Cannabis Industry Equipment
Stock No.:
10131007Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application
Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Kurimoto Osaka
Stock No.:
10131008Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader
Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Kurimoto Osaka
Stock No.:
734380053M-Matic 800af Adjustable Box Sealer | 28 Cases per Minute Performance
Used- 3M-Matic Model 800af Adjustable Top Only Case Sealer, Type 39600. Capable of speeds up to 28 cases per minute, depending on application. Case size range 150mm to 760mm (6" - 30") length x 120 to 545mm (4.75" - 21.5") x 120 to 620mm (4.75" - 24.5") height. Weight 5 lbs to 85 lbs. Serial# 3447. 1/60/115 volt, 3.8 amp.
MFR: 3M
Stock No.:
73569011Used 3M-Matic 8000A Adjustable Case Sealer – AccuGlide Taping Head, 40 CPM (2019)
Used 3M-Matic Model 8000A Adjustable Case Sealer with AccuGlide Taping Head. Rated for up to 40 cases per minute. 4.25" to 27.75" (108mm - 704.9mm) max box height, 4.5" to 21.5" (114.3mm - 546.1mm) max box width. 6" to Unlimited box length. 2" Tape head. Side Belt drive system. Uniform Box Types. 1ph/60Hz/120V requirements. Type: 11500 Serial# 21946 M, built 2019. Overall dimensions 70" x 43" x 65"T.
MFR: 3M
Stock No.:
10151515Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86
Used- Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86. Bottom discharge; 904L stainless steel shell, 316 stainless steel jacket; Shell rated 75 psi/FV at 397 degrees F; Half pipe jacket rated 100 psi/FV at 392 degrees F; Base rated 150 psi/FV at 370 degrees F; 10 hp main drive; hydraulic pack; Serial # F69653-1185-1; National Board # 17935; Built 1986 (Rebuilt since).
MFR: Rosenmund
Stock No.:
47577005Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System
Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Scott Turbon
Stock No.:
83818Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls
Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.
MFR: Keith Machinery
Stock No.:
53844015Used Littleford Model DVT-130 Mixer/Reactor – High-Performance Industrial Proces
Used Littleford Model DVT-130 Mixer/Reactor, Stainless Steel. 3.1 Cubic feet working capacity (4.6 total). Jacketed chamber approximately 20" diameter x 26" long, bolt-on flat hinged jacketed cover. Jacket rated 75 psi at 32 to 320 degrees F. Internal rated 100 psi / Full vacuum at 32 to 320 degrees F. Side chopper motor, driven by 15hp, 3/60/230/460 volt, 3495 rpm (not installed). Includes control panel with voltage/phase indicators, gauges, piping. National Board#4298. Serial# 41779-4298. 3/60/480 Volt.
Stock No.:
54100001GEA Ecoflex VT10 Plate Heat Exchanger For Sale – 145 PSI, 212°F Rated – Approx.
Used- GEA Ecoflex GmbH Plate Heat Exchanger, Model VT10 CDS-17. Approximately 40 square foot area. Approximate (44) Stainless steel plates 31" x 8-1/2" wide. Operating pressure 0 to 145 psi (0 to 10 bar). Operating temperature 32 to 212 degrees F (0 to 100 degrees C). 2" Inlet/outlets. Mounted in an expandable frame. Serial# 169/16856.
Stock No.:
54249001Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023
Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023. 304 stainless steel construction. Single deck, double separation. 75 lbs/min maximum sift rate. Stainless steel top cover. 3ph/230-460V, 1200 RPM XP motor. Built 2023. Previously used for flour.
MFR: Kason
Stock No.:
47577006Used Ross HSM-40 Vacuum Double Helical Mixer Reactor – Stainless, Jacketed, Explosion-Proof
used- Ross HSM-40 Vacuum Double Helical Mixer Reactor, 316 stainless steel. This unit will mix most things that a double planetary mixer will mix, and in many cases, better and faster. Unit has air/oil lift mechanism to raise and lower the drive to allow the removal of the mix tank. Designed for operations under vacuum & a positive pressure of 35 psi @ 350f, jacket maximum allowable working pressure 100 psi @ 350f. Minimum design metal temperature 0f at 100 psi.7.5hp motor. ross metal fabricators Serial# 11801-1, National Board# 463, CRN 15925. stainless steel contact parts. jacketed mix can with provision for thermocouple, insulated with sheathing. explosion proof motor runs on 575 volts, 3 phase, 60 hz. no controls. mixer dimensions for the ross hsm-40: 43" w x 68" l x 91" h lowered position tank id is about 23 and about 27.5 deep. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Ross Industries