Power Generation Equipment

Alfa Laval Disc Centrifuge, Model LAPX 404SGP-31G/CG.

Used- Alfa Laval Disc Centrifuge, Model LAPX 404SGP-31G/CG. Clarifier, 316 Stainless steel. Max bowl speed 9600 RPM, 11,000 x G, rated @ 4000 LPH, max solids capacity 33 LPH, 0-100C temp range. Liquid discharged under pressure, low shear disc inlet design, 3.7 KW motor 460/3/60/3600 RPM, sludge tank, piping, tools, Year 2021

MFR: Alfa Laval

Alfa Laval PX 55 Desludger Disc Centrifuge-Used

Used- Alfa Laval PX 55 Desludger Disc Centrifuge, Stainless steel contact parts, 6240 RPM max. bowl speed, clarifier design, centripetal pump liquid discharge, 15L (3.91 gal.) bowl volume; 4.6L (1.2 gal.) sludge space; /max. process temperature; 25 HP motor. 3/50-60/380-500V. Built 2017. Previously used for soybean oil.

MFR: Alfa Laval

Used Alfa Laval MAB-104B-24 Solid Bowl Disc Centrifuge – Liquid/Liquid/Solid Separation

Used- Alfa Laval MAB-104B-24 Solid Bowl Disc Centrifuge. 2205 Stainless steel construction (product contact areas). maximum bowl speed 7350 rpm, separator design (liquid/liquid/solid separation), aluminum top bowl cover, 2 hp (460/3/60/1750 rpm) XP motor. Duplex pump drive by drive assembly. Mounted on a cart with an XP panel, and casters. Serial# 4101219.

MFR: Alfa Laval

Brand-New Alfa Laval PU 625 Disc Stack Centrifuge | 3000 L/hr | 12,000 RPM | Industrial Oil Purification

Brand-New Alfa Laval PU 625 Disc Stack Centrifuge | 3000 L/hr | 12,000 RPM | Industrial Oil Purification. This high-performance separator is engineered for the continuous purification of industrial oils such as lube oil, fuel oil, and light process liquids. Designed with a high-speed disc stack bowl operating at approximately 12,000 RPM, it delivers exceptional separation efficiency with automatic discharge of both water and sludge phases. The system offers a throughput capacity of up to 3,000 liters per hour, depending on product characteristics. Constructed in stainless steel and mounted on a factory-original skid, the unit includes integrated piping, valves, and an electric inlet heater for optimal processing temperature. With a motor rated around 4.5 to 5.5 kW, this centrifuge is ideal for marine, energy, and industrial applications where clean oil and reliable operation are critical. Still in original conditionnever installed, never operatedthis is a rare opportunity to acquire a top-tier Alfa Laval unit ready for immediate deployment.

MFR: Alfa Laval

Alfa Laval BRPX-313-XGD-75-60 Desludger Disc Centrifuge, 18 kW Motor, PLC Controls (Used)

Alfa Laval BRPX-313-XGD-75-60 Desludger Disc Centrifuge, 18 kW Motor, PLC Controls (Used), 316 stainless steel contact areas, concentrator design, centripetal pump liquid discharge, 18kW (approx. 24 HP) 575/3/60 drive motor, Allen Bradley Micrologix 1100 PLC. Mounted on frame. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Alfa Laval MOPX-207-SGT-14-60 Desludger Disc Centrifuge – Stainless Steel Bowl, 17.5 HP Motor (Used)

Alfa Laval MOPX-207-SGT-14-60 Desludger Disc Centrifuge Stainless Steel Bowl, 17.5 HP Motor (Used). separator design (liquid/liquid/solids separation), centripetal pump liquid discharge, cast iron base assembly, flanged direct drive configuration, approximate 17.5 hp drive motor 575/3/60, control, water harness. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used Alfa Laval Vertical Disc Stack Centrifuge – Model USPX 204SGT-11CN-60, 8500 RPM, 3 HP, Refurbished

Fully refurbished. Used- Alfa Laval Vertical Disc Stack Centrifuge, Model USPX 204SGT-11CN-60. Solids ejecting. 8500 RPM max. bowl speed. Stainless steel contact parts. Driven by a 3hp 3/60/440v 3525rpm motor. Serial# 3535293, built 1999. Still in wrapping from refurbish and ready to go.

