Adhesive and Sealant Equipment
Stock No.:
10749167Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel
Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel.12' diameter x 11'8" straight side. 19'2" Overall Height. Rated 15FV psi @ 250 degrees F. Lug/Leg Supports. Dished Heads. 1/4" Thick Shell Wall. 20" top manway, bottom 4" center bottom outlet.
MFR: Crown Iron Works
Stock No.:
1105939613 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle
13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle. 316 Stainless Steel. Has counter rotating sweep mixer with scrapers and high shear mixer. Internal rated Full Vacuum. Jacket rated 40 PSI @ 300 Deg.F..Top Drive motor Disconnected for removal. Test results: The previous owner reports that all components of the homogenizer are fully functional. Fully tested with H2O. The homogenizer and inner and outer paddles work as do their RPM meters. The cover lifting hydraulics is fully functional. The cover lift mechanism is functional as well as the homogenizer and the two blades. The jacket was pressure tested and vessel was vacuum tested - no leaks. The chart recorder is out of service as well as the hour meter. The light bulb that gave me trouble in the video was replaced.Note: The outer paddles must be jogged to index, (amber light), before the cover will open. The limit switch with long arm to contact tank, must be in the correct position for lifting and for paddle operation. Last used in sanitary cosmetics facility. Video of unit running available.
MFR: J C Pardo & Sons
Stock No.:
52366001Used 50 Liter, Single Use Bioreactor, Manufactured by Thermo Scientific
Used- Thermo Scientific Single Use Bioreactor, Model HyClone, 50 liter(13.2 Gal) capacity, Stainless Steel. Open top, flat bottom shell. 14" diameter x 22" straight side. Dimple Jacket. Operating Temperature Range: Ambient to 40 +/- 0.1 Degrees C (104+/-0.2 DegreesF). 0.5psi Bag Pressure. Includes AB Series A Drive, Brother 3 phase induction motor, 1/4hp 3/60/208-230/460v 1720rpm, 10:1 Ratio. Mounted on Stainless Steel Frame. Serial# H10289-01.
MFR: Thermo Scientific
Stock No.:
11059255Used US Filter Pressure Leaf Filter – Auto Jet (1300 Sq. Ft.)
Used US Filter Pressure Leaf Filter Auto Jet (1300 Sq. Ft.). MAWP 150/FV at 400 deg.F. MDMT -20 deg.F at 150 PSI. Shell is 4'6" diameter x 15' long. Inlet (2) 3", outlet 6", spray header 3", drain 10". Material 316 Stainless Steel. No elements. Requires 48" filter elements.
MFR: US Filter
Stock No.:
53147075Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel
Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.
MFR: JV Northwest
Stock No.:
49747007Used – 50 Ton Horizontal Liquid Carbonic CO2 Tank – Bulk Cryogenic Storage
Used 50 Ton Horizontal Liquid Carbonic CO2 Tank Bulk Cryogenic Storage. SA-516-70 Shell & Heads. 78" diameter x 598" Straight Side. MAWP: 360psi at -20 to 650 degrees F. 15" diameter manway. Product: Carbon Dioxide. National Board# 4230, Serial# 59980, Built 1978.
MFR: Liquid Carbonics
Stock No.:
54687125Used New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable W...
Used-New Brunswick Scientific Co. 500L(132 gallon) capacity Stainless Steel Tank. National Board #566. Diameter is 28” with a 40” straight side with jacket on the lower 31". Vessel- Max Allowable Working Pressure 40PSIG/O PSIA. Jacket-Max Allowable Working Pressure 35 PSIG. Vessel- Max Temp. 300°F. Jacket- Max Temp. 300°F. Vessel- Hydrotest 80 PSIG. Jacket- Hydrotest 100 PSIG. The top has an 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling. The unit sits on four carbon steel legs and has an agitator bracket. Built 1982. Sits on four carbon steel legs. Overall Size is 84” x 52”.
MFR: New Brunswick Scientific
Stock No.:
54687126Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31...
