Power Generation Equipment

Used C.W. Brabender Plasti-Corder Mixer Extruder System – DR-2072 Drive, 7.5 HP DC Motor with Measuring Head & Recorder

Used- C.W. Brabender Plasti-Corder Mixer Extruder System, Model DR-2072 Drive System, 7.5 hp, dc motor. Serial# 0174/PE. Measuring Head Type R.E.E .6-230V 8.5AMP, Serial# A.A. 850 S.B. Brabender Recorder Type 3021-21.

MFR: Brabender

Carr 9004PLT Pilot Varifuge Solid Bowl Centrifuge. Used.

Used- Carr 9004PLT Pilot Varifuge Solid Bowl Centrifuge, 316L Stainless Steel, Internal pressure: 40 psi/FV @ 300F Jacket pressure: 100 psi/FV @ 300, Max RPM: 15325, Max solids: 1.5 SG, Operating temperature: 2-40C Driven by a 1 hp motor, includes controls with enclosure. National Board 314, Serial# 458

MFR: Carr

Used Carver RS6-A 3X2X6 DI Vacuum Pump – 40HP, 3545 RPM, Base Mounted

Used- Carver Model RS6-A 3X2X6 DI Vacuum Pump. Driven by a 40hp, 3/60/230/460 volt, 3545rpm motor. Base mounted. Built 2022.

MFR: Carver

Used Carver RS6-A 3X2X6 DI Vacuum Pump – 40HP, High-Speed Industrial Pump

Used- Carver Vacuum Pump, Model RS6-A 3X2X6 DI. Driven by a 40hp, 3/60/230/460 volt, 3545rpm motor. Base mounted. Built 2022

MFR: Carver

Used Cepheid GeneXpert System with GX-Hub & IVD Computer Package – Molecular Diagnostic PCR Testing Platform

Used- Cepheid GeneXpert system with GX-Hub and IVD computer package including the GX-Hub, Cepheid IVD touchscreen workstation, GeneXpert Dx / IVD operating software and licensing, and associated cables, interface hardware, and accessories. This configuration provides the primary system hardware together with the dedicated IVD computer and the required connection components as configured.

Used Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

Used- Cleaver Brooks Steam Boiler, Model CB-100-70-150ST. Rated 2,343,000 BTU/hour. 150 PSI max. working pressure. 70 HP. 3/60/230V. Serial# T3376-1-1, Built 2012.

MFR: Cleaver Brooks

Used Weldomat AG CH3-2437 Contact Welding Machine – Dual Units | 600 Contacts/Min | Tape & Wire Welding

Used- Weldomat Automatic Contact Welding Machine with (2) Welding Units; Model AG CH3-2437;Suitable for welding solid and bimetal contacts off tape reel onto stip; Up to 600 contacts per minute; 300 contacts per welding unit; Horizontal tape fee; (2) welding units in machine; Tape width 1.20-3.50mm; tape height 0.30-1.00mm; cross section 0.05-2.60 square mm; round wire 1.00-2.20mm; range of contact length 0.60-3.50mm

Used CJRTec 100 Ton CNC Conveyor Beam Press – 63" x 50" Table | Die Mount System, Waste Recovery | 2015

Used- CJRTec 100 Ton CNC Conveyor Beam Press/Die Press; Extended Table 63" x 50"; 2 Roll Pre-Feed Stand; Waste Recovery Cart; Die Mounting System. Mfg. 2015.

Used Herr-Voss Coil Line Arbor with Coil Car – 10,000 lb Capacity | 18–24" Coil ID | Control Box Included

Used- Herr-Voss Coil Line Arbor and Coil Car; 18-24" coil ID capability; 10,000 pound capacity, arbor moves back and forward to adjust for camber; Includes control box for Coil Car and Paper winder.

Used Cole-Parmer 7554-90 Peristaltic Pump – Includes #1718-21 Pump Head | Process Equipment

Used- Cole-Parmer 7554-90 Peristaltic Pump, With #1718-21 Head.

MFR: Cole Parmer

Industrial Flow Meter - Micro Motion D100S-SS, 48 GPM, 400 lb/min

Used- Micro Motion Flow Meter, Model D100S-SS. 316 Stainless Steel Product Contact Areas. Rated volume 0 to 48 gallons per minute, mass 0 to 400 pounds per minute. 1" inlet/outlet, temp range: -40 degrees C to 60 degrees C. Tube pressure 2250 max.

MFR: Micro Motion

Used Distek 2100B Dissolution System – 6 Vessel Positions, 500-1000ml

Used- Distek Dissolution System, Model 2100B.(6) built in vessel positions, 500ml to 1000ml Volume. 25-250rpm control range. 5/8" diameter nozzles, (6) 4-1/2" diameter vessel holders. Includes DS 4300 Dissolution Sampler, TCS0200B Temperature Control System. Serial# 2110487.