Stock No.:
50467040Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI
Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,
MFR: Ketema
Stock No.:
44604001Used J.H. Day Plow Type Turbulent Mixer – 304 Stainless Steel, 3.5 Cu. Ft. | High-Performance Industrial Mixer with Side-Entering Pinned Disc Mill
Used- J.H. Day Plow Type Turbulent Mixer, 304 Stainless Steel. 3.5 Cubic feet total capacity. Non-jacketed chamber approximately 20" diameter x 22" straight side. 3" Diameter shaft with blades and end scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1800 rpm Sterling variable Speed-trol motor. Includes a side entering pinned disc mill, driven by a 10 hp, 3/60/230/460 volt, 3490 rpm motor. Top access door with a charge port, 8" center bottom outlet with a manually operated plug valve. Includes a control panel. Mounted on a carbon steel frame.
MFR: J H Day
Stock No.:
10755151Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder – Industrial Used
Used- Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.
MFR: Gloucester
Stock No.:
114534753.5" Readco Twin Screw Continuous Processor
Used- 3.5" Readco Twin Screw Continuous Processor, model 3 1/2 HVY DU. Heavy duty design, stainless steel product contact surfaces, jacketed barrel rated 150 psi at 600 f, cored shafts with rotary units, driven by 50 hp, 460 volt motor, machine currently set up with cantilevered screws with adjustable gap ribbon die, with spare set of screw splines set up for end bearing housing, on base. Mfg. 1987.
MFR: Readco
Stock No.:
53713026Used Conair / Jetro Model 304 Strand Pelletizer – 600 lb/hr Plastic Pelletizing
Used Conair / Jetro Model 304 Strand Pelletizer 600 lb/hr Plastic Pelletizing Machine. Approximate capacity up to 600 lbs. per hour (depending on rotor and speed). Approximate 6" diameter x 4" face cutting rotor with 20 fixed blades. Approximate feed opening 3.5". Strand diameter 0.12", upper feed roll 3-1/4" diameter x 3-1/4" face, lower feed roll 1-9/16" diameter x 4" face. Driven by 2hp 3/60/230/460v 1750rpm XP motor. Serial# 6-040894.
MFR: Conair
Stock No.:
53713031Sweco LS30S 30 Inch Circular Vibratory Screener - Used Stainless Separator
Used Sweco 30" Diameter Model LS30S Circular Screener, Stainless Steel. Double Deck, 3 separation. Driven by a 1/2 HP, 3/60/230/460 Volt, 1140 rpm motor. Mounted on painted carbon steel base with casters. Serial# 589-74F.
MFR: Sweco
Stock No.:
53452001Eirich Model PPB030 Stainless Steel Paddle Blender
Used- Eirich / American Process Paddle Blender, Model PPB030, 30 Cubic Feet Capacity, Stainless Steel. Non-jacketed trough approximately 90" long x 30" wide x 39" deep. Single shaft approximate 4" diameter with (17) paddles, approximate 11.5" x 5" x 5/8" thick. Driven by a 7.5hp (5.5kW), 3/60/230/460 volt, 1755 rpm gear motor, final rpm 61. (2) Piece top hinged cover with 44" x 30" infeed section. End bottom outlet 8" x 8" with slide gate valve. Mounted on (4) legs. Serial# 807495, Built 2016. Last used in shredded cheese application. 3/60/460 Volt.
MFR: American Process Systems
Stock No.:
54115001Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel
Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.
MFR: Tolhurst
Stock No.:
54399008Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder – High-Speed Lab & Production Compounding System
Used Coperion Werner & Pfleiderer ZSK 30-W9/2 Twin Screw Extruder High-Speed Lab & Production Compounding System. (2) 30 mm diameter side by side screws, 33.3:1 L/D ratio, 8 total barrel sections, (7) heated barrels, electrically heated water cooled. Driven by a 10.4 kw(14hp) -440-volt AC drive motor via a gear box. Screw speed maximum 500 RPM. Frame mounted, Control panel. Weight 1.1 tonnes. Extruder: 2800 mm L x 850 mm W x 1300 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: Werner & Pfleiderer
Stock No.:
54399009Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder – Compact Pilot Compounding System
Used APV PGX 30 Twin Screw Extruder with K-Tron T22 Feeder Compact Pilot Compounding System. 30 KG (66 lbs) per hour. (2) 30 mm diameter side by side screws, 10:1 L/D ratio. Electrically heated water cooled barrel. Driven by a 4 kw (5.36hp) -440-volt AC drive motor via a gear box. Screw speed maximum 161 RPM. Frame mounted on 4 wheels. K-Tron T22 twin screw feeder. Control panel mounted on extruder. Weight approx. 400 kgs. Extruder: 1800 mm L x 800 mm W x 2200 mm H. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.
MFR: APV
Stock No.:
11059397Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System – 30 HP Explosion Proof Mixing Platform
Used ROSS HSM-430SC Inline High Shear Mixer with SLIM Powder Injection System 30 HP Explosion Proof Mixing Platform. Solids (powder) / Liquid Injection Manifold (SLIM). Equipped with 3" Liquid inlet, 2.5" Powder Inlet and 3" Liquid outlet. Driven by 30 HP, 208-230/460 volt, 1760 rpm Explosion Proof (XP) Motors. Powder / Liquid Dispersing / Mixing System. The Liquid stream enters the mixer and immediately encounters the powder (solids) at the high shear zone (rotor and stator assembly). The resulting dispersion is expelled centrifugally through the stator opening at high velocity.
MFR: Ross Industries
Stock No.:
10755147Used Tria Model 900 NS-R Pull Roll Granulator – High-Performance Industrial Granulator
Used Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60
MFR: Tria