Waste Water Equipment

https://images.aaronequipment.com/ItemImages/Dryers-Drying-Equipment/Spray-Dryer/Pentronix-370_41023022_aa.jpg

Stock No.:

41023022

Used Pentronix PTX 370 Spray Dryer – Stainless | Rotary Atomizer | Electric Heated | Digital Controls

Used- Pentronix PTX Model 370 Spray Dryer. Electrical heater, 47-1/2" diameter x 27-1/2" straight size x 26" cone interior, stainless steel construction, top mounted rotary atomizer with motor, thermocouple, disconnect switch with on/trip/off/reset/open, digital inlet temperature controller, temperature recorder, Ono Sokki TM-225 Speed Control for atomizer, atomizer voltage gauge, inlet blower button, exhaust blower button, atomizer on/off button, small Roller Pump for feeding liquid to dryer, Horie Industries Centrifugal Fan .2 kw/3500 rpm, 12" bottom discharge with flange for collector pan (pan not included).

MFR: Pentronix

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Feldmeier_54296003_aa.jpg

Stock No.:

54296003

Used Feldmeier 4,700 Gallon 304L Stainless Steel Tank – Vertical Process Vessel with

Used- Feldmeier 304L Stainless Steel Tank, Approximate 4,700 Gallon Capacity. Vertical, slight dished top and bottom. Approximately 114" diameter x 102" straight Side. Openings Top: 24" manway with cover, 6" vent, (2) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs. Serial# 19E0882.

MFR: Feldmeier

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Feldmeier_54296008_aa.jpg

Stock No.:

54296008

Used Feldmeier 4,700 Gallon Stainless Steel Tank – Vertical Vessel with 6" Bottom Outlet

Used- Feldmeier 304L Stainless Steel Tank, Approximate 4,700 Gallon Capacity. Vertical, slight dished top and bottom. Approximately 114" diameter x 102" straight Side. Openings Top: 24" manway with cover, 6" vent, (2) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs.

MFR: Feldmeier

https://images.aaronequipment.com/ItemImages/Tanks/Stainless-1000-4999-Gal/Feldmeier_54296009_aa.jpg

Stock No.:

54296009

Feldmeier 4,700 Gallon Vertical 304L Stainless Steel Tank – Industrial Storage Vessel

Used- Feldmeier 304L Stainless Steel Tank, Approximate 4,700 Gallon Capacity. Vertical, slight dished top and bottom. Approximately 114" diameter x 102" straight Side. Openings Top: 24" manway with cover, 6" vent, (2) 4", 2". 6" Center bottom outlet with 24" discharge height. Mounted on (4) stainless steel legs.

MFR: Feldmeier

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Heat-Inc_45477003_aa.jpg

Stock No.:

45477003

Used Heat Transfer Systems U-Tube Shell and Tube Heat Exchanger | 4,749 Sq Ft | High-Efficiency Industrial Unit

Used- Heat Transfer Systems U-Tube Shell and Tube Heat Exchanger. Approximately 4749 Square Feet, Horizontal. Carbon steel shell rated 80 psi at -20 to 330 degrees F. (466) 3/4" Diameter x 26' long carbon steel tubes rated 100 psi at -20 to 150 degrees F. Carbon steel tubesheet and head. Openings: shell 6", 18", openings for tubes (2) 14". Mounted on carbon steel saddles. Serial # 12915-6, National Board #1804. Built 2007.

MFR: Heat Inc

https://images.aaronequipment.com/ItemImages/Heat-Exchangers/Shell-and-Tube-Carbon/Daekyung-Machinery-and-Engineering-AJ12S-54X216_46379013_aa.jpg

Stock No.:

46379013

Unused 2-Pass Shell & Tube Heat Exchanger – 4,625 Sq. Ft., Carbon Steel, Horizontal

Unused- 2 Pass Shell & Tube Heat Exchanger. 4,625 Square Feet, Carbon Steel, Horizontal. Shell rated 358 psi/ full vacuum at -20 to 650 degrees F. (1,078) 1" Diameter x 18' long tubes rated 470 psi/ full vacuum at -20 to 650 degrees F. Openings: shell 24", (2) 18"; tubes (2) 24". Saddle mounted. Mfg. Daekyung Machinery & Engineering. Serial# DK2007-235. National Board# 2486. Built 2008. Dimensions 338"L X 88"W X 102"T. Weight 69,200 lbs. Documents available. Nitrogen purged by manufacturer after testing and prior to storage.

MFR: Daekyung Machinery & Engineering

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Kason-K48-2-SS_10151586_aa.jpg

Stock No.:

10151586

Used Kason K48-2-SS Stainless Steel Vibratory Separator – 40” Diameter, 2-Deck Screening System

Used- Kason 2-Deck Kason Stainless Steel Separator Screen, Model K48-2-SS. 40" diameter. Driven by a 2.5 hp motor, 230/460 volt. Mounted on wheels. Serial# M-9646. Built 2013.

MFR: Kason

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-XS48S66TLU_10151587_aa.jpg

Stock No.:

10151587

Used Sweco XS48S66TLUE Stainless Steel Vibratory Separator – 48” Diameter Single Deck Screener

Used- Sweco Stainless Steel Separator Screen, Model XS48S66TLUE. 48" diameter. Single-Deck. Serial# 308513-A08/05.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Kason-K48-1-SS_10151588_aa.jpg

Stock No.:

10151588

Used Kason K48-1-SS Single Deck Stainless Steel Separator Screener | 48" Vibratory Sifter

Used- Kason Single Deck Stainless Steel Separator Screener, Model K48-1-SS. 48" diameter. Serial# M-9158. Built 2012.

MFR: Kason

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Thermal-Engineering-SAB-48BD11_10151590_aa.jpg

Stock No.:

10151590

Used Thermal Engineering SAB-48BD11 Stainless Steel Separator Screener – 48" 2 Deck Vibratory Screener

Used-Thermal Engineering Stainless Steel Separator Screener, Model SAB 48BD11. 48" diameter. 2 decks 3 separation. Serial# SAB-97-1959. Driven by a 2.5 hp motor, 230/460V. Built 1997.

MFR: Thermal Engineering

https://images.aaronequipment.com/ItemImages/Screeners-Sifters/Circular-Screeners/Sweco-MX48S888TLWC_40425048_aa.jpg

Stock No.:

40425048

Used Sweco MX48S888TLWC 48” Vibratory Screener – Industrial Stainless Steel Separator

Used- Sweco Model MX48S888TLWC 48" Diameter Screener, Stainless Steel Construction. 48" inside diameter. Double deck, triple separation. Driven by 2.5 hp 3/60/460 volt, 1160 rpm motor. Mounted on carbon steel base. Serial# 98180-A05/11.

MFR: Sweco

https://images.aaronequipment.com/ItemImages/Centrifuges/Basket-Bottom-Dump/Ketema-48x30_11453481_aa.jpg

Stock No.:

11453481

Ketema/ATM 48" x 30" Mark III Perforated Basket Centrifuge. Used.

Used-Ketema/ATM 48" x 30" Mark III Perforated Basket Centrifuge, 316L stainless steel construction (product contact areas), top load, bottom unload, Max bowl speed 1380 rpm, tri-pod suspension, single motion plow, feed and rinse pipes, rated 85#/cu. ft. capacity, hinged inspection door w/sight-glass, (2) CIP nozzles; Built 1992.

MFR: Ketema

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.