Waste Water Equipment
Stock No.:
42919001Used Alfa Laval MAB-204S-24-60 Oil Purifier Disc Centrifuge
Used- Alfa Laval Model MAB-204S-24-60 solid bowl disc-stack centrifuge designed for oil purification, clarification, and liquid/solid separation. Unit features a stainless steel bowl with aluminum cover and is driven by a 5 HP, 230/460 volt motor. Centrifuge has an approximate maximum bowl speed of 8,500 RPM, 0.4-gallon sludge capacity, and is rated for up to 1,140 GPH on SAE 10 lube oil. Serial # 4055100. The solid-wall, batch-type disc-stack design can operate as a purifier or clarifier for separating water and fine solids from contaminated oils. Suitable applications and products include lube-oil purification and recovery, water removal, fine-solids separation, industrial and marine oil handling, and fluid reclamation.
MFR: Alfa Laval
Stock No.:
44597001Used Alfa Laval MAPX-313-TGT-29-60 Disc Stack Oil Separator – Skid Mounted
Used Alfa Laval Model MAPX-313-TGT-29-60 Oil Purifier Desludging Disc Stack Centrifuge With 329 Stainless Steel Bowl And 20 HP Drive Motor. Designed for liquid-liquid-solid separation of compatible oil streams containing water and suspended solids. The rotating disc stack separates components according to density, allowing oil and water to form separate liquid phases while denser solids collect at the bowl periphery for discharge. Features an aluminum top cover and a direct-drive arrangement powered by a 20 HP motor rated at 1,770 RPM, 230/460 volts, 3-phase, 60 Hz. Includes control panels and is mounted on a skid. Serial number 2942549. Possible applications include water and suspended solids removal from compatible fuel oils, diesel oils and lubricating oils used in marine, engine and power generation systems, subject to oil properties, operating temperature and installed bowl configuration.
MFR: Alfa Laval
Stock No.:
46665001Used Alfa Laval WSPX-307-71G Desludging Disc Stack Centrifuge – 8,375 RPM, 7.5 kW
Used Alfa Laval Model WSPX-307-71G Desludging Disc Stack Centrifuge With 316 Stainless Steel Bowl Assembly And 8,375 RPM Maximum Bowl Speed. Features a concentrator configuration for liquid-liquid-solid separation, with aluminum bowl covers and light-phase liquid discharge through a centripetal pump. The rotating disc stack separates components according to density, allowing two liquid phases to separate while denser solids collect at the bowl periphery for discharge. Listed capacity is approximately 22 GPM, depending on feed composition, viscosity, operating temperature and separation requirements. Sludge space is approximately 0.87 gallons. Equipped with a belt drive powered by a 7.5 kW motor requiring 380 volts, 3-phase, 50 Hz electrical service. Mounted on a supporting frame. Possible applications include removal of separable tramp oil and suspended solids from compatible water-based metalworking coolants, parts-washing liquids and industrial process water, subject to fluid compatibility and installed separation configuration.
MFR: Alfa Laval
Stock No.:
47380002Alfa Laval VNPX 407-SGT-34-50 Desludger Disc Centrifuge
Used- Alfa Laval VNPX 407-SGT-34-50 Desludger Disc Centrifuge. Stainless steel construction (product contact areas), clarifier design (liquid/solid separation), Approx. 18.5 KW 380/3/50 drive motor. Previously used in a candy application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896014Alfa Laval BRPX 313 SFD-34 separator centrifuge
Used- Alfa Laval BRPX 313 SFD-34 separator centrifuge, with tools and control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896016Used Alfa Laval MAB 103 Solids Retaining Centrifuge – 2010, 0.75 kW Motor, 14 kW Heater, OCM-C 103 Tools
Used- Alfa Laval Solids Retaining Centrifuge, Module MAB 103 used OCM-C 103 Tools Year 2010 Motor 0,75 kW Heater 14 kW Continuous clarification of heavy fuel oil or lubricating oil from solid particles. Hydraulic capacity Maximum 1,4 m3/h Bowl speed 8570 - 8600. Serial# 4186163/2010. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896018Used Alfa Laval MAB 205 S-24-60 Centrifuge – 5150 L/h Hydraulic Capacity, 5.8 kW Motor, With Tools
Used- Alfa Laval MAB 205 S-24-60 Centrifuge. Hydraulic capacity 5150 l/h. Driven by a 5.8kw 3/60/440v 1755 l/min motor. Includes used tools 3pcs. Serial# 4009052. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896019Used Alfa Laval MAB 206 Separator Centrifuge – Industrial Disc Stack Clarifier
Used- Alfa Laval MAB 206 Separator Centrifuge. Serial# 2929046. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896022Used Alfa Laval PAPX 307 Crude Palm Oil Purifier – 8,000 L/h, Stainless Bowl, 7.5 kW Motor
Used- Alfa Laval PAPX 307 SGD -11G Crude palm oil. Alfa laval PAPX 307 purifier Bowl - stainless steel Hydraulic capacity 8.000l/h Motor 7,5 kW. Application Crude palm oil. And other oils. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896024Used Alfa Laval IFB 403 X-73 Disc Stack Separator – 7500 RPM, 230V, With Tools
Used- Alfa Laval Separator IFB 403 X-73, 7500r/min 3-50/60Hz 230V. Serial# 4138048. Used tools. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
Stock No.:
49896025Used Alfa Laval PAPX 307 SGD-11G Disc Stack Centrifuge | 8,000 L/h | 11.25 HP Motor | Crude Palm Oil Purifier | Stainless Bowl |
Used Alfa Laval PAPX 307 SGD-11G Disc Stack Centrifuge | 8,000 L/h | 11.25 HP Motor | Crude Palm Oil Purifier | Stainless Bowl | Serial# 553895-01. Hydraulic capacity 8.000l/h Motor 11.25HP/7,5 kW. Application Crude palm oil. And other oils. Overall dimensions: 1150 mm x 700 mm x 1300 mm high. Weight approx. 1 tonnes. Serial# 553895-01. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Alfa Laval
