Cannabis Industry Equipment
Stock No.:
52862013Doyle and Roth Shell & Tube Exchanger – 20.2 Sq Ft, Side Lug Mount
Used- Doyle and Roth Shell and Tube Vertical Heat Exchanger, Approximate 20.2 Square Feet. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20732, Serial# S1989-2, 2008. No bottom head.
MFR: Doyle & Roth
Stock No.:
10986027Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer
Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.
MFR: JBT Foodtech
Stock No.:
11252214Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket
Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.
MFR: Hamilton
Stock No.:
42467005Used Carbon Steel Blower – 200 HP, 8" x 44" Housing, 12" x 36" Inlet
Used- Blower, Carbon Steel. Approximate 8" x 44" housing. Driven by a 200 HP, 460 Volt, 3570 RPM motor. 12" x 36" inlet, 8" x 16" outlet.
MFR: No
Stock No.:
44974Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed
Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
50059005Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt
Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.
MFR: Howard
Stock No.:
51065004Used Ross HDM-200 Double Planetary Mixer with 200 Gallon Capacity
Used Charles Ross & Son Model HDM-200 Double Planetary Industrial Mixer With 200 Gallon Maximum Working Capacity. Designed for heavy-duty batch mixing of compatible viscous and high-consistency materials, with an operating capacity range of 30 to 200 gallons. Equipped with (2) carbon steel planetary mixing stirrers operating at approximately 24 RPM orbital speed and 26 RPM stirrer rotation speed. Features a top dust hood with charging port, bottom fume hood and hydraulic lift system with dedicated hydraulic power pack for raising and lowering the mixing assembly. Includes (1) removable mixing can measuring 44" diameter x 33-3/4" deep. Driven by a 40 HP explosion-proof (XP) motor rated at 1,740 RPM, operating on 460 volts, 3-phase, 60 Hz electrical service. Power is transmitted through a Delroyd Model HV120 reduction gearbox with a 74.21:1 gear ratio. Mixer is mounted on a heavy-duty structural I-beam frame. Serial #35555. Additional mixing cans are available for purchase at an additional cost, subject to availability. Possible applications include batch mixing, blending, kneading and processing of compatible high-viscosity adhesives, sealants, coatings, pastes, putties, resins, polymer compounds, construction materials and other suitable industrial formulations.
MFR: Charles Ross
Stock No.:
52905003Hamilton 200 Gallon Triple Motion Stainless Steel Kettle
Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.
MFR: Hamilton
Stock No.:
53147081Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer – All Stainless, 125 HP, Jacketed, ASME
Used Aaron Process 200 Gallon (26.74 cubic feet) capacity Vacuum Drying Sigma Mixer All Stainless, 125 HP, Jacketed, ASME. Cored shafts, jacketed trough, and double nobben blades. Model MBG200-125 All stainless steel construction. All parts are insulated and sheathed with 304 Stainless steel and polished to 150 - 180 grit finish. Mixing/drying chamber includes vacuum cover and is jacketed, rated for 200 PSI at 450 degrees Fahrenheit / negative 20 degrees Fahrenheit, ASME code constructed. Mixing chamber measures 48" x 40" x 44" deep and includes (2) 6" diameter flanged discharges with ball valves. Blades are overlapping double nobben blades and driven by 125 HP motor thru heavy duty gearbox, 160 Amps and 460 volts. Manufactured in 2000. Serial number 00200125643MBG. Previously used in clean room type environment. Complete with control panel and unitized on heavy duty frame. Includes main control panel, power panel with starters and VFD's, steam-to-water heat exchanger for heating of jacket and hydraulic pump/reservoir for opening vessel lid. Also includes top mounted, stainless steel Mikro Pulsaire dust collector, Model 10-2-FV TR.
MFR: Aaron Process
Stock No.:
54280002Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun
Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.
MFR: Unknown
Stock No.:
54687049Used Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-14. National Board # 9905. Internal is rated for 50 psi @ 450 f. The jacket is rated a 150 psi @ 450 f with a glycol medi...
Used-Paul Mueller 200 gallon 304 stainless steel Reactor. Serial # P11720-14. National Board # 9905. Internal is rated for 50 psi @ 450 f. The jacket is rated a 150 psi @ 450 f with a glycol medium. Shell is also rated for full Vacuum. The tank is 36" in diameter with 32" straight side height and 8" dish bottom and dome top. Agitator is a 3 blade prop type with a 200 rpm Philadelphia 1 hp motor drive. The top has a 18" manway cover with pnuematic assist and glass view port. Top also has (3) 2" sanitary fittings, (3) 3" sanitary fittings and a 6 flange fitting with a glass view port. The bottom has a 2" sanitary center discharge. The side has 3" flange fittings (currently covered with a blind flange). Requires 230 vac 3 ph electrical supply. Built in 1984. Good Condition.
MFR: Paul Mueller
