Used Gloucester Plastics Equipment

Stock# 10755143

Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ratio of 10.73:1 and is direct driven by a 60 HP D/C motor with Saftronics SCR control. Manual screen changer mounted on the extruder discharge. Includes panel with controls. Reported to be reconditioned.

Stock# 10755144

Used Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperature control panel and 5-hole strand die

Stock# 10755150

Used Gloucester 3.5" Single Screw Extruder, Model 35250R2. 3.5" diameter screw, 32:1 L/D. Having an electrically heated, air cooled, and non-vented barrel at approximately a 65" center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is directly driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. Oil pump with heat exchanger on the gearbox for cooling. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/11.

Stock# 10755151

Used Gloucester Model 35250R2 3.5" Diameter Single Screw Extruder. 3.5" diameter screw, 32:1 L/D. Has an electrically heated, air cooled, vented, and plugged barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio of 18.17:1 and is direct driven in a wraparound manner by a 100 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is loose. Includes three (3) new / rebuilt screws. 460/3/60. Serial# 36736/12.

Stock# 10755152

Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is set up for Contra-Cool but does not include blower. Gearbox has a reduction ratio 13.75:1 and is direct driven in a wraparound manner by a 60 HP Baldor D/C motor with Saftronics SCR control. One (1) HP pump with heat exchanger on the gearbox. Originally manufactured in 1995 and completely reconditioned in 2011 and never put back into service. All wiring on the extruder is run to a terminal strip. New control panel has fourteen (14) zones of temperature controls. Drive control is supplied loose. Includes two (2) new / rebuilt screws. 460/3/60. Serial# 36736/25.