Adhesive and Sealant Equipment

Used USA Lab HC-5/10 Circulating Chiller & Heater – 5L, 30L/min Flow

Used- USA Lab Model HC-5/10 Circulating Chiller & Heater. Pump flow rate 30L/min. 5L Reservoir capacity. Refrigerating BTU's 4,500 to 1,000. Heating Power 1000 W. Batch# 20050258. 1/60/110 Volt, 20 Amp. Built 2020.

Buy Used SH-3 Hot Plate Stirrer – 5000ml, 1-Inch Stir Bar, Lab-Ready

Used- SH-3 Hot Plate Magnetic Stirrer 5000ml Volume with Dual Control and 1 Inch Stir Bar

Used Northland Stainless 100-Liter Inconel I-622 Reactor – 45 PSI MAWP – Agitated – Mobile on Casters

Used- Northland Stainless, Inc., 250 liter (65 Gallon), Reactor. Constructed of I-622 Alloy, Rated for a maximum allowable working pressure (MAWP) of 45 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 125 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 3296. Serial number 0215631-1. Manufactured 2003. Includes Lightnin agitator with control panel. Previously used in biotech operation

MFR: Northland

Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX

Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.

MFR: Krauss Maffei

Used Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

Used- Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor.

MFR: Insta-Pro

Unused Electromagnetic Roaster – Model TD-G650 | 650L Capacity | 0–400°C | 1 RPM | 3/50/380V | Zhengzhou Tonde

Unused- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde

Electromagnetic Roaster, Model TD-G650

Used- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde

Used Electromagnetic Roaster – TD-G650 | 650L Capacity | 0–400°C | 1 RPM | 3/50/380V | Zhengzhou Tonde

Used- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde

Used Fluid Air Model 0020P Magnaflo/Magnacoater Fluid Bed Dryer – 34L Granulating | 31L Coating | Stainless | Factrol Controls

Used- Fluid Air Magnaflo/Magnacoater Fluid Bed Dryer, Model 0020P. Stainless steel contact parts. 34 liter maximum granulating capacity. 31 liter maximum coating capacity. 46 liter bowl volume. 195 cfm inlet air. Equipped with Factrol controls. 3/60/230V.

MFR: Fluid Air

Unused Alfa Laval AS-H Belt Press G3 3-Belt for Sale

Used- Alfa Laval AS-H Belt Press G3 3Belt, 1.2 METER. Stainless steel. 8 Roller Design, 246" long, x 102" wide x 110" high. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Komline Sanderson Gravabelt Gravity Belt Thickener for Sale

Used- Komline Sanderson Gravabelt Gravity Belt Thickener, Model G25. Stainless steel construction. 36" W x 23'3" L belt size. 17-85 FPM. 16 GPM @ 85 PSI water requirements. 185 hours. Driven by a 1 HP, 1750 RPM, 3/60/230-460V motor. Previously used for wastewater treatment. OAD: 16'2 L x 5'6 W x 6' H.

MFR: Komline Sanderson

Used Thomas & Muller Stainless Steel Screw Conveyor – 24" x 26'-4", 10 HP, Built 2012

Used-Thomas & Muller Systems LTD Stainless Steel Screw Conveyor. 24" screw X 26'-4" long. Unit has a 150" long top feed area, then material travels to end 20" round side discharge, opposite side has 20" round opening for air induction. Serial# C-52302. Driven through Nord Drivesystems with 47.67:1 ratio. Powered by Marathon 10HP 3/60/208-230/460 volt motor. Built 2012.