Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used American Process Systems Double Spiral Ribbon Blender, 20 Cubic Feet Capacity. Stainless steel construction. Approximate non-jacketed trough 60" x 24" x 27" deep. 2-1/2" diameter center shaft with approximate 24" diameter outer ribbon area, 1-1/4" wide x 1/2" thick blades. Approximately 14" diameter inner ribbon 2" wide x 3/16" thick. Driven by 5hp, 3/60/230/460 volt, 1680 rpm gear motor, 12.5:1 ratio. Clamp-on top cover. 6" Center bottom outlet, no cover, with 41-1/2" discharge height. (3) Side injection ports. Start / Stop panel. Mounted on (4) painted carbon steel legs with casters. 3/60/480 Volt.
Model | DRB-20 |
Category | MixersMixers |
Subcategory | Ribbon BlendersRibbon Blenders |
This used American Process Systems double spiral ribbon blender offers a 20 cubic foot capacity and is built for efficient and thorough blending of powders, granules, and other dry bulk materials. The stainless steel construction ensures sanitary operation and resistance to corrosion, ideal for food, chemical, and pharmaceutical applications. The non-jacketed trough measures approx. 60" x 24" x 27" deep, housing a 2-1/2" diameter center shaft with a 24" diameter outer ribbon (1-1/4" wide x 1/2" thick blades) and 14" inner ribbon (2" wide x 3/16" thick). It's powered by a 5 HP, 1680 RPM gear motor with a 12.5:1 reduction ratio. The blender features a 6" center bottom outlet (no cover), clamp-on top cover, three side injection ports, and Start/Stop control panel, mounted on painted carbon steel legs with casters for easy mobility.
Capacity: 20 Cubic Feet
Construction: Stainless Steel (Product Contact Areas)
Trough Dimensions: Approx. 60" L x 24" W x 27" D
Center Shaft: 2-1/2" diameter
Outer Ribbon: Approx. 24" diameter; 1-1/4" W x 1/2" T
Inner Ribbon: Approx. 14" diameter; 2" W x 3/16" T
Motor: 5 HP, 1680 RPM, 3/60/230/460V (marked 3/60/480V), gearmotor with 12.5:1 reducer
Top Cover: Clamp-on (no lid over discharge)
Outlet: 6" center bottom discharge; 41.5" discharge height
Ports: (3) side injection ports
Controls: Start/Stop control panel
Frame: Painted carbon steel legs with casters
Used American Process Systems Double Spiral Ribbon Blender, 20 Cubic Feet Capacity. Stainless steel construction. Approximate non-jacketed trough 60" x 24" x 27" deep. 2-1/2" diameter center shaft with approximate 24" diameter outer ribbon area, 1-1/4" wide x 1/2" thick blades. Approximately 14" diameter inner ribbon 2" wide x 3/16" thick. Driven by 5hp, 3/60/230/460 volt, 1680 rpm gear motor, 12.5:1 ratio. Clamp-on top cover. 6" Center bottom outlet, no cover, with 41-1/2" discharge height. (3) Side injection ports. Start / Stop panel. Mounted on (4) painted carbon steel legs with casters. 3/60/480 Volt.
This used American Process Systems double spiral ribbon blender offers a 20 cubic foot capacity and is built for efficient and thorough blending of powders, granules, and other dry bulk materials. The stainless steel construction ensures sanitary operation and resistance to corrosion, ideal for food, chemical, and pharmaceutical applications. The non-jacketed trough measures approx. 60" x 24" x 27" deep, housing a 2-1/2" diameter center shaft with a 24" diameter outer ribbon (1-1/4" wide x 1/2" thick blades) and 14" inner ribbon (2" wide x 3/16" thick). It's powered by a 5 HP, 1680 RPM gear motor with a 12.5:1 reduction ratio. The blender features a 6" center bottom outlet (no cover), clamp-on top cover, three side injection ports, and Start/Stop control panel, mounted on painted carbon steel legs with casters for easy mobility.
Capacity: 20 Cubic Feet
Construction: Stainless Steel (Product Contact Areas)
Trough Dimensions: Approx. 60" L x 24" W x 27" D
Center Shaft: 2-1/2" diameter
Outer Ribbon: Approx. 24" diameter; 1-1/4" W x 1/2" T
Inner Ribbon: Approx. 14" diameter; 2" W x 3/16" T
Motor: 5 HP, 1680 RPM, 3/60/230/460V (marked 3/60/480V), gearmotor with 12.5:1 reducer
Top Cover: Clamp-on (no lid over discharge)
Outlet: 6" center bottom discharge; 41.5" discharge height
Ports: (3) side injection ports
Controls: Start/Stop control panel
Frame: Painted carbon steel legs with casters
Model | DRB-20 |
Category | Mixers |
Subcategory | Ribbon Blenders |
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory