Used 1000-4999 Gallon Stainless Steel Tanks

Stock# 54497001

Unused CECO Peerless 324 Gallon 316 Stainless Steel Vertical Oxygen Separator Vessel | ASME Pressure Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

Stock# 54497002

Unused CECO Peerless 316 Stainless Steel Oxygen Separator Pressure Vessel | 380 PSI ASME Vessel. 42" ID Vertical Oxygen Separator, PMC Part No. VGSP-42I-380SS-001, Drawing No. 9558B-1, is a heavy-wall vertical ASME pressure vessel designed for high-pressure oxygen service and deflagration control applications. Fabricated entirely from 316 stainless steel in accordance with ASME Section VIII Division 1, 2023 Edition, the vessel is rated for full vacuum to 380 PSIG at 194F with a MAWP of 380 PSI at 194F, a MAP of 380 PSI at 100F, and an MDMT of -4F at 380 PSI. The separator is fully ASME U-stamped and National Board registered, requires RT1 radiography, and is hydrostatically tested to 494 PSI for one hour with no PWHT required. Construction includes a 1/2" thick SA-240-316 shell, 1/2" thick 2:1 ellipsoidal heads with 0.4024" minimum formed thickness, heavy-wall Schedule 160 drain and liquid outlet nozzles, reinforced manway assembly, four support legs, lifting lugs, and a davit arm assembly. The vessel includes multiple flanged process and instrumentation connections consisting of 2" inlet, liquid inlet, and outlet nozzles, 3" liquid outlet and drain nozzles, a 2" gas purging connection, 1" DPIT, pressure indicator, vent, and relief valve nozzles, dual 3/4" level gauge connections, dual 1" level controller connections, four 1" level switch connections, and an 18" Class 300 manway. Internal surfaces are oxygen cleaned with neoprene gaskets and flange covers installed for shipment, while the exterior is cleaned, de-scaled, and finished with a sugar blast coating. Estimated vessel weights are approximately 2,412 lbs empty, 5,154 lbs operating, and 5,163 lbs hydrotest weight, with an internal capacity of approximately 324 gallons and a center of gravity located 13.12" from datum. The engineering design package includes ASME VIII Division 1 stress calculations, nozzle reinforcement analysis, hydrostatic test verification, wind and seismic analysis, structural support calculations

Stock# 10128098

Used Vendome 1,000 Gallon Stainless Steel Jacketed Processor | Scrape Agitator | Dual-Zone Heat | 100 PSI. It has a dished bottom and a domed top. The jacket is rated for 100 psi @ 338F and the shell is rated for atmospheric pressure. National board # 898. Vendome serial number 2004-01Z-1. Vessel is 72" OD x 63" straight side. Jacket has two heating zones with 2" inlet and outlet on each zone. Bottom has 3" bent tri- clamp nozzle. Top nozzles are: 18" hinged manway, 6" wide x 18" long nozzle, 14" flanged nozzle, three 3" tri clamp, six 2" tri clamp and one 1" tri clamp. Tank has a spray ball inside. The side scraping agitator is driven by a 5 hp gear reduced drive. 230/460 vac 3 ph electric power required. Tank stands on four legs. Some cosmetic denting to the insulation skin otherwise it appears to be in good shape.

Stock# 11059385

Used Cherry-Burrell 1,000-Gallon Sanitary Jacketed Stainless Steel Mix Tank | Food-Grade Heated Vessel. Approximately 72" diameter x 72" straight side. Dished top, pitched sloped bottom. Jacket Rated 100 PSI @ 300 Degrees F. Top mounted agitator driven by a 1.6/3 HP, 860/1740 rpm 460 volt motor into gearbox with 42.93 ratio for 20/40 RPM output speed. 3" Side bottom outlet. Approximately 9'6" OAH. National Board Rated. Last used in sanitary food plant.

Stock# 53267018

Used Circleville Metal Works Inc. approximately 1050 gallon 304 stainless steel vertical tank. 66" diameter X 72" high straight side. Internal rated ATMOS @ 200 F. S/N CMW-936. Dished top and bottom. Top fittings: 20" manway, (1) 1.5", (1) 4", and (1) 10". (1) 1.5" side middle inlet and (1) 1" and (1) 1.5" side bottom outlets. 2" center bottom drain. Mounted on (4) legs giving 22" clearance. Built 1975.

