Power Generation Equipment
Stock No.:
53204001Sharples Decanter Centrifuge, Model P-3000 Decanter.
Used- Sharples Decanter Centrifuge, Model P-3000 Decanter. Stainless steel. Reportedly, refurbished with VFD control panel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Sharples
Stock No.:
53228002Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge
Used- Flottweg Separation Technology Z23-4/441 Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 5500 rpm, three phase separation (liquid/liquid/solids separation), conveyor. 360-degree discharge with wear liners, base, casing, feed pipe, 11 KW-13KW, 3/50-60/400-volt motor, Back drive system, grease lubrication pump, Frame mounted. Flottweg control panel. Previously used in an alcohol fermentation plant. Serial# 002.189.14. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Flottweg
Stock No.:
53147038Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX
Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.
MFR: Krauss Maffei
Stock No.:
53159001Shenzhou Desludger Disc Centrifuge, Model DHC730
Unused- Shenzhou Desludger Disc Centrifuge, Model DHC730. Stainless steel construction (product contact areas); Maximum bowl speed 4500 rpm; separator design; 7712 separation factor; 25~35 m3/h capacity (according to different materials); 55 kW (73.75hp) drive motor; control cabinet; PLC. Currently disassembled.
Stock No.:
53036001Used Anhydro Spray Dryer, Type 111 AK Series | 66–132 lbs/hr | 304 Stainless Steel | Cyclone, Slurry Tank, Pump & Controls | Ceramic Application | Built 1995
Used- Anhydro Spray Dryer, type 111 AK Series. Capacity 66-132 lbs/hr. (30-60 kgs/hr.) end product. 304 stainless steel on product contact parts, fluid atomizer type nozzle. Incl. (1) Cyclone, (1) 115-liter (30-Gallon) slurry tank with agitator, (1) Seepex Model 006- 12 Progressive cavity pump, (1) Electric burner, (1) Control Panel. Complete with mezzanine and additional infrastructure. Previously used in a ceramic application. New 1995. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Anhydro
Stock No.:
53140006Lot of (2) Used USA Lab 100LB Jacketed Tanks – 304 Stainless Steel, 60L Capacity
Lot of (2) Used- USA Lab 100LB Jacketed Tank, 304 Stainless Steel, Vertical. Approximate capacity 60 Liter. Approximate jacket capacity 18 liter. Mounted on (4) legs with casters.
Stock No.:
52917001US Centrifuge; Model A262. Used.
Used- US Centrifuge, Model A262; Capable of running up to 40 gallons/minute; Bowl volume 4 Gallons; Maximum Bowl speed 2500 RPM; Bowl diameter 18"; Max "G" Force @ OD 1600 x one gravity; Maximum Operating temperature 160 degrees F; Maximum Particle size 1/4"; Feed Pressure 5 PSI @ 40 gpm; Stainless Steel bowl; unit housed in a 8'x10' container; 50" Long x 34.25" Wide x 50" High (without stand, approximately 90" with stand); Approximately 3,000 lbs (5,000 with container); Last used for manure separation pilot project.
MFR: US Centrifuge
Stock No.:
54309001Used Ellerwerk Basket Centrifuge – Stainless Steel, 8.8 Liter Capacity
Used- Ellerwerk Basket Centrifuge. Stainless steel construction. 2300 RPM. 8.8 liter (approx. 2.3 gallon) capacity. 50 degrees C (122 degrees F) max. operating temperature. 6 bar operating pressure. 15mm impeller diameter. Built 1986.
MFR: Ellerwerk
Stock No.:
54232001Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007
Used Pieralisi Jumbo 3 Containerized Mobile Decanter Centrifuge System | 3350 RPM | 350L Viscotherm Pump | 70 BAR | Stainless Construction | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04172.
MFR: Pieralisi
Stock No.:
54232002Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007
Used Pieralisi Jumbo 3 Mobile Decanter Centrifuge | Containerized System | 3350 RPM | 350L 70 BAR Viscotherm Pump | Built 2007 Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04171.
MFR: Pieralisi
Stock No.:
54232003Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007
Used Pieralisi Jumbo 3 Industrial Decanter Centrifuge | 3350 RPM | Containerized Stainless System with Viscotherm Pump | Built 2007. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04385.
MFR: Pieralisi
Stock No.:
54232004Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service
Used Pieralisi Jumbo 3 Oilfield Decanter Centrifuge System | Mobile Containerized Unit | 350L 70 BAR Pump | Drilling Mud Service. Product density 14 Kg/dm3. Includes Viscotherm High Pressure Pump Unit, Type E55-71/71D-EX. 350L tank, rated 70 BAR. Previously used on drilling mud. Serial# J04444, built 2007.
MFR: Pieralisi