Cannabis Industry Equipment
Stock No.:
54110002Used Doyle & Roth Shell & Tube Heat Exchanger | 1963 Sq. Ft. | Alloy 400 Tubes | 300 PSI | 2006/2018
Used Doyle & Roth Shell & Tube Heat Exchanger | 1963 Sq. Ft. | Alloy 400 Tubes | 300 PSI | 2006/2018. Monel/Alloy 400 tube side construction. Full vac/300 psig shell side design pressure; 390 psig shell side test pressure; 650/15 degrees F shell side max./min. design temp.; 1 pass shell side. Full vac/250 psig tube side design pressure; 325 psig tube side test pressure; 650/15 degrees F tube side max./min. design temp.; 3 pass shell side. OAD: 32" D x approx. 248" L. (300) 1.25" D x 240" L tubes. Built 2006, Repaired by Ohmstede in 2018. NB #20179. Original SN S-1443-4, new SN 824114.
MFR: Doyle & Roth
Stock No.:
54687107Used MitterNight Boiler Works 1970 gallon 304ss mix tank. Tank has 2" internal coil that circles tank 4 times about 1/3 the way up the tank. The coil is rated at 100 psi @ 200 f. The internal tank...
Used-MitterNight Boiler Works 1970 gallon 304ss mix tank. Tank has 2" internal coil that circles tank 4 times about 1/3 the way up the tank. The coil is rated at 100 psi @ 200 f. The internal tank is rated at 25 psi at 200 f (tank is missing manway cover). The tank has a 2" stainless steel agitator with two props but has no drive. The 12" dome top has (3) 1", (1) 2", (3) 3" and (1) 4" flanged fittings with 18" manway. The 12" dish bottom has a center 12" flanged discharge. Tank measures 72" diameter x 96" straight side with 12" dish bottom and top. The overall dimensions are 88" diameter x 158" tall.
MFR: Mitternight Boiler Works
Stock No.:
42584002Unused 2022 Lleal AME-1250-SF Industrial Mixer/Extruder – 1,400 Liter Stainless Steel, 80 HP Mixing, 40 HP Extrusion, ATEX Rated
Unused 2022 Lleal AME-1250-SF Industrial Mixer/Extruder 1,400 Liter Stainless Steel, 80 HP Mixing, 40 HP Extrusion, ATEX Rated. Designed for heavy-duty industrial mixing and extrusion applications. Unit features a stainless steel mixing vessel with a 1,400-liter total capacity and 750-liter / 198 Gallon working capacity. Equipped with two mixing blade drive motors providing a combined 60 kW / 80 HP and a 30 kW / 40 HP extruder screw drive. Unit is configured for ATEX / Ex explosion-proof operation (Group II). Electrical requirements are 400 V, 3-phase + N + PE, 50 Hz, 173 amps, with total installed power of 90.25 kW. Overall dimensions approximately 4,143 mm L x 2,635 mm W x 1,950 mm H (163" x 104" x 77"). Manufactured in 2022, Serial No. 18725/1, Item No. 5904. Unit is unused and in like-new condition.
MFR: Leal
Stock No.:
10151644Used Patterson-Kelley 2 Cu. Ft. Stainless Steel Twin Shell V-Blender – 60 Lb./Cu. Ft. Density Rating
Used- Patterson-Kelley approximately 2 cubic foot stainless steel Twin Shell V-Blender. Rated for a maximum material density of 60 lbs. per cubic foot. Unit has provision for an intensifier bar; intensifier bar is not included. Model: Twin Shell Dry Blender.
MFR: Patterson Kelley
Stock No.:
10151645Used Patterson-Kelley 2 Cu. Ft. 316 Stainless Steel V-Blender – 270 Lb./Cu. Ft. Rating with Intensifier Bar
Used- Patterson-Kelley approximately 2 cubic foot Twin Shell V-Blender constructed of 316 stainless steel. Rated for a maximum material density of 270 lbs. per cubic foot. Equipped with an intensifier bar for enhanced mixing and dispersion. Unit is mounted on a stainless steel frame with casters for portability.
MFR: Patterson Kelley
Stock No.:
11059409Used Patterson-Kelley 2 Cu. Ft. Sanitary Stainless Steel V-Blender – Pharmaceutical Finish, 25 RPM with Dispersion Bar Provision
Used- Patterson Kelly 2 Cu.Ft. Twin Shell V Blender. Sanitary, Stainless Steel with Pharmaceutical grade finish. Rated 60 Lbs./Cu.Ft. material density. Unit has provisions for Liquid/Solids dispersion Bar. (No Bar installed) Shell has chain driven 3/4 HP, 208-220/440 volt with gear reducer for 25 RPM output. Bar drive is 2 HP with belts and guard. 6" Discharge with butterfly valve. 37" floor clearance. 14" charging ports with removable vented covers. Last use was pharmaceutical.
MFR: Patterson Kelley
Stock No.:
53011006High-Efficiency APV Crepaco W20/20 Pump – 105 GPM, 3500 RPM
High-Efficiency APV Crepaco W20/20 Pump 105 GPM, 3500 RPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9296-95.
MFR: APV/Crepaco
Stock No.:
53011009APV Crepaco Unused W20/20 Stainless Steel Pump – 105 GPM, 95 Head Feet
APV Crepaco Unused W20/20 Stainless Steel Pump 105 GPM, 95 Head Feet. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9317.
MFR: APV/Crepaco
Stock No.:
53011010Unused APV Crepaco W20/20 Centrifugal Pump – 5HP Motor
Unused APV Crepaco W20/20 Stainless Centrifugal Pump 5HP Motor. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9318.
MFR: APV/Crepaco
Stock No.:
53011011Unused Industrial-Grade APV Crepaco W20/20 Centrifugal Pump
Unused- Industrial-Grade APV Crepaco W20/20 Centrifugal Pump, Stainless Steel. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Serial# H-9319.
MFR: APV/Crepaco
Stock No.:
53011014Unused Reliable APV Crepaco W20/20 Pump – 2” Inlet & Outlet, 5HP Motor
Unused-Reliable APV Crepaco W20/20 Pump 2" Inlet & Outlet, 5HP Motor. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9292-95.
MFR: APV/Crepaco
Stock No.:
53011015Stainless Steel APV Crepaco W20/20 Centrifugal Pump – Unused, 105 GPM
Stainless Steel APV Crepaco W20/20 Centrifugal Pump Unused, 105 GPM. Approximate 105 gallons per minute, 95 head feet @ 3500 rpm. Approximate 2" inlet, 2" outlet. Driven by a 5hp, 3/60/230/460 volt, 3500 rpm motor. Serial# H-9293-95.
MFR: APV/Crepaco