Stock# 10128101

Used 1188.77 gal (4500 L) Beer Barrel tank, built by ABC- Kinglai Co, Ltd for Glacier Tanks LLC. Built 05/2016. This stainless steel tank is about 59" in diameter with a 81" straight side and 12" dished heads. Volume 4.5 m3. Design pressure shell 0.1 MPa, jacket 0.15 Mpa. Design temperature 98 degrees C. jacket on the side of tank only. Dished heads. Two top lift lugs. Tank has four legs. Top has one 3" tri clamp nozzle and one 1.25" tri clamp nozzle. Bottom nozzles one 1.25" tri clamp and one 1.5" tri clamp. Side nozzles one 16" x 13" elliptical hinged lid manway, five 1.25" tri clamp nozzles for jackets, two 1.25" tri clamp, two .75" tri clamp nozzles, and one .75" coupling. Serial# AKL16-A-10005. Overall dimensions70" x 70" x 122" tall.

Stock# 52555001

Used Criveller Ganimede Wine Fermentation Tank, 5.5 Ton Capacity, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway. (5) 2" side openings, 3" Center bottom outlet with valve, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-1. Reported new never installed. Approx. overall height is 15'2". ***The tank is made entirely of stainless steel, and the outer shell has been painted***

Stock# 52555002

Used Criveller Ganimede 5.5 Ton Capacity Wine Fermentation Tank, 1,200 Gallon, 304 Stainless Steel, Vertical. Approximate 68" diameter x 106" straight side. Coned top and coned bottom. Internal funneled diaphragm cone, (2) 2" side bypass stations. Approximate 40" wide section top dimple jacket. Openings top: 15.75" manway, side: 17" x 12" manway, (5) 2" side outlets, 3" Center bottom outlet, approximate 14" discharge height. Mounted on (4) stainless steel legs. Serial# 791-2. Reported new never installed. Approx. overall height is 15'2". ***The tank is made entirely of stainless steel, and the outer shell has been painted***

Stock# 54296016

Used Feldmeier Stainless Steel Tank, Approximate 1,200 Gallon Capacity, Vertical. Approximately 58" diameter x 96" straight side. Dished top, coned bottom. Openings top: 18" manway with cover, 4", 3", (3) 2", Side: (2) 2". Bottom: 3", 1", 4" Center bottom outlet with approximately 25" discharge height. Mounted on (4) stainless steel legs. Serial# E-572-04.

Stock# 54293003

Used 1,250 Gallon 304 Stainless Steel Vertical Mix Tank. Approximate 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with a Chemineer 2-tier 3-turbine agitator. Driven by a 1hp, 3/60/230/460 volt, 1160rpm gear motor. Openings Top: (2) 12" manways, 1-1/2". Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

Stock# 54293004

Used Agitated Stainless Steel 1,250 Gallon Mix Tank, Vertical. Approximately 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with a Chemineer 2-tier 3-turbine agitator. Driven by a 1hp, 3/60/230/460 volt, 1160rpm gear motor. Openings Top: (2) 12" manways, 1-1/2". Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

Stock# 54293005

Used 304 Stainless Steel 1,250 Gallon Chemineer Agitated Tank, Vertical. Approximately 98" diameter x 42" straight side. Flat top, slight dish bottom. Top agitator bridge with Chemineer dual 3 turbine agitator. Driven by a 1.5hp, 3/60/230/460 volt, 1175rpm gear motor. Openings Top: (2) 12" manways. Approximately 3" center bottom outlet. (4) internal mounted baffles. Mounted on (4) Stainless Steel Legs. No Manufacturers Tag.

Stock# 53147075

Used JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

Stock# 10128097

Used Vendome 1,400 Gallon Stainless Steel Processor | Dual Agitation | Jacketed | 100 PSI | . The bottom and the sides are jacketed. The dimple jackets are rated at 100 psi @ 338F. This unit is equipped with side scrape agitation (5 hp) and a 50 hp top entering homogenizing mixer. 230/460 vac 3 ph electric power required. There is one adjustable baffle inside. The vessel is 84" diameter x 60" straight side with a dished top and bottom. Bottom jacket nozzles are two- 2" RFSO flanges. Side jacket has four-2" RFSO flanges as in/out flanges. Bottom has one 3" tri-clamp nozzle. Top has one- 18" hinged lid manway, one 6" x 18" rectangular inlet, one 6" tri-clamp nozzle, one- 4" sightglass, three-3" nozzles, five- 2" nozzles, and one 1" nozzle. This unit stands on 4 stainless steel pipe legs. National board #299, Serial# 2004-05Z-1. The skin over the jacket has some dents and repairs. The jackets passed our hydro tests.

