Power Generation Equipment

Used Nel Hydrogen Generator Model C30 – High-Purity 30 Nm³/h Hydrogen Production System (30 barg Output)

Used- Nel Hydrogen Generator, Model C30. Rated 30 Nm^3/hour (1140 SCFH) at 435 psig (30 barg), with 99.9998% purity. 3000 kPa (30 barg) hydrogen output pressure. 5 to 60 degrees C (41 to 140 degrees F) hydrogen temperature. 15.9 Nm^3/hour oxygen capacity. 5 to 60 degrees C (41 to 140 degrees F) oxygen temperature. 3/60/240V. Built 2019.

Used Pall Allegro Single-Use Chromatography Skid – Sartobind Cassette Holder | PLC | GMP Ready | Built 2019

Used- Pall Biotech Allegro Single Use Chromatography Skid and Purification Cassette Holder Gamma irradiated manifolds; No calibration of single use sensors required; Manifolds installed on front face of the system; Utilizes Artesyn valve block technology. Skid features a fully programmable PLC which complies with all cGMP guidelines; Touch-screen monitor; Software features data & event logging; Cassette holder can hold up to 30 of the Sartorius 0.8L Sartobind purification cassettes. Ready for immediate evaluation & usage. Built 2019.

MFR: Pall Corp

Parker Balston Model DB-5 Nitrogen Generator System

Used- Parker Balston Model DB-5 Nitrogen Generator System. Designed to convert compressed air supply into high purity compressed nitrogen. 60-100 degrees F temperature range. 1/2" NPT inlet/outlet. 110-140psig Inlet Pressure. 80psig outlet pressure. 50/60hz, 120v requirements.

MFR: Parker

Used PerkinElmer NexION 300X ICP-MS Tabletop Spectrometer for Sale

Used PerkinElmer NexION 300X tabletop ICP mass spectrometer, serial number 81XN2121702. System is equipped with a vacuum roughing pump, PolyScience cooling system, refrigerated chiller, onboard PC, and communications card. The NexION 300X features PerkinElmer's three-mode operation consisting of Standard, Collision, and Reaction modes, along with a triple-cone interface for sampling, skimming, and hyper skimming. Unit is configured for 3-phase, 60 Hz, 230V electrical service. Possible applications and suitable products include trace elemental analysis, metals analysis, environmental testing, food and beverage analysis, pharmaceutical testing, and other compatible laboratory ICP-MS applications.

MFR: Perkin Elmer

Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

Used- Baileigh Plasma Cutting System Consisting Of: Baileigh PT-44-VH Plasma Table; 4' x 4' cutting area; Automatic Height Detection; Water Assist Cooling; Industrial Down Draft Table; High Quality Stepper Motors on X and Y Axis; Fully Welded Main Frame Will Support Up to 1" Thick Mild Steel; Industrial Cable Track; Hardened, Ground and Polished Slide Ways; Control Console with Hand Held Pendant. 220 volt, 60 hertz; Built 2014.

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

Used Rite Boiler Co. Model 105S Natural Gas-Fired Low Pressure Steam Boiler – 19 BHP – Built 2020

Used- Rite Boiler Co. Natural Gas-Fired Steam Boiler, Model 105S. Compact, low-pressure steam boiler designed to provide reliable and efficient steam generation for a wide range of industrial and commercial applications. Rated at 798,000 BTUH input, 15 PSI maximum allowable working pressure, 19 boiler horsepower (BHP), a 250 degrees F maximum operating temperature, and 101 sq. ft. of heating surface. Engineered for dependable performance in process heating, sanitation, humidification, and other low-pressure steam duties. The boiler operates on natural gas with a 14" W.C. maximum fuel supply pressure, 7" W.C. minimum supply pressure at flow, 3.5" W.C. maximum manifold gas pressure, and 1.5" W.C. minimum manifold gas pressure. Electrical requirements are 120 Volt, single phase, 60 Hz. Designed for indoor installation only, Serial # 33706., National Board # 19478, Built 2020.

MFR: Rite

Used S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300...

Used-S.G. Frantz Co. "FerroFilter" electromagnetic separator. Model number 73F2. Serial number E1512. It is designed to separate magnetic materials from heavy slurries at a maximum flow rate of 1,300 to 4,000 gph. It has stainless steel contact parts and a swing back lid for cleanout. The cooling jacket is rated for 150 psi. This unit has a 3" threaded inlet and a 3" threaded outlet. 115 vdc 45 amps of power required. This unit sits on a carbon steel stand.

Pharmaceutical Sharples SP-725 Super Helix Centrifuge

Unused- Sharples SP-725 Super Helix Centrifuge, 316/317 stainless steel. Maximum bowl speed 9000 rpm, 10,000 x "G" force, sanitary design, all contact surfaces polished and free draining, cooling jacket, clean-in-place capability, steam sterilizable to 15 psig at 260 degree, full containment for handling biological or sterile materials, 10 hp main drive with 1 hp backdrive motor. Distinguishing features: sanitary design with polished finishes, biohazard containment, steam sterilized for aseptic operation clean-in-place capabilities, continuous operation. Ideal for biotech, pharmaceutical and food applications.

MFR: Sharples

Used HTC Hydraulic Shear – 1/2" Mild Steel, 3/8" Stainless Capacity – Industrial Plate Cutting

Used- HTC Shear. 1/2" mild steel cutting capacity; 3/8" stainless steel cutting capacity. 3/230-460V. Approx. OAD: 12.5 L x 8.33 W x 9.3 H.

MFR: HTC

Used Siebtechnik H-400 Contrubex Screening Centrifuge – 15 m³/h Capacity

Used- Siebtecknik H-400 Contrubex Screening Centrifuge. 316 Stainless Steel construction (product contact areas), 15 m3/h Feed Capacity, max bowl speed 2850 rpm, base, casing, feed pipe, rinse pipe, 20hp drive motor, safety guards .

MFR: Siebtechnik

Used Siebtechnik H-400 Screening Centrifuge – Pusher-Type, 316 Stainless Steel

Used- Siebtechnik Screening Centrifuge, Model H-400, Pusher-Type, 316 Stainless Steel Contact Parts. 400 mm (15.75") diameter bowl, rated for up to 2850 RPM. requires 15kw motor. Complete with main drive. Previously used at chemical processing facility.

MFR: Siebtechnik