Used 500 liter (132 gallon) New Brunswick Scientific Co. Chemical Reactor. 304 SS jacket and 316L SS construction. National Board # 567. Has 28" diameter, 44" straight sidewith jacket on the lower 31". Unit's vessel max allowable pressure 40 PSIG and max temperature is 300 F. Unit's Jacket max allowable pressure 35 PSIG and max temperature 300F. Hydrotest pressure is rated 80 PSIG on vessel and 100 PSIG on jacket. Top has n 18”RFSO with blind flange with a 1” agitator shaft(no motor included) , one 2- ¼” threaded sanitary fitting, one 1-¾” sightglass, one- 3/8” plug, one ¼” plug, one- ¾” plug and a Ametek MNG DIV. Pressure Gauge. The neck has one- ¾” threaded coupling, one- 1” threaded coupling, and two- ¼” couplings with plugs. The top portion has two- 2” 150lb. Pad flanges, one -1” 150lb. Pad flange, five- 1” couplings with fittings and two- 1” sanitary threaded couplings. The jacketed portion has two- 1” threaded couplings and one- ¾” threaded coupling. Below the jacket is three- 1” couplings with fittings, two- 1’ sanitary fittings, and one- ¾” sanitary fitting. The bottom has one- 1” center drain valve, one- 2” 150lb. Pad flange, one- 1” threaded coupling and one- ¾” threaded coupling.. Unit Stand on (4) 30" steel legs. Overall dimensions: 32" x33" x 82" h.
MFR: New Brunswick Scientific
Stock No.:
54686001Unused T&C Stainless 5,000 Liter 316L Sanitary Jacketed Reactor
Unused T&C Stainless 5,000 Liter 316L Stainless Steel Jacketed ASME Sanitary Reactor With Metenova ZG9 Magnetic Mixer. Vessel has a 5,000 liter working capacity and approximately 6,326.1 liter total volume, with a 72" internal diameter x 72" straight side. Constructed of 316/316L stainless steel with 3/8" shell and heads. Vessel is rated for 45 psi from -20 to 350 F and 15 psi vacuum. 316/316L stainless steel dimple heat-transfer surface is rated for 150 psi from -20 to 350 F and includes 1-1/2" inlet and outlet connections. Product-contact surfaces are mechanically polished and electropolished to 15 Ra, with approximately 35 Ra exterior finish. Vessel is insulated with 2" insulation and stainless steel sheathing. Equipped with bottom-mounted Metenova ZG9 magnetic mixer with RPM sensor and stainless steel IP66 IE3 drive, 4" ASEPCO TF40-100-2 flush-mounted pneumatic diaphragm outlet valve with USP Class VI EPDM diaphragm, (3) 3" sprayballs rated 38 GPM at 25 psi, vortex breaker, thermowell, sight/light connection, GWR, conductivity, pH and sample connections, 4" product-supply and retentate-return connections, and multiple additional sanitary process connections. Three-leg-supported vessel is constructed to ASME Section VIII, Division 1. Overall height is approximately 165-5/16" with an empty weight of approximately 5,294 lb. Drawing available. Possible applications include sanitary mixing, blending, holding and temperature-controlled processing of compatible pharmaceutical, biopharmaceutical, food, beverage, cosmetic, personal-care and sanitary chemical products.
MFR: T&C
Stock No.:
53901002Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom
Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.
MFR: ER
Stock No.:
54695001Unused Alfa Laval TK20-BWFX Plate and Frame Heat Exchanger – 1,344 Sq. Ft.
Unused Alfa Laval Model TK20-BWFX plate and frame heat exchanger, manufactured in 2024, with approximately 1,344 square feet of heat transfer surface area. Unit is rated for maximum allowable working pressures of 612/235 PSIG at 230F and a minimum design metal temperature of -20F at 612/235 PSIG. Equipped with approximately 0.8 mm plates and an A-dimension of approximately 992 mm. ASME certified and National Board registered, NB No. 65553. Serial number AAN1000484, Alfa Laval order number 18036240. Equipment is identified as a Cathode Cooler, equipment tag NG-21-HX-0001. Certified by Alfa Laval, Richmond, Virginia. Late-model industrial plate and frame heat exchanger suitable for demanding process cooling and heat-transfer applications. Possible applications include liquid-to-liquid process cooling, data center cooling water systems, industrial chilled water systems, heat recovery, cathode cooling, closed-loop process cooling, HVAC heat transfer and other compatible high-capacity industrial thermal management applications.
MFR: Alfa Laval