Stock# 13140151

Used Cherry Burrell Approximately 1500 Gallon 304 Stainless Steel Jacketed Processor. Vertical, Dished top Sloping bottom. 80" diameter X 80" high straight side. Model EPD. Equipped with multi-zone panel coil jacket on sides and bottom head. Jacket is insulated and covered with stainless steel sheathing. Top Openings: 20" manway, (3) 1 1/2", (1) 2", and (1) 3/4". 3" side bottom drain with valve. Has spray-balls and baffle. Equipped with wide bottom and side sweep agitator, driven thru a Hub City, model 4510 geardrive with a 150:1 ratio, powered by a 5HP 3/60/230-460 volt motor. Has (2) thermowells. Mounted on stainless steel legs and equipped with stainless steel ladder. Previously used in Milk Production.

Stock# 53147092

Used 1,500 Gallon Cherry-Burrell Vertical Stainless Steel Tank Side Manway, Spray Bar, Polished Interior. Tank measures 5'4" diameter x 7' straight side with dished top and bottom heads. Features a 3" diameter center top opening reduced to 1.5", one additional 3" side top nozzle, and a 3" center bottom outlet with a secondary 2" side bottom nozzle. Includes a 20" x 16" oval side manway with an inward-swinging cover secured by a swing latch. Interior finish is polished stainless steel with clean seams and integral support welds. The tank is mounted on four stainless steel legs with adjustable footpads and includes a welded agitator mount (no agitation installed). External piping includes a mounted spray bar along one side.

Stock# 53147093

Used 1,500 Gallon Cherry-Burrell Vertical Stainless Steel Tank Side Manway, Spray Ball, Lifting Lugs. Measures 5'4" diameter x 7' straight side with dished top and bottom heads. Constructed from polished stainless steel, the tank features a 3" diameter center top opening tapered to 1.5", one additional 3" side top nozzle, a 3" center bottom outlet, and a 2" side bottom outlet. Includes a 20" x 16" oval side manway with inward-swinging cover secured by a swing latch. Mounted on four stainless steel legs with adjustable footpads, and fitted with a welded agitator mount (no agitator included), internal spray ball line, top nozzles, and lifting lugs.

Stock# 53264023

Used Fulton Engineered Specialties 1500 Gallon Jacketed Tank, 304 Stainless Steel, With 20 HP Mixer. High pressure jacket rated : 150 psi @ 428 deg.f. Interior dimensions: 44'' diameter x 96'' straight side, dish bottom. Center discharge: 6'' flanged. Falk heavy duty top entry mixer, motor: 20 hp, 230/460 volt, 1740 rpm. Final output rpm: 190 approximately. Serial# 2811, National board# 1022, built 2013. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Stock# 53749003

Used Bendel Storage Tank, 1,500 Gallon Capacity, 304 Stainless Steel, Vertical. Slight Dish top, Flat bottom. 68" diameter x 94" straight side. Openings Top: 6", 2", 1", 18" side manway, no cover, 1" side bottom outlet with 8" discharge height. Serial# 533333. UL Listed Aboveground tank for flammable liquids.

Stock# 53458009

Used Bavarian Brewery Technologies Brew Tank, Model K30, 42.2 Gross Volume BBL Capacity, Approximately 1540 gallon capacity, 304 Stainless Steel, Vertical. Approximately 72" diameter x 80" straight side. Dished top, flat bottom. Sidewall jacketed with 15psi max steam jacket. Openings Top: 16" manway with cover, 10", 1-1/2", Side: 5" with sight glass, 2" with sight glass, 1-1/2", 2" side bottom outlet with 6" discharge height. leg mounted. Serial# 0220.

