Waste Water Equipment

Used Niro Mobile Minor Spray Dryer – Stainless Steel | With Atomizer | Serial #1952

Used Niro Mobile Minor Type HT Portable Spray Dryer, Stainless Steel. Approximate 32" diameter x 24" straight side. Drying capacity approximate 2.2-15.4 lbs (1-7 kilos) an hour. Electrically heated, temperature approximately up to 350 degrees C. Top entering Niro rotary atomizer, air driven. Includes cyclone, control panel. Center bottom outlet. On wheels. Serial# 1952.

MFR: Niro

Used Alfa Laval Solid Bowl Decanter Centrifuge – Model Foodec-209

Used- Alfa Laval Solid Bowl Decanter Centrifuge, Model Foodec-209, 316 stainless steel construction (product contact areas). Maximum bowl speed 4400 rpm. Maximum G force 3030. Single lead conveyor, 360 degree solids discharge ports with wear inserts, base, casing with CIP spray header, Approx. 15 kW (20hp)main drive motor, feed pipe, safety guards, gearbox. On 4 legs. Includes: Stainless steel control panel. Serial# 5120827-2006, built 2006. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Laboratory Blown Film Line by Dr. Collin – 20 mm E20T Extruder with Winder

Used Dr. Collin Laboratory Blown Film Line Consisting Of: (1) Dr. Collin 20 mm single screw extruder, type E20T. Approximate 25 to 1 L/D ratio. (2) Zone non-vented barrel electrically heated, air cooled. Feed throat with hopper. Driven by a 1.1Kw, 3/50/400-volt motor. Approximate 2-1/2" diameter blown film die, (1) air ring with blower, (1) approximate 7.8" (200 mm) wide take off winder. Includes control panels. Serial# 9120-3914, New year 2014. Previously used in an R&D lab. Weight 440 lbs (200 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Dr. Collin

Used GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge – 5500 RPM, 2-Phase, Stainless Contact, WWT Application – 2011

Used- GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an WWT application. Serial# 8860-355, built 2011. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Used Alfa Laval AVNX 930B-31G Decanter Centrifuge – 3250 RPM, 45 HP, Stainless Steel

Used- Alfa Laval AVNX 930B-31G Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts. Maximum bowl speed 3250 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approximate 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing. On 4 legs. Previously used in a Wastewater Treatment Application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Alfa Laval, Decanter Centrifuge. Model: AVNX 5050B-31G

Used- Alfa Laval AVNX 5050B-31G Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts. Maximum bowl speed 2700 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approx 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing. On 4 legs. Previously used in a Wastewater Treatment Application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Alfa Laval AVNX 5060B-31G Solid Bowl Decanter Centrifuge

Used- Alfa Laval AVNX 5060B-31G Solid Bowl Decanter Centrifuge. Stainless steel on product contact parts. Maximum bowl speed 2700 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approx. 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing. On 4 legs. Previously used in a Wastewater Treatment Application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Alfa Laval DSNX 4555 Decanter Centrifuge – 316 Stainless Steel Solid Bowl System for Industrial Sludge Dewatering

Used- Alfa Laval DSNX 4555 Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3250 rpm, 20 deg. bowl angle. Single row of lined cake discharges ports, single lead conveyor, moon liquid plate dams, base, casing, 6 KNM gearbox with feed pipe, 55 kw 380/3/50 440volt/3/60 ABB main drive motor. On 4 legs. Control panel. New 1998. Weight 2 tonnes. Overall dimensions: 129" (3936 mm) long x 36" (1090 mm) width x 41" (1270 mm) high (decanter only). Previously used in a WWT application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018

Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018. Components include: Main drying chamber; Stainless steel atomizer .5mm jet nozzle assembly; Inlet air filter; Peristaltic pump; Blower; Heater; Compressor: U-bend; Conveying tube; Cyclone; Control panel; Additional ancillary equipment/parts. 3000 W max. heater power; 19.8 Ft/s max. blower speed; .515 gal/hr max. pump speed; 41-90 degrees F min/max. ambient temperature; Ambient to 392 degrees F temperature range.1/50-60/220-240V. Built 2018. Previously used for SiO/TiO2.

Used GEA Niro MSD800 Spray Dryer & Evaporation Plant | 5.2 TPH Fully Integrated Dairy System

Used- GEA Niro/TVR Fully-Integrated Evaporation and Spray Drying Plant. Model MSD800 Spray Dryer. 5.2 tons/hour nominal capacity. Suitable for dairy and related liquid concentration applications with TS up to 55%. Spray Dryer Features: Multi-stage spray dryer system (Compact design); Externally cladded drying chamber free of insulative material; X8 Spray nozzle atomization system; Complete with internal static fluid bed and external horizontal fluid bed for heating and cooling functions; GEA- designed and built bag house (powder filtration system); Air heating system including steam and electrical top-up heating; Powder handling equipment and discharge systems; Control panels fitted with frequency inverters. Rebuilt CDI-800 + BF in 2005 and GEA Baghouse replaced in 2007. Evaporator Features: Multi-stage falling film evaporator system; Configuration: 1x 3 stage MVR + 1x 5 Effect TVR & High Finisher; Mechanical Vapor Recompression (MVR); Thermal Vapor Recompression (TVR); Direct steam injection heating with regenerative section; Shell & tube pre-heater; Vacuum system complete with vacuum pumps; Configuration enables effective vapor reuse, reducing overall steam demand while maintaining stable product quality. Previously used in a dairy application.

MFR: Gea-Niro

Used Alfa Laval NX-309 Solid Bowl Decanter Centrifuge

Alfa Laval NX-309 Solid Bowl Decanter Centrifuge, stainless steel construction (Product contact areas), base, casing, gearbox, mounted on a platform, 25 hp drive motor, hydraulic back drive. misc. spare parts, push button control. Used. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Industrial Flottweg Decanter Centrifuge – Model S3E-3/408, Surimi Use, Excellent Condition

Used Flottweg Model S3E-3/408 Sedicanter Decanter Centrifuge. 316 stainless steel. Max bowl speed 7750 RPM, 10,100 x G, rated @ 1 TPH, 4" single lead TC spray conveyor, 15 KW motor 460/3/60, 4 KW backdrive, SIMP-drive 48.7:1 gearbox, feed tube, lube system, vibration switch/isolators, guards, chutes and control panel. Unitized on a SS skid. Prior use: Surimi. Excellent running condition.

MFR: Flottweg