Cannabis Industry Equipment

Used Nel Hydrogen Generator Model C30 – High-Purity 30 Nm³/h Hydrogen Production System (30 barg Output)

Used- Nel Hydrogen Generator, Model C30. Rated 30 Nm^3/hour (1140 SCFH) at 435 psig (30 barg), with 99.9998% purity. 3000 kPa (30 barg) hydrogen output pressure. 5 to 60 degrees C (41 to 140 degrees F) hydrogen temperature. 15.9 Nm^3/hour oxygen capacity. 5 to 60 degrees C (41 to 140 degrees F) oxygen temperature. 3/60/240V. Built 2019.

Unused Marchesini (Neri) BL-H235 Automatic Labeler – Wraparound for Mascara, Lip Gloss & Lipstick

Unused- Marchesini (Neri) Model BL-H235 Automatic Horizontal Pressure Sensitive Labeler for Mascara, Lip Gloss and Lipstick. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Siemens Touch screen control panel, Lenze 8400 drive, Park SL VD5NE5 drive. Includes Hitachi RX2 Ink jet printer. Conveyor 1-1/2" wide x 150" long. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate! 3/60/460 Volt.

MFR: Neri

Unused Marchesini BL-H235 Automatic Labeler – 200 CPM, Still in Crate

Unused- Marchesini (Neri) Automatic Horizontal Pressure Sensitive Labeler Model BL-H235 for Mascara, Lip Gloss and Lipstick. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Touch screen control panel for machine management. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate!

MFR: Neri

Uninstalled Marchesini BL-H235 Pressure-Sensitive Labeler for Cosmetics

Unused- Marchesini (Neri) Automatic Horizontal Pressure Sensitive Labeler for Mascara, Lip Gloss and Lipstick, Model BL-H235. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Touch screen control panel for machine management. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate!

MFR: Neri

Used New England NEHAE-60 High Speed Bulk Bottle Unscrambler

Used New England High Speed Bulk Bottle Unscrambler, Model NEHAE-60. Capable of speeds up to 400 containers per minute (depending on bottle size and configuration). Container size range: 5/8" to 6" (diameter) x up to 12" (height) and capable of handling a variety of sizes and shapes including round, oval, straight-wall, tapered, and non-tapered containers with proper change parts. Has an integrated bulk bottle cleated belt elevator. Allen Bradley Micrologix controls, HMI interface and lexan guarded. Machine can be retooled and set to size for your application. Ask your AEK sales representative for details. Lead time and pricing subject to receipt of samples.

MFR: New England Machinery

Used Nimco CP70 Spout Applicator/Welder – 28mm for 1/2 Gallon Gable Top Cartons

Used Nimco CAP PAC Model CP70 Spout Applicator/Welder Bench Unit. Designed to weld spouts on 95mm cross section cartons and last used on 1/2 gallon gable top cartons. The spout applicator is sized for a 28 mm spout.

MFR: Nimco

Nippon Tornado 2500 Shrink Tunnel System | 39" Preheat | 380V | Hot Air Tunnel

Used- Nippon Technology Solution Ltd./Tornado Hot Air Shrink Tunnel System, type 2500. Preheat area 39" (1000 mm), Tornado 360 deg. hot air heating area 19.5" (500 mm) Blowing hot air from four directions creates a tornado effect)). 380 volt/50-60 cycle/33 KvA. Control panel. Includes belt conveyor and round table.

MFR: Nippon

Used Nita XP-100 Servo-Driven Wraparound Labeler – 6" Label Width with Vision Verification System

Used- Nita Wraparound Labeler, Model XP-100 "Wrap Labeler." Machine is rated for speeds up to 3200" per minute (depending on label and product size). Has a standard 6" label width with 16" diameter rolls. Includes label web arbor and wrap station. Servo driven with label verification vision system. Stainless steel construction. Mounted on casters. PLC controls with 10" touchscreen operator HMI. 3/60/240V

Used Norden NM902 Automatic Hot Air Plastic Tube Filler | Up to 100 TPM | 1–300 mL Fill | Cassette Feeder & Chiller

Used Norden NM902 Automatic Hot Air Plastic Tube Filler | Up to 100 TPM | 1300 mL Fill | Cassette Feeder & Chiller. Capable of speeds up to 100 tubes per minute (depending on application). Tube size range: 50mm - 250mm (length) x 10mm - 50mm (diameter) with change parts. Fill volume range: 1ml - 300ml (with changeparts). Has an automatic cassette-style tube feeder, race track-style tube handling, and a single-piston filler. Has a stainless steel hopper, touch screen HMI and Thermo Scientific chiller.

MFR: Norden

Used Norden NM700HA Automatic Hot Air Plastic Tube Filler | Up to 70 TPM | 10–50 mm Diameter | Cassette Feeder & Chiller

Used Norden NM700HA Automatic Hot Air Plastic Tube Filler | Up to 70 TPM | 1050 mm Diameter | Cassette Feeder & Chiller. Capable of speeds up to 70 tubes per minute (depending on application). Tube size range: 10mm - 50mm (Diameter)x 50mm - 250mm (Length) with changeparts. Has Casette style tube feeder, stainless steel hopper. Machine weight approximately 2,000kg. With Thermo Scientific Recirculating Chiller

MFR: Norden

Pre-Owned Norden NM-400HA Tube Filling Machine – 300ml Max, CE Certified – Hot Air Sealing & #1 Fold Metal Tube Setup

Used- Norden NM-400HA Plastic Hot Air Tube Filler and Metal Tube Sealer. Capable of speeds up to 40 tubes per minute. Has automatic tube loader. Tube size range: 0.4" - 1.97" (10-50 mm) diameter x 1.97" - 9.65" (50-245 mm) high tube with change parts. Fill volume range: 0.034 - 10.15 fl oz (1-300 ml) per tube. Currently equipped with a 60mm diam piston for a fill size range: 25ml - 300ml. Includes metal tube parts for a number 1 fold. CE Certified. Elec: 3/60/208V. 100 psi air.

MFR: Norden

Unused Nordson Robot G4V 3-Axis Automated Fluid Dispensing System – 400 x 400 mm Work Area (2022)

Unused- Nordson Robot G4V 3 Axis Automated Fluid Dispensing System. 500/320 mm/s maximum speed. 3kg (6.6lb) Tool Payload. Working temperature 10-40 Degrees C (50-104 degrees F). Driven by a 5-phase micro-stepping motor. 400mm x 400mm x 100mm working area. Built 2022

MFR: Nordson