Stock# 54415001

Used Glacier Tanks Stainless Steel Brew Tank / Fermenter, 40 BBL. Total volume 1550 gallon, minimum working volume 1,240 Gallons. 304 Stainless steel. Dished top, Cone bottom. Dimple Sidewall and bottom cone jacket, rated approximately 14.7 psi. Center bottom outlet. Side manway. OAD: 172" overall height x 68" diameter x 84" wide (ground to manway). Mounted on (4) legs. On rolling cart. Serial# GT-V-3215.

Stock# 53458008

Used Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.

Stock# 14114042

Used 1850 Gallon Waukesha Cherry Burrell 316 Stainless Steel Tank. Interior Dimensions: 80" x 74" straight side. Center discharge: 4" tri-clamp. Side ports: 2" and 1/5". Top manway lid. Distance from discharge to floor is 42". (4) adjustable stainless steel legs with pads. Serial# H-486-95. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Stock# 10128086

Used 1,900 Gallon JV Northwest Stainless Steel Jacketed Tank with 3 HP Agitator 45 PSI, UM Stamped, Serial # 13847, Built 1997. Jacket in two sections is rated for 45 PSI @ 400 degree F. Tank is 78" diameter x 84" straight side. Bottom and 1/3 of the straight side jacketed. Tank has bottom mounted 3 hp agitator, 230/460 vac 3 ph power required. Top has 20" round manway with hinged lid, 10" vent pipe, one 6" tri clamp, two 3" tri clamp, and one 2" tri clamp. Jackets have two threaded connections each. Bottom has 4" 90 degree tri clamp elbow for the discharge. Side has .75" coupling with probe. Unit has four carbon steel legs.

Stock# 10128084

Used 2,000 Gallon SS Vertical Jacketed Tank Cone Bottom, Dished Top, Manway, Modern Brewing. Tank is 72" ID x 99.5" straight side. Side has 20" x 16" eliptical manway, one 3/4" tri clamp nozzle, two 3/4" copper pipes to the jacket. Dished top has one 2" tri clamp nozzle and one 3/4" tri clamp nozzle to a spray ball. Cone has two 1-1/2" tri clamp nozzle. Cone is 35" length. Top has four lift lugs. Manufactured by Modern Brewing & Design Inc.

Stock# 10128085

Used 2,000 Gallon Santa Rosa Stainless Steel Jacketed Vertical Tank 20 PSI MAWP, Three-Zone. Overall height is 240" tall on four legs. Main shell is 66" OD x 125" straight side. Long bottom cone has two 1" threaded jacket fittings and one 2" tri clamp bottom fitting. Side has four 1" threaded fittings for the jacket, one 3" tri clamp, one 2" tri clamp, one 16" x 20" elliptical manway and two 1" threaded couplings for probes. Top has 3- 2" tri clamp fittings. Cone length 53" long.

Stock# 11059329

Used 2000 Gallon Hastelloy C-276 mix tank. Dish top and bottom. Built By Addison Fab. 6' dia. x 9' T/T. Lightnin 3/4 HP mixer, 208-220/440 volt. Lug mounted. Rated 10" WC @ 250 Deg.F. Alloy

Stock# 10151489

Used Alloy Fabricators Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank. 90" diameter x 64" straight side; Dished top and bottom; Internal rated 15 psi at 120 degrees F; 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" daimeter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 1-128A; Built 1991.

Stock# 10151490

Used Approximately 2,200 Gallon 316L Stainless Steel Jacketed Mix TankManufacturer: Alloy FabricatorsCapacity: 2,200 gallonsSerial: 1-130AYear: 1991Internal pressure: 15 psi @ 120FJacket pressure: 85 psi @ 120FDimensions: 84" dia. x 72" straight sideMaterial of construction: 316L stainless steelHalf-pipe jacket material: 304 stainless steelAgitator: 10 hp, 0 - 80 rpm, Axial type, 316 SS; Dual hub with 2 blades each; 35 1/2" dia.; Pro Quip model 10ZGS15BDished top, dished bottom

Stock# 10151491

Used 2,200 Gallon 316L Stainless Steel Jacketed Mix Tank, Manufactured by Alloy Fabricators. 84" diameter x 76" straight side; Dished top and bottom. Internal rated 15 psi at 120 degrees F, 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" diameter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 1-131A, Built 1991.

