Waste Water Equipment
Stock No.:
10151584Used Paget 316L Stainless Steel Shell & Tube Heat Exchanger – 564 Sq. Ft., Horizontal
Used Paget 316L Stainless Steel Shell & Tube Heat Exchanger 564 Sq. Ft., Horizontal. Approximately 564 Square Feet. 316L Stainless steel shell rated 150 psi at -20 to 120 degrees F. (293) 316L Stainless steel 3/4'' tubes rated 50 psi at -20 to 250 degrees F. National Board # 26149, Serial # 21-304, built 2022.
Stock No.:
10151633Used Mueller 5,700 Gallon Jacketed Pressure Tank | 21,000 Liter Stainless Steel Fermentation Vessel
Used Mueller 5,700 Gallon Jacketed Pressure Tank | 21,000 Liter Stainless Steel Fermentation Vessel, Model F.95" ID x 155" T/T. 268" OAH.Internal 25 psi at 100 degrees F, Jacket rated 100 psi at 100 degrees F.304 stainless steel, vertical, dish top and cone bottom, 16" bottom manway with 3" CBO.Serial # 384634-4, Built 2008.Previous use was brewing beer.
MFR: Mueller Corp
Stock No.:
48325001Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11 long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692A. National Board # 3606. Built 2012.
MFR: Joseph Oat Corp.
Stock No.:
48325002Unused Joseph Oat Corporation 8-Pass U-Tube Shell & Tube Heat Exchanger – 5,700 Sq Ft, Carbon Steel Shell, 304L SS Tubes
Unused- Joseph Oat Corporation 8 Pass U Tube Shell & Tube Heat Exchanger, 5700 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (1194) 3/4" Diameter x 11' long 304L stainless steel tubes rated 150 psi at 200 degrees F. 304L Stainless steel head and tubesheets. Openings for shell (2) 14", for tubes (2) 10". Mounted on saddles. Serial # 2692B, National Board # 3607. Built 2012.
MFR: Joseph Oat Corp.
Stock No.:
409352Pre-Owned Vulcan K6ETT Electric Counter Kettle | 6 Gal | 50 PSI
Used Vulcan-Hart Model K6ETT Electric Counter Tilting Kettle, 6 Gallon Capacity. Approximately 11.8" Diameter x 14-1/2" deep. Ellipsoidal bottom. 2/3 Jacketed rated 50psi at -20 to 300 degrees F. Frame mounted. National board# 21596, Serial# 46-3002235, Built 2011. 3/1PH 50/60HZ 8/10KW 208/240V requirements.
MFR: Vulcan
Stock No.:
50058011Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | Stainless Steel | 1-Year Warranty
Used Sharples P-660 Super-D-Canter Centrifuge | 6000 RPM | New Motors & PLC Panel | 1-Year Warranty, stainless steel construction (product contact areas, max bowl speed 6000 rpm, single lead conveyor w/welded hardfacing wear protection, base, casing, feed pipe, 95:1 planetary gearbox, (New) 10 HP Main Drive motor, (New) 5 hp backdrive motor, mounted plate w/ vibration Isolations. Mounted on approx. 4 stainless steel stand w/casters, safety guards, (New) programable logic control/drive panel. (Reconditioned with warranty)
MFR: Sharples
Stock No.:
14191145Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation
Used Sharples P-660 Decanter Centrifuge | 6000 RPM | Stainless Steel | 7.5 HP Main Drive | Mounted w/ Vibration Isolation. Stainless Steel. Main drive motor 7.5 hp 3/60/230-460 volts, fixed speed. Backdrive motor2 hp 3/60/208 230-460 volts fixed speed. 6000 rpm max speed, 95:1 gearbox. Mounted on table with vibration isolators.
MFR: Sharples
Stock No.:
10755166Used Sweco LX60C168 60” Low Profile Screener – Single Deck, 3D Motion, Spare Motor & Springs, Built 2024
Used- Sweco Model LX60C168 60" Single Deck Low Profile Screener. The Sweco LX Low Profile Flow-Thru Separator allows for high capacity wet or dry scalping in a compact, low headroom design. Dual .69 hp motors mounted on opposite sides of the LX allow unrestricted flow of material and create the 3-D motion that allows oversize material full discharge, keeping the screen clear for maximum product flow. Low headroom requirements (as little as 15 inches) and straight flow design, allow the LX to fit easily into existing product lines without reworking the entire system. 12" center bottom outlet. Includes used spare motor, and six (6) spare springs. Unit is mounted on a 27" high base. No lid. " screen installed. 230-460/3/60-volt input. Serial# 554445-A-09/24, built 2024.
MFR: Sweco
Stock No.:
53529001Used Sweco 60” Vibro-Energy Separator – Stainless Steel, Model US60S88
Used- Sweco 60" diameter Vibro-Energy Separator, Model US60S88, Stainless Steel. Single deck, single separation. Missing top frame. Driven by 2.5hp 3/60/230/460 volt, 1160rpm motor. Mounted on stainless steel frame with casters. Serial# US60-387-03.
MFR: Sweco