Waste Water Equipment

Used Stainless Steel Single Wall 2,400 Gallon Storage Tank

Used- 304 Stainless Steel Single Wall 2,400 Gallon Storage Tank, measures 69" diameter X 168" high. Includes side bottom manway with bottom outlet.

Used Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge

Used- Alfa Laval / Sharples PM-70000 Super-D-Canter Solid bowl Decanter Centrifuge, (same size as a P-5400), stainless steel construction (product contact areas). 5" single lead conveyor, base, casing, gearbox, 200 HP main drive motor, lubrication pump system.

MFR: Sharples

Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020

Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020

MFR: Alfa Laval

Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated

Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.

MFR: Roark Enterprises

25 HP Industrial Blower by IATC – 18,000 CFM, Model BISW 365-79 CL2/B

Used- Industrial Air Technology Corp. Blower, Model BISW 365-79 CL2/B 360 CW. 18000 CFM, Serial # 60531-A. Driven by a 25 HP, 3/60/208-230/480V, 1180 RPM motor.

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022

Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022. Rated 25kW. 42.5kW (approx. 56 HP) at 3600 RPM. Meccalte model ECP28 L4 alternator. On casters. OAD: 60" x 30" W x 52" H.

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Si

Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Sigma Control 2. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 39,567 run hours and 30,258 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1125, built 2012.

MFR: Kaiser

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 H

Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 HP | 112 CFM. Rated for 125 PSIG at 112 CFM. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 42,000 run hours and 33,000 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1124, built 2012.

MFR: Kaiser

Used Kaeser AS 25T Rotary Screw Air Compressor with Integrated Dryer | 125 PSIG,

Used Kaeser Rotary Screw Air Compressor, Model AS 25T. Includes integrated refrigerated Dryer. Rated 125psig at 111 CFM. Driven by a 25hp, 3/60/208-230/460 volt, 3560rpm motor. Tier 1 Sound Enclosure. Kaeser Sigma Controller. Serial # 1400, Built 2008.

MFR: Kaeser

Used Onan 250 kW Natural Gas Generator | Model 250GEBC | Cummins G1A855G3 Engine | 480V | 570 Hours (2005)

Used- Onan 250kW Generator Model #: 250GEBC RPM: 1800 Year: 2005 Engine # 25302574 Engine Model# G1A855G3 Phase: 3 Volts: 480 HZ: 60 Hours: 570 Natural Gas. Built in 2005, this generator operates at 1800 RPM and supports a three-phase electrical system. It delivers a voltage output of 480 volts at a frequency of 60 Hz, making it suitable for various heavy-duty tasks and ensuring efficient energy distribution across demanding environments. Driven by a Cummins Engine, Model G1A855G3, Serial# 25302574.

MFR: Onan

Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...

Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. One nozzle has 8" Badger Industries expansion joint. Overall dimensions are 60" wide x 74" tall x 90" long.

MFR: Ingersoll-Rand

Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...

Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. Overall dimensions are 60" wide x 74" tall x 90" long.

MFR: Ingersoll-Rand