Adhesive and Sealant Equipment

Smithco Air-Cooled Fin-Fan Heat Exchanger for Industrial Gas, Fluid, and Process Cooling Applications

Smithco Air-Cooled Fin-Fan Heat Exchanger for Industrial Gas, Fluid, and Process Cooling Applications. Overall dimensions are 12.5' long X 8.0' wide X 7.0' tall. Unit has (162) 1" 304 stainless steel tubes configured in 4 rows 2-Pass, 11' long. Fin Type L-tension aluminum. Rated 50 PSIG @ -20 to 350F. 10' 300# inlet and outlet. Unit has (1) 10HP COFIMCO model 2134-4-24L/B3T fan 7' diameter consisting of (4) aluminum blades with adjustable pitch and 10 degree angle. Motor is 3/60/460 volt. Fan driven by belt driven speed reducer. Rated 62,000 ACFM. Painted carbon steel structure. Built 2010, Weight 6,000#.

MFR: Smithco Engineering

Used APV Spray Dryer 3PSBD 58 – 316 Stainless Steel, 35-120 kg/h Capacity

Used- APV Spray Dryer, Model 3PSBD 58, 316 Stainless Steel. Installed unit including heating elements, filter, controls. Drying chamber size 58, approximate volume 21.73 m3. Production rate: Due to test more kinds of nozzles and different conditions, we oscillated in powder production rate form 35 to 120kg/h. Inlet temperature main drying air: 0-600 degrees C ( We often used max. inlet temp. 420 C). Maximum outlet temperature 140 degrees C. Includes Herding dust collector, cyclone and blower. Dimension 4200 x 2250 x 2300mm (LxWxH). Gross weight: 1880kg, Net weight: 1580kg. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger.

Used- Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger. Stainless steel. 3 Ft2 (0.28 m3) heating surface area. Design pressure 450 PSI (30 bar), Working pressure 225 PSI (15 bar) at 375 deg F (190 deg C). Complete with control panel and additional infrastructure. Previously used in a dairy application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used – Clark Centrifugal Compressor Model C/T 20341, Size 2M – 5089 CFM, 9 Impellers, w/ GE 1750 HP Motor

Used- Clark Centrifugal Compressor, Model C/T 20341, Size 2M. 9 Impellers. Carbon Steel. 5089CFM inlet capacity, 9100 rpm maximum continuous speed. 315 degrees F maximum operating temperature, 225psi inlet pressure and 270psi discharge pressure. 8", 12" Top Openings. Western Gear Box 1-5.1111:1 Ratio. Repaired by Dresser-Rand in 2006. Serial# 2-9-2610. Includes GE Custom 8000 Induction Motor Rated 1750hp 3/60/4000v 1786rpm, with enclosure.

MFR: Clark

Used – Steel Fab Horizontal Carbon Steel Pressure Tank – 40" x 96", 150 PSI, 2008

Used Steel Fab Horizontal Carbon Steel Pressure Tank 40" x 96", 150 PSI, 2008. Approximately 40" diameter x 96" straight side. Dished heads. Rated 150psi at -20 to 400 Degrees F. 16" diameter manway with cover, (2) 2" top connections. Head thickness .211, shell thickness .250. Part# 134-474SE. National Board# 520261, Serial# CRN.H9097.5C.

Used – Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid – 24" Fan, 30 HP Motor

Used Xchanger Inc. AA-1750 Air Cooled Heat Exchanger Skid 24" Fan, 30 HP Motor. Aluminum Plate-Fins. Serial# 1207-B10733. 24" diameter fan, 4" Inlets/Outlets. Includes Universal Silencer, Model URBY 4, driven by a 30hp 3/60/230/460v 1750rpm motor. Birkett WB400 Safety Relief Valves. Mounted on Carbon Steel Frame.

MFR: XChanger

Used – Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid – Dual Units, 24" Fan, 400 HP Motor

Used Xchanger Inc. AA-2750 Air Cooled Heat Exchanger Skid Dual Units, 24" Fan, 400 HP Motor. Aluminum Plate-Fins. 24" diameter fan, 8", 2" Inlets/Outlets. Includes Silencer rated 1.75 BAR, driven by an Approximate 400hp 3/60/460v 3575rpm motor. Birkett 4P6H411422/DS Safety Relief Valves. Mounted on Carbon Steel Frame. Includes Control Panel Skid on Carbon Steel Frame.

MFR: XChanger

Used – 304 Stainless Steel Samson Metered Pump Skid – 4 Segments, Pressure Panels, Multi-Connection

Used 304 Stainless Steel Samson Metered Pump Skid 4 Segments, Pressure Panels, Multi-Connection. Consisting of (4) metered segments. 6", 4", 2" diameter connections. 6" & 4" diameter outlets. Mounted pressure readout Panels. Approximate OAD 128" long x 86" wide x 103"T.

Complete tank farm

Used- Complete tank farm consisting of: (8) G&G International 1,800m3 Storage Vessels 26' (8000 mm) dia. x 99'1" (30500 mm) long with (4) Weir Gabbioneta Pumps. Installed horizontally on a sand bed and earth enclosed. Including piping, valves and additional infrastructure. Further details and technical documentation are available upon request. Located in Europe. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used MAN Diesel & Turbo SE DK080/250R Diesel Steam Turbine – 40,554 kW

Used MAN Diesel & Turbo SE DK080/250R Diesel Steam Turbine 40,554 kW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar, (Normal/Max 1455/1515 PSI). Inlet Temperature Normal/Max 525/535 ?; (Normal/Max 977/995 F). includes HTAC extractor, Sulter Dalian Condensate Pump, and additional infrastructure. New year 2018, installed in 2020, started up in production in October 2020. Was taken out of service in July 2022, 13993 hours in service. Overall dimensions 5900 mm x 5330 mm x 5170 mm high (192" x 173" x 168" high). Weight 100 tonnes (45454 lbs.). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MAN Diesel & Turbo SE Model DK080/250R Diesel Steam Turbine

MAN Diesel & Turbo SE Model DK080/250R Diesel Steam Turbine 40554 KW; speed 4648 rpm; Inlet pressure Normal/Max 97/101 bar, (Normal/Max 1455/1515 PSI). Inlet Temperature Normal/Max 525/535 ?; (Normal/Max 977/995 F). includes HTAC extractor, Sulter Dalian Condensate Pump, and additional infrastructure. New year 2018, installed in 2020, started up in production in October 2020. Was taken out of service in July 2022, 13993 hours in service. Overall dimensions 5900 mm x 5330 mm x 5170 mm high (192" x 173" x 168" high). Weight 100 tonnes (45454 lbs.). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

GEA / Flow Tech Complete Sugar Silo System – New 2019, Delivery in 2026

Used- GEA/Flow Tech Complete Sugar Silo System, New 2019 consisting of: (1) GEA 1685m3 (85000-liter/22486 US gallon) stainless steel storage silo, New 2019, (1) GEA Scan-Vibro Twin Sifter, type TR-T, New 2019, (1) Flow Tech 5500-liter (1455 US-gallon) Stainless steel Mixing Tanks, incl agitators, New 2019, (1)Flow Tech 2500-liter (661 US-gallon) Stainless Mixing Tank, incl. agitator, New 2019. Control system. Incl. pumps , sensors, piping, valves, platforms, stairways, and additional infrastructure. Fully enclosed in purpose-built building approximate dimensions 11 meters wide x 10 meters deep x 14 meters high. Previous used in a juice concentrate application for sugar. Initial new cost over 3 mill. Delivery in mid-2026. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: GEA Process Engineering