Power Generation Equipment
Stock No.:
54407001Used Travaini TRHE 32-45/C/RZ Liquid Ring Vacuum Pump – CO2 Roughing Pump System with Intervac Booster
Used- Travaini Liquid Ring Vacuum Pump, Model TRHE 32-45/C/RZ. Rated 28.8" vacuum at 11 cfm. 3 HP, 3450 RPM, 3/60/230/460V motor. With Fenwal Thermostat and Model PLT3206/5CGF Intervac pump. Approx. OAD: 60" L x 40" W x 70" H. Located 2629 Seventh Street Berkeley CA 94710; Can load; $4,000 PRD; Seller is working on getting us a video; Can accommodate inspection; no docs; was previously used as "CO2 Vacuum Roughing Pump"
MFR: Travaini
Stock No.:
51610001Used Thermatool Tube Cutting Machine - 2”-4.5” OD, ABB Drives, Scrap Conveyors
Used- Thermatool Tube Cut-Off Machine. OD Range: 2"-4.5", Max Wall Diameter: .235". Max Speed 250 FPM, Hydraulic Accelerator Hydraulic Clutch, Encoder, Two Scrap Goose Neck Conveyors Unico Controller, ABB Drives, spare cut off die.
Stock No.:
53938001Used Ultrasonic Systems Prism 400 Spray Coater – 400mm x 400mm | 600mm/s | Tilt & Rotation | Built 2023
Used- Ultrasonic Systems Spray Coater, Model Prism 400. 600mm/second (20"/sec) coating speed; 400mm x 400mm x 125mm (15.75" x 15.75" x 4.72") application area; Up to 45 degrees in two directions tilt motion; 0-90 or 0-180 degree theta rotation range; Lead screw, stepper drive Z motion; Precision ball screw X/Y platform; 16" max. X and Y axis stroke; 0-150 degrees C (32-302 degrees F) heat plate set point, configurable up to 200 degrees C (392 degrees F). With stand. 1/50-60/220V. Built 2023.
MFR: Ultrasonic
Stock No.:
52283019Buy Used Vac-U-Max VPU-S-3T Vacuum Conveyor – Industrial Bulk Material Handling
Used- Vac-U-Max Model VPU-S-3T Positive Displacement Vacuum Conveying System with Sutorbilt 3 HP blower. Rated approximate 51 CFM @ 12" HG. Driven by a 3 HP, 230/460 volts, 3-phase, 60 Hz, 1730 RPM motor. Includes 2" diameter NPT inlet & outlet with 2 silencers. Mounted on carbon steel frame.
MFR: Vacumax
Stock No.:
52659016Pre-Owned VanKel VK 7010 Apparatus – 8 Spindles, VK 8000 Sampler
Used- VanKel Lab Equipment, Model 10-0700. VK 7010 apparatus set up for 8 (4+4) spindles, (8) 3-1/2" diameter vessels (requires both spindles and vessels). With VK 8000 Automatic Sampling Station can handle 1/2" diameter vials. VK 806 Syringe Pump, (2) VK 750D Heater Circulators, water range from Ambient to 55 degrees Celsius, range of +/- 0.1 Degree C. Includes BIO-DIS Reciprocating Cylinder Apparatus temp range from 5 to 40 Degrees C. 5-60 dips per minute.
Stock No.:
41174083Used Veronesi AF 1300 SFD Desludger Disc Centrifuge – 6,900 L/H Stainless Steel Clarifier, Reported Rebuilt
Used Veronesi Model AF 1300 SFD 12250 FWP Stainless Steel Desludging Disc Stack Centrifuge With 6,900 Liter Per Hour Capacity, Reportedly Rebuilt. Industrial centrifugal separator designed for high-speed separation, clarification and removal of suspended solids from compatible liquid process streams. Rated for a processing capacity of approximately 6,900 liters per hour (1,825 gallons per hour), depending on product characteristics and separation requirements. Features a disc-stack separation system with desludging capability for removing accumulated solids during processing. Constructed with stainless steel product contact surfaces and identified as a purifier-design separator with liquid/solid clarification capabilities. Equipped with a 15 kW drive motor requiring 380 volts, 3-phase, 50 Hz electrical service. Serial #7809-12881. Unit is reported to have been rebuilt. Possible applications include centrifugal clarification, suspended solids removal, liquid purification and processing of compatible fish oil, animal fats, food processing liquids, fermentation broths, chemical solutions, industrial process liquids and other suitable liquid streams containing suspended solids.
MFR: Veronesi
Stock No.:
52708001Used OMAX Maxiem 1530 Waterjet Cutter – 52" x 122" Table | 30 HP Pump | 50,000 PSI | CNC Control
Used- OMax Maxiem Waterjet Cutting System; Model 1530; Cutting Area 52" X 10 Table Size 58" X 122" Z-Axis Travel 6" Intensifier Output 50,000 PSI Motor Size 30 HP; Equipped with OMax PC Based CNC Control; Omax M30 Direct Drive Pump; 500 Lb Abrasive Hopper; dual Side Drive Precision Rack & Pinion; Abrasive Hopper Settling Tank;
Stock No.:
54500001Used Omax 80X Precision Waterjet Cutting System | CNC Industrial Waterjet Cutter
Used- Omax Precision Waterjet Cutting System, Model 80X. Cutting Area 13' 4'' long x 6' 8'' wide. Table size 15' long x 7' 5'' wide. Speeds up to 180" min. Repeatability within 0.001''. Includes Garner sand tank and control cabinet. Serial # K511537.
Stock No.:
54315001Used Kulicke & Soffa Asterion Wedge Bonding Machine – Advanced Precision (Built 2023)
Used- Kulicke and Soffa Wedge Bonding Machine, Model Asterion. 300mm x 300mm bondable area. 0.1 um X and Y axes; 0.1 um Z-axis, 50mm Z-stroke; +/- 220 degree theta axis, .0057 degree theta axis resolution. 710mm D x 225mm H material handler bay size w/o insert, 710mm D x 460mm H open bay size. GS4 Pattern Recognition vision system. 1/50-60hZ/200-240V. Built 2023.
Stock No.:
10151306Westfalia SA-20-06-076 Desludger Disc Centrifuge, Used.
Used Westfalia model SA 20-06-076 stainless steel clarifier centrifuge. Has basic design bowl and stainless steel sludge pot. Paring device for light phase, clarifier design. Direct driven by 11 kW motor with coupling at maximum 7510 rpm. Sanitary covers including sediment cover. No controls. Last used on coffee. Rated capacity approximately 11000 L/H with 8 litre bowl volume and 4 litre solids holding space. Serial# 1710 560. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Westfalia
Stock No.:
10151356Used Westfalia MSA-160-01-076 Desludger Disc Centrifuge
Used-Westfalia Desludger Disc Centrifuge MSA-160-01-076 , stainless steel construction (product contact areas), max bowl speed 4500 rpm, light and heavy phase centripetal pump liquid discharge, 37 kW drive motor (460/3/60), sludge expansion tank, misc. tools.
MFR: Westfalia