Stock# 10151492

Used Industrial 2,200 Gallon 316L Stainless Steel Mixing Tank Half-Pipe Jacket & Axial Agitator. Made by Alloy Fabricators. 84" diameter x 76" straight side; Dished top and bottom; Internal rated 15 psi at 120 degrees F; 304 stainless steel half-pipe jacket rated 85 psi at 120 degrees F; 15 hp axial type agitator, 316 stainless steel, three hub with 2 blades each, 39 1/2" diameter, upper - 2 left hand; mid - 2 left hand; bottom - 2 right hand. Serial # 00-172A. Built 2000.

Stock# 11252199

Used 2,400 Gallon Storage Tank, Stainless Steel Single Wall, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Stock# 11252200

Used 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Stock# 49479009

Used DCI 2,500 Pressure Wall Processor, Gallon Dome Top, Cone Bottom, 316l Interior. Offset Vertical Agitator. Double Sprayball. 2" Outlet. 23 Sq. Ft. Jacketed On Lower Sidewall Only. Approximately 88" Diameter X 183" High. Top Manway. Stainless Steel Legs with Adjustable Feet.

Stock# 11059386

Used Walker Vertical Jacketed Mix Tank 2,500 Gallon Stainless Steel. 15' overall height. Top entering 10 HP right angle center turbine agitation, with stainless steel shaft and dual pitched turbines. Stainless steel side wall baffles and thermowell. 3" Outlet. Last used in sanitary cosmetics facility.

Stock# 53267072

Used Culligan Stainless Steel Media Tank, Approx. 2,500 gallon capacity. 95" diameter X 84" high straight side; Tank certified by Silvan Industries; Certified 125 PSI @ -20 to 250 degrees F. 0.437 head thickness, 0.375 shell thickness; Has 6" inlet and outlets; Has all stainless steel face pipe equipped with Bray Controls pneumatic valves; Has 3" side top relief valve and 4" blinded side bottom outlet; Equipped with stainless steel diffusers. Mounted on (4) legs. NB/SN 828846. Built 2017.

Stock# 53267101

Used ExceleTech Inc. 304 Stainless Steel Vertical Pressure Tank, Approx. 2500 Gallons. 6' diameter X 12' straight side. Internal rated 430 PSI @ 450 F. Welded hemispherical heads. 1.250" shell thickness, bottom head 1", Top head 1.375". Top fittings: 18" manway, (1) 1", (1) 2", (1) 3", and (1) 6" agitator nozzle. 20" center bottom outlet. (12) 2" side injection ports. Mounted on (4) carbon steel legs. Insulated and wrapped with sheathing. NB# 121, S/N 6377-01. Built 2001.

Stock# 53264043

Used 2500 Gallon Superior Steel Jacketed Mixing Tank Dual Turbine Agitation. Internal Rated ATMOS at -20 to 170 degrees F, Jacket pressure rating of 150 psi at -20 to 170F. Top-entry dual 3 blade turbine mixer driven by a 5 hp motor operating at 230/460 volts and approximately 40 rpm. The interior dimensions measure 78 inches in diameter with a 123-inch straight side. The top includes multiple ports, consisting of one 4-inch port, four 3-inch ports, six 2-inch ports, and one 1.5-inch port, along with a 2-inch center discharge. It also has a 20-inch top manway with a glass lid and is fitted with lifting lugs for handling. The unit was previously used for protein processing. Year 2017

Stock# 54296007

Used Feldmeier 2,500 Gallon Stainless Steel Storage Tank, Vertical. Approximate 82" diameter x 100" straight side. Dished top, cone bottom. Openings Top: 18" manway with cover, 4", 3", (2) 2", 4" side bottom outlet, 3" & 1-1/4" bottom outlets. 4" Center bottom outlet with 22" discharge height. Mounted on (4) stainless steel legs. Serial# E-571-04.