MFR: Alfa Laval

Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator

Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator-31CGL. Stainless steel construction. 65 cubic meters/hour max. throughput capacity. 4,480 max. bowl speed. 45 kW (approx. 60 HP), 3/60/480V motor. Skid mounted. With control panel and VFD motor starter. Unused since being fully refurbished.

MFR: Alfa Laval

Used Allied Engineering Super Hot Fire Tube Boiler, Model AAE-3000-N-M | 3M BTU/hr | Natural Gas | 160 PSI | BC-1 Controller | Skid Mounted

Used- Allied Engineering Super Hot AAE Series Fire Tube Boiler, Model AAE-3000-N-M. Natural gas, High/Low fire. 3M BTU/hr input, 1.2M BTU/hr output. Minimal relief valve pressure 2400 MBH. 160 psi maximum water pressure, 250 degrees F maximum temperature, 227 square feet heating surface. Skid mounted. Includes: Electronic Ignition, Stainless steel Burners, Gas Valve, Redundant Gas Valve, BC-1 Microcontroller, Operating Aquastat, Safety High Limit Aquastat, Temperature / Pressure Gauge, A.S.M.E. Pressure Relief Valve 30 p.s.i., Drain Valve, Draft Hood, Transformer, Control Panel Enclosure, Main On/Off Switch with Indicator Light. 60hz, 120 volt. Shack available. Serial # 7161. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Allied Engineering

Used Taylor Hobson 142-201 Ultra Autocollimator – 2-Axis | 0.001 Sec Read | SM2003 Software | Tripod & Reflector

Used- Taylor Hobson (Ametek) 2-Axis Photo Electric 142-201 Ultra Autocollimator. 0.2 sec (over central 800 sec) accuracy; 1800 sec range of measurement; 0.001 sec direct reading to. This two axis autocollimator is designed with a nominal range of 1800 seconds of arc, reading to 0.001sec., incorporating a solid state infrared LED light source and digital camera detector, and for the accurate measurement of small angular displacements. This autocollimator is used to measure: Angle (indexing head accuracy); Straightness (machine tool slides in two axes); Squareness (column to slideways); Parallelism (slideways). Includes SM2003 REV 2.9 Software; 50mm mounted flat reflector; adjustable tripod stand and plate for top of tripod.

MFR: Ametek

Unused Babcock & Wilcox FM 103-79 Natural Gas Boiler – 80,000 LB/HR Saturated Steam – ASME – Built 2022

Unused Babcock & Wilcox FM 103-79 Natural Gas Boiler 80,000 LB/HR Saturated Steam ASME Built 2022. Rated 80,000 lbs/hour (saturated steam). 175 psig at main steam outlet nozzle design pressure. 227 degrees F at economizer inlet feedwater temp. ASME Stamped, Hydrostatic shop tested.

MFR: Babcock & Wilcox

Unused Cosen SV-1100 Semi-Automatic Traveliong-Table Vertical Band Saw

Unused- Cosen Semi-Automatic Traveliong-Table Vertical Band Saw. Model SV-1100, 43" x 43", New 2014, EQUIPPED WITH: Control Panel, Semi-Automatic Hydraulically Traversing Table, Hydraulic Blade Tension, Automatic Blade Breakage Detection, Roller Bearing Guides. CATALOG SPECIFICATIONS: Throat Depth 43" 1100 MM, Height Capacity, Maximum 43" 1100 MM, Table Dimensions, L x W 96.5" x 65", Table Dimensions, L x W 2450 MM x 1650 MM, Table Feed, Length 25.6" 650 MM, Table Load Capacity 17361 LBS 7875 KG, Workbed Height 58.3" 1482 MM, Blade Length 346" 8800 MM, Blade Width 1.6" 41 MM, Blade Thickness 0.05" 1.3 MM, Blade Speeds, Inf. Variable 1500 to 6000 FPM, Blade Speeds, Inf. Variable 450 to 1800 MPM, Blade Motor, Horsepower 20 HP 15 KW, Hydraulic Motor, Horsepower 1 HP .75 KW, Coolant Motor, Horsepower 1/4 HP .186 KW, Floor Space Required, L x W 146" x 124", Overall, Height 169", Weight Approximately 8800 LBS 4000 KGNEVER BEEN USED, S/n SV1030012.