Power Generation Equipment

Used Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

Used- Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

MFR: Cleaver Brooks

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Used- CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.

Used Cole-Parmer 7554-90 Peristaltic Pump – Includes #1718-21 Pump Head | Process Equipment

Used- Cole-Parmer 7554-90 Peristaltic Pump, With #1718-21 Head.

MFR: Cole Parmer

Industrial Flow Meter - Micro Motion D100S-SS, 48 GPM, 400 lb/min

Used- Micro Motion Flow Meter, Model D100S-SS. 316 Stainless Steel Product Contact Areas. Rated volume 0 to 48 gallons per minute, mass 0 to 400 pounds per minute. 1" inlet/outlet, temp range: -40 degrees C to 60 degrees C. Tube pressure 2250 max.

MFR: Micro Motion

Used Distek 2100B Dissolution System – 6 Vessel Positions, 500-1000ml

Used- Distek Dissolution System, Model 2100B.(6) built in vessel positions, 500ml to 1000ml Volume. 25-250rpm control range. 5/8" diameter nozzles, (6) 4-1/2" diameter vessel holders. Includes DS 4300 Dissolution Sampler, TCS0200B Temperature Control System. Serial# 2110487.

Used Distek DS4300 Dissolution Tester – Dual Bath Sampling Capability

Used- Distek Dissolution Tester, Model DS4300. The sampler is designed to accommodate up to two syringe pumps for dual bath sampling capability. Each syringe pump operates independently allowing for two different dissolution methods to be run simultaneously. 1/50/60/110V.

Used Dorr-Oliver PCH30 Stainless Steel Disc Nozzle Centrifuge – 71,019 kg/hr, 150 HP, 317L Bowl, 341 psi

Used Dorr-Oliver PCH30 Stainless Steel Disc Nozzle Centrifuge 71,019 kg/hr, 150 HP, 317L Bowl, 341 psi; 2,750 RPM max. bowl speed; 341 psi @ 430F max. working pressure; 316 stainless steel casing; 317L stainless steel bowl; Driven by a 150 HP, 480V motor. SN 92710-2. NB0418. Built 1988. With hydraulic pumping system.

MFR: Dorr Oliver

Used Dorr-Oliver H-30 Merco Nozzle Centrifuge – 316SS, 3300 RPM, 100–500 GPM, 125 HP, With Rotary Strainer

Used- Dorr-Oliver H-30 Merco Nozzle Centrifuge, 316SS. Max bowl speed 3300 RPM, rated @ 100-500 GPM, 125 HP motor 575/3/60/1785 RPM and rotary strainer.

MFR: Dorr Oliver

Unused LEWA Ecoflow High-Pressure CO2 Metering Pump

Unused 2018 LEWA Ecoflow high-pressure metering system configured for CO2 service with a rated capacity of 30 kg/min. System consists of a LEWA Ecoflow metering pump in a high-pressure CO2 configuration, Baldor-Reliance 75 HP Severe Duty motor, and complete drive assembly. This unused high-pressure metering package combines the LEWA Ecoflow pump, heavy-duty Baldor-Reliance motor, and drive components into a complete system for controlled CO2 metering applications. Possible applications and suitable products include high-pressure CO2 metering, dosing, and process feed applications handling CO2.

MFR: Lewa

Element 1 M-Series M13 Hydrogen Generator

Used- Element 1 M-Series M13 Hydrogen Generator. Output range 1150-1440 sLm. Minimum rated output 1313 sLm (170kg/day). Hydrogen delivery pressure10-30 psig from buffer tanks. Methanol/Water blend ratio. Woodward LCEM controls. HMI. Mounted on forkliftable frame. Approximately 40 hours.