Stock# 52878001

Unused - Shandong HG Machinery 10,000 Liter Fermentation Tank, 2641 Gallon (85 BBL), 304 Stainless Steel, Vertical. Approximately 78.74" diameter x 137.79" straight side. Dished top, 60 degree cone bottom. Jacket approximately 14m2, test pressure 0.2MPa (29 PSI). Openings top: 102mm (4"), 89mm (3.5"), 51mm (2"), Side: 540mm x 440mm Manhole (21.25" x 17.3"), 38mm (1.5"), 19mm (.75"). 1-1/2" Side cone outlet, 818mm (32.2") discharge height. 1-1/2" Center bottom outlet, approximate 60mm (2.36") discharge height. Mounted on (4) legs. Approximate 87" x 87" x 236" tall, 3400 lb

Stock# 40425034

Used DCI Twin Motion Kettle, 3,000 Gallon, 316 Stainless Steel. Approximately 84" diameter x 120" straight side, dish top, cone bottom, jacketed on side and bottom cone rated 150 PSI at 200 Degrees F. Twin motion agitation with anchor agitator with bottom and sidewall scrappers, with 20 hp, 230/460 volt Nord motor drive, off set (4) tier four blade pitched turbine blade agitator with 25 hp, 230/460 volt Nord motor drive, 24" top manway, 3" bottom outlet, on 4 legs with approximately 42" discharge height, approximately 252" overall height, serial# JS3724B , national board# 6749, built 2007.

Stock# 11059330

Used 3000 Gallon Jacketed Stainless Steel Dish Bottom Mix Tank. 8' Dia. X 7' T/T. Half Pipe Stainless Steel Jacket. 2 HP, 230/460 volt Lightnin Series 10 Mixer. 3" Center bottom outlet with valve. Has slight cone top. Mounted on legs. Last used in Health/Nutritional/Biomedical Collagen products.

Stock# 54330002

Used Cherry Burrell Vertical Mixing Tank | 3,000 Gallon 304 Stainless Steel Beverage Vessel. 7' 9'' D x 12' OAH. Dome top, dish bottom. Side manhole. 3" Tri Clamp center discharge outlet. Side mounted agitator Driven by a 1hp 3/60/230/460v 850rpm motor. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Previously used in a beverage application.

Stock# 54296017

Used Stainless Steel Vertical Storage Tank, Approximate 3,200 Gallon Capacity. Approximately 88" diameter x 120" straight side. Dished top, and bottom. Openings Top: (2) 4", (4) 2". 2" Side bottom outlet, 3" bottom & 4" Center Bottom Outlet with approximate 32" discharge height. Side bottom manway with cover. Mounted on (4) stainless steel legs. No mfg tag.

Stock# 53264044

Used 3,400 Gallon Stainless Steel Tank Sanitary Process Vessel with CIP & Tri-Clamp Connections. Interior dimensions of 93 inches in diameter and a 117-inch straight side, plus a cone top. Sloped bottom leading to a 2-inch tri-clamp discharge equipped with a ball valve. Top includes multiple inlets: a 2-inch inlet with a ball CIP, a 2.5-inch tri-clamp inlet, and a non-threaded 1.5-inch inlet. Additional connections include top side ports with 3/4-inch male NPT and 3/4-inch female NPT fittings, as well as bottom side ports with 3/4-inch male NPT, 3/4-inch female NPT, and a 2-inch tri-clamp. The tank is also equipped with a top vent. Last used in a Cosmetics Application.

Stock# 53790001

Used 3,400 Gallon (14000 Liter) Tank, 304 Stainless Steel, Vertical. Approximately 86" diameter x 131" straight side.14-gauge side wall and 12 gauge top and bottom. Openings Top: 18" manway, with 2" Side port, 2" Bottom center discharge. Mounted on 6 legs. No manufacturers tag.

Stock# 50202060

Used Meridian 3400 Gallon Stainless Steel Storage Tank. 6' diameter x 20' tall. Vertical, Top manhole. Cone bottom. Center bottom outlet. On (4) stainless steel legs.

Stock# 52933001

Used Crepaco Tank, 3500 Gallons, 304 Stainless Steel, Vertical. Approximate 96" Diameter x 118" Straight Side. Dish top (dented), coned bottom. Fixed stainless steel agitator bridge, (1) baffle, (1) spray ball. Openings top (2) 1-1/2", 2-1/2", 4" for drive, 12" manway with cover. Side openings (1) 20" x 16" oval manway with cover, 2" center bottom outlet. Mounted on (6) stainless steel legs. Serial#C6934.

