Power Generation Equipment

GEA Westfalia SA7-06-076 Desludger Disc Centrifuge. Used.

Used-GEA Westfalia SA7-06-076 Desludger Disc Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 8400 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, by an approximate 6.6 hp drive motor, control panel. Frame mounted. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

Used Stainless Steel Platform for Packaging Line Scale Support

Used Stainless Steel Platform, Last used for Combination Scale. This stainless steel platform last used to mount Ishida 16 head combination scale above a Laudenberg FBM 22 horizontal form fill and seal machine. Has stairs and hand rails. Platform, Stairs and hand rail only.

MFR: Ishida

Used Kunba FJ-6050L Automatic Box Taping Machine – Top & Bottom Case Sealer Conveyor

Used- Kunba Automatic Box Taping Machine Top & Bottom Tape Conveyer, Tape Width 1-7/8"- 2-3/8", Model# FJ-6050L.

Lantech Model C-1000 Automatic Case Erector – Corrugated Box Former

Used- Lantech Model C-1000 Case Erector - Industrial Packaging Machinery. Rated speed 10 cases per minute. Case size range: 7 7/8"-19 5/8"L x 5 7/8"-12 3/4"W x 5 7/8-20 1/2"H. Uses Both Air and Electric 230 AC. Used Daily for 4 years, then Every few days until put in storage in 2016.

MFR: Lantech

Used Lantech V Series SVAMD Automatic Stretch Wrapper – 30-40 Loads/Hour

Used- Lantech V Series Model SVAMD Automatic Stretch Wrapper. Capable of speeds up to 30 - 40 loads per hour. Maximum Load size: up to 4,000 Lbs. Load size range: 36" - 54" (length) x 36" - 48" (width) x 34" - 74" (height). Product transfer rate 30 feet per minute. Turntable size: 81". Film capacity: 12" diameter roll up to 20" web. Stretch Capacity: up to 150%. Control panel with Allen Bradley SLC 5/05 PLC. Includes 52" wide Entry and Exit Conveyor. Serial# A-1136. 3/60/230/460 Volt.

MFR: Lantech

Buy Pre-Owned Little David LDX-RTB 3.0 Case Taper with 3” Tape Head

Used- Little David LDX-RTB 3.0 Random Top and Bottom Case Sealer/Taper. Capable of speeds up to 185' per minute. Set up with 3" wide tape. Case size range: 6" - infinite (length) x 5-1/2" - 26" (width) x 3-1/2" - 24.5" (depth). 1/60/115.

MFR: Little David

Used Markem Imaje CimJet 300 Print & Apply Labeler – 300 DPI, 375mm/sec

Used- Markem Imaje Print and Apply Pressure Sensitive Labeler, Model CimJet 300. Print resolution 300 dpi. Approximate 152mm print width. Print speeds up to 375 mm/sec. Maximum label roll diameter 300mm, label roll core size 76mm, max ribbon length 450m, ribbon core 25mm. 8" Rollers. Mounted on frame with casters. Serial# 08C3D 6678 1/60/115V.

MFR: Markem

Used Markem Imaje CimJet 300 High-Speed Print & Apply Labeling System

Used- Markem Imaje Model CimJet 300 Print and Apply Pressure Sensitive Labeler. Print resolution 300 dpi. Approximate 152mm print width. Print speeds up to 375 mm/sec. Maximum label roll diameter 300mm, label roll core size 76mm, max ribbon length 450m, ribbon core 25mm. 8" Rollers. Mounted on frame with casters. Serial# 08C3D 6679, Built 2008. 1/60/115 Volt.

MFR: Markem

Used Moellers Automatic Stretch Hooding System – 40 Loads per Hour, Variable Frequency Drive

Used- Moellers Automatic Stretch Hooding System. 40 loads per hour capacity; 42" x 42" minimum load size; 46" x 46" maximum load size; 30" (including pallet) minimum load height; 108" (including pallet) maximum height; 1 HP variable frequency conveyor drive motor; .5 HP film drive motor; 1.5 variable frequency carriage drive motor; 2,000 Watts 48V impulse sealing gate; 1 SCFM air consumption. Includes the film drive system, precision film impulse sealing system, flying knife film cut-off, and under pallet stretch function. New in 2011.

MFR: Mollers

Industrial Liquid Ring Vacuum Pump - Nash CL Series, 3/60/230/460V

Used- Nash CL Series Liquid Ring Vacuum Pump, Model CL-703/4. Approximate 500 to 650 cfm. Driven by a 75hp, 3/60/230/460 volt, 1185 rpm motor. Approximate 4" inlet, 3" outlet. Mounted on a base plate.

Used Nash SC7 SC Liquid Ring Vacuum Pump – 60 HP, Carbon Steel, Frame-Mounted

Used- Nash SC Liquid Ring Vacuum Pump, Model SC7, Carbon Steel. Approximate 500 to 735 cfm. Driven by 60 hp, 3/60/230/460 volt, 1775 rpm motor. Max 880 rpm. Includes silencer. Mounted on frame. Test# 94E9919.

MFR: Nash

Used Nash SC7 SC Liquid Ring Vacuum Pump – 500-735 CFM, 60 HP

Used- Nash Model SC7 SC Liquid Ring Vacuum Pump, Carbon Steel. Approximate 500 to 735 cfm. Driven by 60 hp, 3/60/230/460 volt, 1775 rpm motor. Max 880 rpm. Includes silencer. Mounted on frame. Test# 94E9920.

MFR: Nash