Cannabis Industry Equipment

Used Heat Transfer Systems 2,858 Sq. Ft. U-Tube Shell & Tube Heat Exchanger

Used Heat Transfer Systems horizontal U-tube shell and tube heat exchanger with approximately 2,858 sq. ft. of heat transfer surface area and carbon steel construction. Carbon steel shell is rated for 80 psi at -20 to 250 degrees F. Equipped with (280) carbon steel 3/4" diameter x 26' long tubes rated for 100 psi at -20 to 150 degrees F, with carbon steel tube sheet and head. Shell-side openings include 4" and 14", with (2) 12" tube-side openings. Unit is mounted on carbon steel saddles. Serial #12915-2, National Board #1802. Overall dimensions approximately 30'6"L x 36"W x 60"T with a weight of approximately 17,600 lbs. Possible applications include industrial process heating, cooling and heat recovery service with suitable process fluids compatible with carbon steel construction.

MFR: Heat Inc

Xylem Shell and Tube Heat Exchanger

Unused- Xylem Shell and Tube Heat Exchanger. 26.6 square meter (286.3 square feet) effective surface area, Horizontal. Carbon-steel shell. Shell side: 171 PSI at -20 to 500 degrees F.. Tube side 221 PSI at -20 to 500 degrees F. Copper-Nickel (CuNi 90/10) tubes. NB #316316. Built 2019. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Ellett Industries Shell & Tube Heat Exchanger. Used

Used- Ellett Industries Shell & Tube Heat Exchanger, 2890 Square Foot, Vertical. Single pass. (1125) Zirconium (SB-523) 3/4" diameter x 13' 2" long tubes rated 50 psi at 400 degrees F. 304 Stainless steel shell rated 75 psi at 100 degrees F. Side lug mounted. Buddle: National board # 659. Serial # 43624. Built 2006. Shell & heads: National board # 49114. Serial # 4901035. Built 1989.

MFR: Ellet Mfg

Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800

Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Hagen & Rinau-Unimix

Used Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fit...

Used-Caldwell tanks 2900 gallon stainless steel vertical tank. Serial # 5658-3. Tank is 90" in diameter with a 90" straight side height. 12" dome top has a 24" bolted man cover, (2) 2" threaded fittings, an 1" threaded fitting, a 3" flanged fitting and an 8" flanged fitting. Top also has a 40" tall saftey railing around the tank. The 12" dish bottom has a 2" center discharge. Tank also has a 2" fill from bottom tube running from the top. Tank sits on 4 I-beam legs for a total height of 164". Good condition.

Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023

Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.

MFR: Fabsco

Fabsco Shell and Tube Heat Exchanger, 299 Square Foot

Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.

MFR: Fabsco

Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel

Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.

MFR: Scott Turbon

Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer

Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.

MFR: Ross Industries

Used Myers Engineering model V550/500A-3-3 vacuum mixer has a 14" diameter x 14" deep stainless steel jacketed tank that is rated for 14 psi maximum. Mixing blades are lowered/raised via air over oi...

Used-Myers Engineering model V550/500A-3-3 vacuum mixer has a 14" diameter x 14" deep stainless steel jacketed tank that is rated for 14 psi maximum. Mixing blades are lowered/raised via air over oil lift. Driven by two (2) variable speed 3 hp motors that are UL tagged for hazardous locations and require 230/460 vac, 3 ph electricity. Unit is equipped with vacuum cover but not vacuum pump. High speed agitator has a 1.25" diameter shaft with a 4" sawtooth blade. Slow speed agitator has 3 blades on bottom that extend 10" up the sides as wipers. Unit is also equipped with a safety chain for the tank. Serial no. 673

MFR: Myers

Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI

Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,

MFR: Ketema