Stock# 54330001

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel. 7'9" D x 12' OAH. Dome top, sloped bottom. Side manhole. Side discharge outlet. Side-mounted agitator. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Previously used in a beverage application.

Stock# 50800019

Used Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank. 316L stainless steel. Cone bottom. Tank height is 19'6". Sidewall is dented. Ladder is with the tank, no safety cage.

Stock# 54154001

Used Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.

Stock# 54211001

Unused 4,000-Gallon Stainless Steel Storage Tank | Type 304 SS | Dished Top & Bottom | 108" Dia x 108" H | Atmospheric | Manway & Flanged Fittings. Non jacketed, insulation, or heat-transfer surface, making it suitable for ambient storage applications. The tank is supported by four Type 304 stainless steel legs with square footpads and includes two 304 stainless steel lifting lugs for handling. Fittings include, on the top head: (1) 12", (2) 4", and (1) 3" 150# RFSO flanges, along with a 24" cross-arm manway with an EPDM gasket, All 316 stainless steel. The bottom head features (1) 3" 150# RFSO flange. Both the interior and exterior surfaces have a mill finish with cleaned, as-welded joints, providing a durable and sanitary surface suitable for general storage use. NOTE: Description for this tank is approximate. Customer will opportunity to modify nozzle configuration. Please contact your Aaron Professional.

Stock# 54211002

Unused 4,000-Gallon 316 Stainless Steel Storage Tank | 108" Dia x 108" H | Atmospheric Service | Dished Top & Bottom | 150# Flanged Fittings | Mill Finish. Non jacketed, insulation, or heat-transfer surface, making it suitable for ambient storage applications. The tank is supported by four Type 304 stainless steel legs with square footpads and includes two 316 stainless steel lifting lugs for handling. Fittings include, on the top head: (1) 12", (2) 4", and (1) 3" 150# RFSO flanges, along with a 24" cross-arm manway with an EPDM gasket, All 316 stainless steel. The bottom head features (1) 3" 150# RFSO flange. Both the interior and exterior surfaces have a mill finish with cleaned, as-welded joints, providing a durable and sanitary surface suitable for general storage use.

Stock# 53267067

Used 304 Stainless Steel Tank, 4000 gallon capacity. 8 diameter X 12 high straight side. Flat top and bottom. 4" side top inlet. (1) 2" and (1) 3" side bottom outlets. 24" side bottom manway. (1) 2" and (1) 3" top fittings.

Stock# 54471001

Used Ripley Stainless 4,000 Gallon Fermenter Tank. 304 stainless steel. 6.5' diameter x approx. 19' height. 15 PSI working pressure. Cone bottom. On (4) legs. Serial# 186. Built 1995. Previously used in brewery application.

Stock# 13140146

Used CMW Inc Approximately 4000 Gallon Stainless Steel Vertical Storage Tank. 96" diameter X 128" high straight side. Flat top and flat bottom with ibeam reinforcements. Top Openings: 6" diameter inspection port with lid, (3) 2" side top inlets, Openings Side: 24" side bottom manway, (4) 2" and (1) 3" side bottom outlets. Mounted on (4) 10" X 8" galvanized i-beam legs.

Stock# 10151628

Used Mueller 4,150 gallon Stainless Steel Jacketed Tank.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-1. Previous use was for brewery fermentation.

Stock# 10151629

Mueller 4,150 Gallon Stainless Steel Fermentation Tank Jacketed Vessel.97 7/16" OD x 219". Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom. Serial # 164585-2.Previous use was for brewery fermentation.

Stock# 10151630

Used Mueller 4,150 Gallon Brewery Fermenter Stainless Steel Tank. 97 7/16" OD x 219".Internal rated 15 psi at 100 degrees F.304 stainless steel, vertical, dished head, cone bottom.Serial # 164585-3.Previous use was for brewery fermentation.

Stock# 52354001

Used Feldmeier Stainless Steel Storage Tank, Approximately 4,200 Gallons. Approximately 240" High (straight side) X 72" diameter. Last used in Olive Oil operation.

Stock# 52354002

Used Feldmeier Stainless Steel Approximately 4,200 Gallon Storage Tank, Vertical. Approximately 240" High (straight side) X 72" diameter. Side manway. Last used in Olive Oil operation.

Stock# 53147085

Used 4,250 Gallon Stainless Steel Vertical Storage Tank. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage. UL rated vessel.

