquid/liquid/solids separation), centripetal pump liquid discharge, cast iron base assembly, flanged direct drive configuration, approximate 17.5 hp drive motor 575/3/60, control, water harness. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Alfa Laval Vertical Disc Stack Centrifuge – Model USPX 204SGT-11CN-60, 8500 RPM, 3 HP, Refurbished

Fully refurbished. Used- Alfa Laval Vertical Disc Stack Centrifuge, Model USPX 204SGT-11CN-60. Solids ejecting. 8500 RPM max. bowl speed. Stainless steel contact parts. Driven by a 3hp 3/60/440v 3525rpm motor. Serial# 3535293, built 1999. Still in wrapping from refurbish and ready to go.

MFR: Alfa Laval

Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator

Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator-31CGL. Stainless steel construction. 65 cubic meters/hour max. throughput capacity. 4,480 max. bowl speed. 45 kW (approx. 60 HP), 3/60/480V motor. Skid mounted. With control panel and VFD motor starter. Unused since being fully refurbished.

MFR: Alfa Laval

Alfa Laval PX 55 Desludger Disc Centrifuge-Used

Used- Alfa Laval PX 55 Desludger Disc Centrifuge, Stainless steel contact parts, 6240 RPM max. bowl speed, clarifier design, centripetal pump liquid discharge, 15L (3.91 gal.) bowl volume; 4.6L (1.2 gal.) sludge space; /max. process temperature; 25 HP motor. 3/50-60/380-500V. Built 2017. Previously used for soybean oil.

MFR: Alfa Laval

Alfa Laval Disc Centrifuge, Model LAPX 404SGP-31G/CG.

Used- Alfa Laval Disc Centrifuge, Model LAPX 404SGP-31G/CG. Clarifier, 316 Stainless steel. Max bowl speed 9600 RPM, 11,000 x G, rated @ 4000 LPH, max solids capacity 33 LPH, 0-100C temp range. Liquid discharged under pressure, low shear disc inlet design, 3.7 KW motor 460/3/60/3600 RPM, sludge tank, piping, tools, Year 2021

MFR: Alfa Laval