Adhesive and Sealant Equipment
Stock No.:
54687030Used Great Western Model TB 621-7 Stainless Steel In-Line Gyroscopic Pressure Sifter With Seven Screens And 61.6 Sq. Ft. Screening Area
Used Great Western Model TB 621-7 in-line gyroscopic pressure sifter with stainless steel product-contact surfaces. Unit is equipped with (7) screens providing approximately 8.8 sq. ft. of screening area per screen and approximately 61.6 sq. ft. total screening surface area. Designed to comply with American National Standard sanitation requirements for baking equipment. Rated for processing rates up to approximately 1,200 lb/min depending on product, screen mesh and application. Product inlet and outlet are 4". Sifter frame measures approximately 90" wide post-to-post x 50" deep post-to-post x 90" high. Screen stack measures approximately 46" diameter x 43" high. Serial #4928. Possible applications include high-capacity in-line sifting, scalping and removal of oversized material from compatible flour, starch, sugar, bakery ingredients, food powders and other suitable dry bulk products.
MFR: Great Western
Stock No.:
52764001Used GEA Niro Production Minor Spray Dryer
Used- GEA Niro Production Minor Spray Dryer, Stainless Steel. Approximate 46.8" (1200 mm) diameter x 31.2" (800 mm) straight side x 31.2" (800 mm) cone bottom. Center bottom outlet. Drying capacity approximate 22 - 33 lbs (10-15 kg) an hour. Natural gas heated by a Rillo FS5D series one stage gas burner. Bottom-up nozzle atomization by a Niro pressure nozzle in fountain mode. Includes cyclone, 2.25HP/1.5 Kw motor, control panel, piping, and additional infrastructure. On 4 legs. Previously used in a ceramic application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Niro
Stock No.:
50083011Used Alfa Laval AlfaVap 500-TFR Plate Exchanger – 4,604 Sq. Ft. Heat Transfer Area
Used- Alfa Laval AlfaVap Plate Exchanger, 4,604 Square Feet, Model AlfaVap 500-TFR. (163) Sets of approximate 39" wide x 80" tall 316 stainless steel plates. Designed 44 psi at -20 to 248 degrees F. product inlet and outlets, steam inlet, condensate outlets. Mounted on a carbon steel expandable frame. Serial # 30113-93635, National Board # 32122. Built 2012.
MFR: Alfa Laval
Stock No.:
31729P.X. Engineering U Tube Heat Exchanger
Unused- PX Engineering U Tube Heat Exchanger, 4611 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (668) 5/8'' Diameter x 252'' long 304 stainless steel tubes rated 75 psi at 212 degrees F. 304 Stainless steel tube sheet and heads. (2) 10" Shell nozzles, (2) 12" nozzles in head. Saddle mounted. Year 1980.
MFR: PX Engineering
Stock No.:
10288056Used GEA Niro Spray Dryer | 47" Chamber | Atomizing Nozzle | Jacketed Slurry Tanks w/ Mixers | Stainless Cyclone Collector
Used GEA Niro Spray Dryer | 47" Chamber | Atomizing Nozzle | Jacketed Slurry Tanks w/ Mixers | Stainless Cyclone Collector. 47" inside diameter, 31" straight wall, 32" cone bottom. Electric heater, atomizng Nozzle -sprays from the bottom with two stainless steel slurry tanks and mixers with inverters. Slurry tanks are jacketed with covers, baffles inside with Speedex feed pump, variable speed.Full control panel. Stainless steel cyclone collector and collection can.
MFR: Gea-Niro
Stock No.:
10288057Used Sandvik 47.5" Wide x 43' Long Stainless Steel Belt Flaker with Rotoformer – Industrial Cooling & Pastillation System
Used- Sandvik Belt Flaker with Rotoformer for pastels 47.5" wide x 43' long overall length. Stainless steel belt with V-belt tracking under side. Knife discharge. Equipped with rotoformer for applying pastels. Cooling tray under side of belt. Exhaust hood over a portion of the belt. Control panel. Breaks down to 74.5" discharge end, (2) 16' cooling sections 54" feed end. The discharge knife will add another 6" to it. Drive: 2 hp gear reduced chain and sprocket with guard. RotoFormer drive, 2 hp gear reduced drive.3 phase, 230/460 voltage. Pastels were about 3/16" to 1/4" size.
MFR: Sandvik
Stock No.:
41023022Used Pentronix PTX 370 Spray Dryer – Stainless | Rotary Atomizer | Electric Heated | Digital Controls
Used- Pentronix PTX Model 370 Spray Dryer. Electrical heater, 47-1/2" diameter x 27-1/2" straight size x 26" cone interior, stainless steel construction, top mounted rotary atomizer with motor, thermocouple, disconnect switch with on/trip/off/reset/open, digital inlet temperature controller, temperature recorder, Ono Sokki TM-225 Speed Control for atomizer, atomizer voltage gauge, inlet blower button, exhaust blower button, atomizer on/off button, small Roller Pump for feeding liquid to dryer, Horie Industries Centrifugal Fan .2 kw/3500 rpm, 12" bottom discharge with flange for collector pan (pan not included).
MFR: Pentronix
Stock No.:
54296008Used Feldmeier 4,700 Gallon Stainless Steel Tank – Vertical Vessel with 6" Bottom Outlet
Used- Feldmeier 4,700 Gallon 304L Stainless Steel Vertical Storage Tank. Tank features a slight dished top and bottom and measures approximately 114" diameter x 102" straight side. Top openings include a 24" manway with cover, 6" vent, (2) 4" openings, and (1) 2" opening. Equipped with a 6" center bottom outlet with approximately 24" discharge height. Tank is supported by (4) stainless steel legs, providing elevated clearance for gravity discharge and connection to downstream process equipment. Possible applications and suitable products include bulk liquid storage, ingredient holding, process water, food and beverage products, dairy products, syrups, edible oils, liquid chemicals, cosmetic products, and other compatible process liquids.
MFR: Feldmeier
Stock No.:
54296009Feldmeier 4,700 Gallon Vertical 304L Stainless Steel Tank – Industrial Storage Vessel
Used- Feldmeier 4,700 Gallon 304L Stainless Steel Vertical Storage Tank. Approximately 114" diameter x 102" straight side with slightly dished top and bottom heads. Features 24" top manway with cover, 6" vent, (2) 4" top openings, and (1) 2" top opening. Equipped with 6" center bottom discharge outlet with approximately 24" discharge height. Mounted on (4) stainless steel support legs. Previously used for water storage in a reverse osmosis (RO) system. Suitable for water storage, RO water systems, liquid holding, and compatible food, beverage, chemical, and industrial liquid processing applications.
MFR: Feldmeier