Stock# 53147086

Used 4,250 Gallon Vertical Stainless Steel Tank UL Rated for Solvents. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147087

Stainless Steel 4,250 Gallon Storage Tank Valley Foundry, UL Certified. 8' diameter x 12' straight side. Slight dished top and bottom. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 53147088

UL Rated Stainless Vertical Tank 4,250 Gallon Solvent-Grade Vessel. 8'-0" diameter x 12'-0" height. Fabricated by Valley Foundry & Machine Works. Previously used for solvent storage.

Stock# 54484001

Used Trinity Industries 4,500 Gallon Stainless Steel Holding Tank | Admix Rotosolver High Shear Mixing System. ADMIX Agitation System, CIP spray balls. 9 diameter x 11 long. Total height is 11 4". Admix Rotosolver high-shear mixer, model 180RS159SS. Based on Admix model numbering and published Rotosolver specs, this is a sanitary stainless high-shear disperser/emulsifier. Here are the likely specs for your unit: Spec Value Manufacturer Admix Series Rotosolver Model 180RS159SS Type In-tank sanitary high-shear mixer Construction Stainless steel (SS") Mixing head dia. ~6.25 in Standard motor size 20 HP Standard speed 1800 RPM Typical batch capacity Up to ~600 gal Max shaft length ~72 in Approx. weight ~500 lb Typical applications Powder wet-out, emulsifying, dispersion, gum hydration, food/pharma/cosmetics. Early 2000s vintage.

Stock# 54484002

Used 4,500 Gallon Stainless Steel Mixing Tank | Trinity Horizontal Vessel w/ Admix Rotosolver. Stainless steel, Horizontal. ADMIX Agitation System, CIP spray balls. 9 diameter x 11 long. Total height is 11 4". Admix Rotosolver high-shear mixer, model 180RS159SS. Based on Admix model numbering and published Rotosolver specs, this is a sanitary stainless high-shear disperser/emulsifier. Here are the likely specs for your unit: Spec Value Manufacturer Admix Series Rotosolver Model 180RS159SS Type In-tank sanitary high-shear mixer Construction Stainless steel (SS") Mixing head dia. ~6.25 in Standard motor size 20 HP Standard speed 1800 RPM Typical batch capacity Up to ~600 gal Max shaft length ~72 in Approx. weight ~500 lb Typical applications Powder wet-out, emulsifying, dispersion, gum hydration, food/pharma/cosmetics. Early 2000s vintage.

Stock# 54330003

Used Cherry Burrell Vertical Mixing Tank | 4,500 Gallon 304 Stainless Steel Beverage Vessel. 9' 6'' D x 12' OAH. Dome top, dish bottom. Side manhole. Center bottom outlet. Side mounted agitator Driven by a 5hp 3/60/230/460v 1750rpm motor. Has sight glass. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Serial# 4500-83-2595. Previously used in a beverage application.

Stock# 54296008

Used Feldmeier 4,700 Gallon Stainless Steel Tank, Vertical. Approximately 112" diameter x 102" straight Side. Slight dished top and bottom. Openings Top: 24" manway with cover, (3) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs.

Stock# 54296009

Used Feldmeier Stainless Steel 4,700 Gallon Vertical Storage Tank. Approximately 112" diameter x 102" straight Side. Slight dished top and bottom. Openings Top: 24" manway with cover, (3) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs.

Stock# 54296003

Used Feldmeier Stainless Steel Tank, Approximate 4,700 Gallon Capacity. Vertical, slight dished top and bottom. Approximately 112" diameter x 102" straight Side. Openings Top: 24" manway with cover, 6" vent, (2) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs. Serial# 19E0882.

Stock# 51142001

Used Scholz GMBH Tank, 4,910 Gallon / 18,600 Liter capacity, 316 Stainless Steel, Horizontal. Approximate 66" diameter x 312" straight side, dished ends. DP: rated -1 bar (-14.5 psi) @ DT: 50 degrees C (122 degrees F). IP: rated 0.5 bar (7.25 psi). Openings top: 2", 3", side: 20" manway with cover, 3". Side bottom: 1-1/2", 8" center bottom outlet. Mounted on (6) legs. Serial # 42852/2. Built 2001.