Adhesive and Sealant Equipment

Fabsco Shell & Tube Heat Exchanger, 284 Sq Ft, Duplex Stainless Tubes, Carbon Steel Shell

Used Fabsco Horizontal 284 sq. ft. Shell and Tube Heat Exchanger. Duplex 2205 stainless steel tubes rated 150 psi at 32 to 150 degrees F, 14' Tube length. Carbon steel head. Carbon Steel shell rated 265 psi at 32 to 300 degrees F. 21'' Shell diameter. National Board #11170, Serial #S21-13258-6, built 2023.

MFR: Fabsco

Used Heat Transfer Systems 2,858 Sq. Ft. U-Tube Shell & Tube Heat Exchanger

Used Heat Transfer Systems horizontal U-tube shell and tube heat exchanger with approximately 2,858 sq. ft. of heat transfer surface area and carbon steel construction. Carbon steel shell is rated for 80 psi at -20 to 250 degrees F. Equipped with (280) carbon steel 3/4" diameter x 26' long tubes rated for 100 psi at -20 to 150 degrees F, with carbon steel tube sheet and head. Shell-side openings include 4" and 14", with (2) 12" tube-side openings. Unit is mounted on carbon steel saddles. Serial #12915-2, National Board #1802. Overall dimensions approximately 30'6"L x 36"W x 60"T with a weight of approximately 17,600 lbs. Possible applications include industrial process heating, cooling and heat recovery service with suitable process fluids compatible with carbon steel construction.

MFR: Heat Inc

Xylem Shell and Tube Heat Exchanger

Unused- Xylem Shell and Tube Heat Exchanger. 26.6 square meter (286.3 square feet) effective surface area, Horizontal. Carbon-steel shell. Shell side: 171 PSI at -20 to 500 degrees F.. Tube side 221 PSI at -20 to 500 degrees F. Copper-Nickel (CuNi 90/10) tubes. NB #316316. Built 2019. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Ellett Industries Shell & Tube Heat Exchanger. Used

Used- Ellett Industries Shell & Tube Heat Exchanger, 2890 Square Foot, Vertical. Single pass. (1125) Zirconium (SB-523) 3/4" diameter x 13' 2" long tubes rated 50 psi at 400 degrees F. 304 Stainless steel shell rated 75 psi at 100 degrees F. Side lug mounted. Buddle: National board # 659. Serial # 43624. Built 2006. Shell & heads: National board # 49114. Serial # 4901035. Built 1989.

MFR: Ellet Mfg

Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023

Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.

MFR: Fabsco

Fabsco Shell and Tube Heat Exchanger, 299 Square Foot

Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.

MFR: Fabsco

Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated

Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.

MFR: Ketema

Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI

Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,

MFR: Ketema

Used Great Western Manufacturing Type TB, Model 611/4 Tru-Balance Screener

Used- Great Western Manufacturing Tru-Balance Screener, Type TB, 30" Diameter, Model 611/4 (QA30), 304 Stainless Steel. Approximate 500 pounds per minute with wheat flour. Approximate 30" diameter, (4) sieves. Approximate net sieving area 15 square feet. Driven by a 1.5 HP, 3/60/230/460 volt, 1160 rpm motor. 5" top opening, bottom openings: 5", 4". Mounted on a painted carbon steel frame. Serial# 3882. Built 1999.

MFR: BF Gump

Used Gaspar 30-Gallon Reactor – 316L SS, 150 PSI, 5 HP Chemineer Agitator

Used- Gaspar Reactor, 30 Gallon. 316L Stainless steel construction, approximately 24" diameter x 24" straight side, Elliptical removable top, elliptical dish bottom. Internal rated 150 psi and full vacuum at 400 degrees F. Jacket rated for 150 psi at 400 degree F. Top mounted 5 hp Chemineer agitator drive with mechanical seal, 230/460 volt XP motor. Center bottom outlet. Mounted on (4) painted carbon steel legs. Serial# 495032, National Board# 821.

MFR: Gaspar Inc.

Used Bowen BLSA Laboratory Spray Dryer – 316 Stainless | 15–80 lb/hr | 1000°F Inlet | Atomizer | Complete System

Used- Bowen Engineering BLSA Laboratory Spray Dryer. 316 stainless steel. 30" (770 mm) diameter x 28" (720 mm) straight side x 30" (770 mm) coned bottom. Approximate evaporation rate 15-80 pounds (6.8-26.3 kgs) an hour. Atomizer. Air requirements 100 psi (6.66 bar), Inlet temperature range to 1000 degree F (537.77 degree C), side access door. Digital control panel mounted on unit. Mounted on stainless steel legs. Includes cyclone, collection jar, gas heater and blower, piping and additional infrastructure. Previous used in a Nutraceutical application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Bowen

Macon 30" Diameter Single Deck Stainless Steel Screener

Used- Macon Screener, 30" Diameter, 304 Stainless Steel. Single deck, 2 separation. No screen. Top clamp-on cover with 8" center inlet. Driven by a approximate 1/2hp, 3/60/460 volt, 1140 rpm motor. Mounted on a painted carbon steel base.

MFR: Macon