Cannabis Industry Equipment

Used PMI ST-601 Large Frame Shrink Tunnel | 18" x 48" Chamber | 41.5" Conveyor

Used PMI Model ST-601 Large Frame Shrink Tunnel. Chamber height: 18" x Width: 48". Conveyor width: 41-1/2", conveyor height: adjustable legs from 36" - 42". Overall dimensions 13-1/2' x 80". 3/60/480 volt.

MFR: PMI

Stainless PMR 1300 Filler Sealer for Tubs & Cups – Dual Lane, Rollstock, 30 CPM

Used- PMR Model 1300 Dual Lane Cup/Tub Filler Sealer Lidder. Stainless Steel Sanitary. Rated at approximately 30 containers per minute. Dual lane. Current container diameter is approximately 6". Has roll stock heat sealer and die cutter, and overlidder. All stainless steel sanitary system. 440 volt system. Allen Bradley Micrologic controller. Allen Bradley Powerflex speed controller. Allen Bradley Panelview 300 control pad. Unit is portable on casters. 19' overall in length, 48" wide, 65" high.

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

High-Speed Shrink Wrap Bundler with Integrated Tunnel – Poly Pack CMS-24-HL

Used- Poly Pack CMS-24-HL Shrink Bundler. Continuous motion design capable of speeds up to 55 bundles/trays per minute. Has 25-1/2" wide seal jaw, jaw travel height of 13", and 75" long x 24" wide x 18" tall shrink tunnel. Allen Bradley Micro Logix 1400 PLC, A/B Kinetix 300, and Schneider Magelis HMI. Equipped with infeed belt conveyor 41" long x 19-3/4" wide, transfer infeed belt conveyor through film 26-1/2" long x 21-1/2" wide, and outfeed roller conveyor 153" long x 25" wide. All stainless steel frame with integrated shrink tunnel. Cooling fans on discharge. Last used in pharmaceutical packaging operation with 21" wide film. Right to left operation, mounted on casters. 480V/3Ph/60Hz. Footprint 22' long x 64" wide x 82" tall. Built in 2011.

MFR: PolyPack

Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System

Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System. Belt to belt transfers, infeed conveyor belt 32 in. long x 19.75 in. wide x 40 in. tall, discharge conveyor belt 17 in. long x 19.75 in. wide. Seal bar 26 in. wide, currently set for 7.5 in. tall clearance. Heat tunnel with SS rod belt 120 in. long x 26 in. wide x 40 in. tall. Tunnel 60 in. long, aperture 27 in. wide x 14 in. tall, with ambient cooling fan on discharge. Digital temp controls for tunnel and seal bar. PLC Controls with Idec programmable controller. Has stainless steel main frame. Electrical requirements 480-volt, 3 phase, 60 hz, 32 amp.

MFR: PolyPack

Used Polypack Model CHA-24HL-A Stainless Steel Bundler | 20 Bundles/Min | Servo Driven | Allen Bradley PLC | 240V | Cosmetic Packaging Line

Used Polypack Model CHA-24HL-A Stainless Steel Bundler | 20 Bundles/Min | Servo Driven | Allen Bradley PLC | 240V | Cosmetic Packaging Line. 4.5"W x 42"L table top chain infeed to pushing station for single or multi packs to secondary servo driven pusher to advance product through film. Allen Bradley Micrologix 1500 PLC. 3/60/240V. Last used in cosmetic application.

MFR: PolyPack

Used PolyPack CLP-24 Unsupported Print Registered Multipacker and Shrink Bundler

Used Polypack CLP-24 (3) Unsupported Print Registered Multipacker and Shrink Bundler. Capable of speeds up to 200 packs / minute, depending on setup. Currently set up for 12 oz. bottles in a 12 pack and 24 pack configuration, 16.9 oz. in 6 pack, 12 pack and 24 pack configuration and a 20oz in 24 pack configuration, 20oz Bullet 24 pack, 1 liter 6 pack and 12 pack, 1 liter Bullet 6 and 12 packs. 2.5 Mil film thickness. Set up to run print registered or clear film. Control panel with Schneider Electric Magelis HMI, Schneider electric PLC, Schneider electric variable speed drives and servo drives. Currently setup with 6 lanes. Serial# 3881. Built 11/2014. 3/60/480 Volt, 60 Amp. Overall footprint 520" long x 85" wide x 81" tall. Suitable for high-speed shrink bundling and multipacking of beverage bottles, bottled water, retail bottle packs, and unsupported multipack configurations using clear or print registered shrink film.

MFR: PolyPack

Used Portec LC-3848 90-Degree Belt Conveyor – 49.5” Wide

Used- Portec 90 Degree Belt Conveyor, Model LC-3848. Belt approximate 49-1/2" wide. Driven by a Lesson Hydro-Mec 1hp, 3/60/208-230/460 volt, 1725 rpm gear motor. Mounted on a frame. Serial# 141184.

MFR: Portec

Used Prater Vibratory Screener/Cleaner – Model VS2-36-1EX – For Parts Only

Used- Prater Vibratory Screener/Cleaner. Model VS2-36-1EX. For Parts Only.

MFR: Prater

Used Precision PMD Complete Tub And Tray Packing Line With High Tek Scale, Nita Labeler, Nitrogen Dosing And Case Sealer

Used Precision PMD complete tub and tray packing line previously running coffee products. Line includes a FormPack bulk bag unloading system with vibratory tray feeder, High Tek 20-head combination scale, Model HTMW-T5-2.5D-WD, with dual tray fill head, Nita Model XP400T front, back, top and bottom labeler, VBC nitrogen dosing system, Precision PMD tub/tray packing system, Axon EZ-300 shrink sleever, associated conveyor system and Wexxar top and bottom case sealer. Electrical requirements are 480 Volt, 3 phase, 60 Hz. Possible applications include integrated tub and tray packaging of coffee, dry foods, snacks, granular products and other products requiring bulk feeding, combination weighing, filling, nitrogen dosing, labeling, shrink sleeving, conveying and case sealing.

MFR: Precision

Used Preferred Packaging PP181228 Automatic Shrink Tunnel – High-Performance Industrial Shrink Wrapping

Used- Preferred Packaging Model PP181228 Automatic Shrink Tunnel. Chamber size: 18"W x 12"H x 28"L. Has live roller chain conveyor, approximately 16" wide x 39" long. 1/60/220Volt, 40 Amps. Serial# A580503.

MFR: Preferred Packaging

Used ProcePack SHLB-0 Pre-Roll Tube & Jar Labeling Machine | Up to 100 LPM | Stainless Steel | 240V

Used- ProcePack Pre-Roll Tube Labeling Machine, Model SHLB-0. Can handle tubes and jars of multiple sizes. Has a speed rating of up to 100 labels per minute (depending on size and application). Is of stainless steel construction. 3/60/240V.