Cannabis Industry Equipment
Stock No.:
72808001Amsler Triblock Rinser/Filler/Capper Bottle Filling Line for Bottled Water & Soft Drinks
Used-Amsler Equipment Bottle Filling Line: Consists of Amsler Triblock Rinser/Filler Capper for Bottled Water or other Soft Drinks. Includes inline bottle drying system, Pack Leader inline labeler, Video Jet Date Coder, multipack shrink bundler and automatic stretch wrapper. Includes upstream systems 2) Inline UV Water cleaning system 3) Inline Oxygen and Nitrogen Generator 4) Inline Ozone Generator. 5) Inline Reverse Osmosis System. 6) 5 Holding Tanks Each has capacity of 4,500 Litres - Total 22,500 Litres 7) Inline Live Water analysis system that tracks pH, TDS, and a number of other metrics.
MFR: Amsler
Stock No.:
72627008Used Angelus 29P Rotary Double Can Seamer – Up to 200 CPM
Used- Angelus 29P Rotary Double Can Seamer, Model 29P MSLF. Capable of up to 200 cans per minute. Currently set on 301 dia. Can diameter size range: 2-1/8" to 4-1/4". Can height size range: 1-1/2" to 5-1/2". Wormscrew infeed, approximately 27-1/2" long. Approximate 3-1/4" wide conveyor. Serial# 3117741. 3/60/230 Volt.
MFR: Angelus
Stock No.:
73622001Used Apex C-500 Automatic Rotary Plastic Tube Labeler & Printer – Up to 150 Tubes/Minute with UV Curing
Used- Apex Model C-500 Automatic Rotary Plastic Tube Labeler and Printer. Capable of speeds up to 150 tubes per minute (depending on application). Tube size range: .175" - 6" or 4.45mm - 152.4mm (Diameter) x .25" - 6.00" or 6.35mm - 152.4mm (Length). Max Copy length: 3.00" or 76.2mm. Has Hoppman Bowl feeder and Fusion UV Model I6B S/N 20212. Last used in dental products.
MFR: Apex
Stock No.:
73311001Used APM MSA-26SS Semi-Automatic Shrink Bundler with Heat Tunnel
Used- APM Semi-Automatic Shrink Bundler, Model MSA-26SS. Set up for a 90-degree product infeed; 27.5" wide intermittent motion cross seal bar, with 6" long x 14" wide product hold down; 96" long x 24" wide x 37" tall stainless steel wire belt for heat tunnel; 48" long, aperture 28" wide x 13.5" tall stainless steel heat tunnel; Allen Bradley PanelView Plus 1250 touchscreen control; Ambient cooling fan after heat tunnel; Film rolls stand for top and bottom; 30" wide film feed rollers; Digital heat controls for tunnel and seal bar; Manual controls include cycle start, cycle stop, manual close, and e-stops; Light tree function indicator. Heavy duty SS tubular frame, on legs; 3/60/240V.
MFR: APM
Stock No.:
73726001Used APM MIC-26 Automatic Inline Shrink Bundler with Shrink Tunnel – Up to 30 Bundles Per Minute
Used- American Packaging Machinery (APM) Model MIC-26 Inline Shrink Bundler With Shrink Tunnel. Capable of production speeds up to 30 bundles per minute. Unit features a straight product infeed and approximately 1/2" wide x 27" long seal bar with knife cutoff. Shrink tunnel has an approximate 20" wide x 17" tall opening with wire belt conveyor. Equipped with control panel featuring Allen-Bradley L32E PLC, Allen-Bradley PanelView Plus 700 HMI, and (2) Allen-Bradley PowerFlex 4 drives. Electrical requirements are 480 volt, 3 phase, 60 Hz, 46.25 amps. Designed for automatic inline shrink bundling, the MIC-26 combines film sealing and heat shrinking into a continuous packaging operation. Serial # 652. Possible applications include shrink bundling and multipacking bottles, cans, containers, trays, food products, beverages, water, juice, dairy products, condiments, oils, and other packaged consumer or industrial products.
MFR: APM
Stock No.:
73731046Used APM ML3-18 bundler. Can do up to 100 ppm. Package size up to 12" long x 16" wide x 3" high. Sealing bar is 18" long. Flighted indexing conveyor is set at 14". Servo and PLC controlled. Safety pr...
Used-APM ML3-18 bundler. Can do up to 100 ppm. Package size up to 12" long x 16" wide x 3" high. Sealing bar is 18" long. Flighted indexing conveyor is set at 14". Servo and PLC controlled. Safety protected by plexiglass cover over operating portion of wrapper. Serial #192. Equipped with Markem 9840 inline coder. Overall dimensions are 154" long x 53" wide x 71" high. Requires 460 vac 1 phase electrical. Good condition.
MFR: APM
Stock No.:
11585128Used APV Crepaco 500-Gallon Stainless Steel Liquifier – Dual Agitation with 75 PSI Jacket
Used- APV Crepaco Stainless Steel Liquifier, Approximately 500 Gallon. Vessel has an atmospheric internal design with jacket rated 75 psi at 350 degrees F. Equipped with a 7.5 HP top mounted drive for sweep agitation, and a 25 HP bottom entering high speed agitator. Dish top, cone bottom. Approximate dimensions 60'' diameter x 36'' straight side, with an 18'' conical bottom. National Board # 9015, serial # K1050, built 1995.
MFR: APV/Crepaco
Stock No.:
73731002Used AROL Euro PK Va 8-Chuck Rotary Capper
Used AROL Euro PK Va Eight-Chuck Rotary Turret Capper. Stainless steel construction, currently set for 33 mm plastic caps, with capacity up to 15,000 bottles per hour. Requires a drive motor and 240V, 3-phase power. Two additional chuck sets and a cap sorter for conversion to 33 mm aluminum ROPP and RO caps are available separately. Built 1995. Serial #3681. Possible applications include applying compatible closures to beverage and other bottled products.
MFR: AROL
Stock No.:
70226007Used Arpac Automatic Tray Bundler – Model 107-20 for Juice Box Packaging
Used- Arpac Model 107-20 Automatic Bundler. Operates by taking a single lane of product and forming it into multipacks. Last ran juice boxes 6 pk 13.5" long x 6.5" high x 9.75" wide (individual box 3.25" W x 6.75" L x 6.5" H). Allen Bradley 5/03 PLC. Elec: 3/60/460V 40amps. Rated 38 Cycles per minute. Built 2007.
MFR: Arpac
Stock No.:
73493001Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls
Used Arpac Model BPMP-5152 Registered Film Shrink Bundler | Print/Registered Film | Tray Pack | Allen Bradley Controls. Max Film width: 26" x 12" Max bundle height. Set up for trayed products. Can run clear or print registered film. Allen Bradley PLC controls. 3/60/460V. OAD: 26'L x 68"W x 6'H.
MFR: Arpac
Stock No.:
70907005Pre-Owned Arrowhead S-Curve Conveyor – 3” Wide Plastic Belt
Used- Arrowhead S" Curve Table Top Chain Conveyor. Approximately 3" wide plastic belt. Approximately 21" long infeed into a 90 degree turn into a 9" long section into a 90 degree turn into a 21" long discharge end. Currently 45" from belt to floor. Mounted on adjustable carbon steel legs with casters. Carbon steel frame, belt side rails. Driven by a 1/2 hp, 90 volt, 1750 DC gear motor with a Penta DC motor speed controller.
MFR: Arrowhead
