Power Generation Equipment

Used Alfa Laval OSNX 6542 Three-Phase Tricanter Centrifuge – 4,200 RPM, 82.5 HP for Wastewater Separation

Used Alfa Laval OSNX 6542 Three-Phase Tricanter Centrifuge 4,200 RPM, 82.5 HP for Wastewater Separation. Approx. 55 kW (82.5 HP), 3/50/400-Volt main drive motor. Frame mounted on (4) legs. Control panel. New 2022. Used in a WWT application.

MFR: Alfa Laval

Used Alfa Laval AVNX 919B-31G Decanter Centrifuge System – Complete Containerized Sludge Dewatering Package

Used Alfa Laval AVNX 919B-31G Decanter Centrifuge System Complete Containerized Sludge Dewatering Package. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3250 rpm, conveyor with welded hardfacing. Approx 30 KW (40.2 HP) main drive motor, coupling, frame/casing, vibration isolators, safety guards. (2) Control panels, (1) Hydraulic unit, (1) Polymer station, (1) Discharge conveyer. Installed in a 20 container. Overall dimention:7500 mm long x 2450 mm width x 2550 mm high. Weight 7 tonnes. Previously used in a wastewater application.

MFR: Alfa Laval

Used Alfa Laval FPNX-728B-11G Solid Bowl Tricanter Centrifuge

Used-Alfa Laval FPNX-728B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 3250 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 380-420/3/50 main drive motor. 3.5 kNm gearbox. Fixed back drive system. Mounted on a stand with 4 legs. No control panel. Weight 1.5 tonnes. Previous used in a fish oil application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

PIERALISI JUMBO 4 Solid Bowl Decanter Centrifuge

Used- Reconditioned PIERALISI JUMBO 4 Solid Bowl Decanter Centrifuge. Stainless steel construction on product parts. Max bowl speed 3350 rpm. 2 phase. Single lead conveyor. Last application was sludge dewatering of soft bio sludge. This decanter unit is equipped with an automatic back drive system and comes with an electric panel, set of tools and decanter manual. Main drive: ABB motor: 45 kW, 50 Hz. Hydraulic capacity; approx. 55 m3/hour Estimated sludge capacity: 800 kg dry solids/hour. Max sludge density: 1,4 kg/dm3. Completely decanter-factory-work-shop reconditioned. Reconditioning report available on request. The steering panel also control instruments, feed pump, sludge conveyor for the dewatered sludge and flocculation mixer unit. Bowl Diam. (mm): 470 L/D ratio: 4,89 Half cone angle: 8,0 D-solids: 260 L-cyl: 1530 L-cone: 768 Max rpm / G-force: 2700 / 1915. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Alfa Laval AVNX 4055 Solid Bowl Decanter Centrifuge — 30 kW Motor, 3250 RPM

Used- Alfa Laval Solid Bowl Decanter Centrifuge, Model AVNX 4055. This Alfa Laval AVNX4055 decanter unit is in excellent working condition and includes original Alfa Laval lifting tools and a steering panel with a new touch screen. Max G-force: 3.157, max bowl speed: 3250 rpm. Gear: DD 3,5 kN, Drum diameter: 353/202 mm, Beach angle: 20, max sludge density: 1,2 kg/dm3, max feed temperature: 95C. Main drive motor: 30 kW Back drive: Electronic Brake Control automatic system. Last used for sludge dewatering. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Pieralisi FP 600-2RS Decanter Centrifuge. Used

Used- Pieralisi FP 600-2RS Decanter Centrifuge. AISI 304 Stainless Steel construction (product contact areas). Maximum bowl speed 4100 rpm, single row cake discharge ports, conveyor, casing, gearbox, Approx 15 Kw/22.5 HP 2 HP 380/3/50 ABB drive motor. On 4 legs. Reported rebuild. Previous used in a WWT application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Pieralisi

Used Pieralisi Hercules 470/3 Decanter Centrifuge – 4000 RPM, SS, WWT Application, Complete System

Used- Pieralisi Hercules 470/3 Decanter Centrifuge. Stainless Steel construction (product contact areas). Maximum bowl speed 4000 RPM, single row cake discharge ports, conveyor, casing, gearbox, 37Kw 380/3/50 drive main motor. Roto-variator motor 15 Kw, 380/50/3, On 4 legs. Control panel, pumps, sensors, valves, piping and additional infrastructure. Previously used in a WWT application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Pieralisi

Used – Alfa Laval MRNX 414B-31G Solid Bowl Decanter Centrifuge – 316 SS, Food-Grade

Used- Alfa Laval MRNX 414B-31G Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas). Maximum bowl speed 3700 RPM. Single row of lined cake discharge ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx. an 11 kW (14.7 HP), 3/50/400-Volt main drive motor. Back drive. Frame mounted on (4) legs. Sanitary design with CIP cleaning. Previously used in a food application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: Alfa Laval

Used Hiller DP 45-422 Solid Bowl Decanter Centrifuge | 2304 Duplex SS | Wastewater Dewatering

Used Hiller DP 45-422 Solid Bowl Decanter Centrifuge | 2304 Duplex SS | Wastewater Dewatering. Alloy 2304 (1.4362) on product contact parts. Maximum bowl speed 3800 rpm. Working bowl speed 3500 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approximate 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing and additional infrastructure. On 4 legs. Control panel. Previously used in a Wastewater Treatment Application. New year 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Hiller DP 45-422 Industrial Decanter Centrifuge with Duplex Stainless Bowl | Sludge Dewatering

Hiller DP 45-422 Industrial Decanter Centrifuge with Duplex Stainless Bowl | Sludge Dewatering. Alloy 2304 (1.4362) on product contact parts. Maximum bowl speed 3800 rpm. Working bowl speed 3500 rpm. Single lead conveyor with single row lined cake discharge ports with ware liners. Approximate 30 KW (45 hp) 3/50/380 Volt main drive motor, frame/casing and additional infrastructure. On 4 legs. Control panel. Previously used in a Wastewater Treatment Application. New year 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing

Used GEA Westfalia Fishmaster CF 5000 Decanter Centrifuge | Fish Oil & Protein Processing. Alloy 2304 (1.4462) stainless steel (product contact areas). Max bowl speed 4000 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox, back drive and control panel. Previously used in a Fish oil application. New year 2015. Reposted rebuild. Our freight specialists can assist you with door-to-door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: GEA Westfalia

Used Alfa Laval DSNX 4850 Decanter Centrifuge. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10°, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT applicati

Used Alfa Laval DSNX 4850 Decanter Centrifuge for Sludge Dewatering | Medical & Industrial WWT. Stainless steel (product contact areas). Max bowl speed 3650 rpm, 2 phase separation (liquid/solids) design. Bowl dia: 480/263 mm (18.7/10.2), Bowl beach angle: 10, 250 mm (10") pitch, conveyor flights are protected with around 200 tungsten carbide tiles, single row of 360 deg lined cake solids discharge ports, base, casing, gearbox 6 kNm, back drive 1:169 and Alfa Laval control panel with ABC controller. Previously used in a Medical WWT application for sludge dewatering.

MFR: Alfa Laval