Power Generation Equipment

Used Metal Craft TranStore 213 Gallon Tote Bin – 304 Stainless Steel

Used- Metal Craft TranStore Tote Bin, 304 Stainless steel, 213 Gallon. 9400 lb./ 4263 Kg Max. Serial# 75629-5, Built, 2017.

Used Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation

Used- Lee 400 Gallon Jacketed Vacuum Pan. Mix Kettle with Scrape Agitation. Model 400D7S. Sanitary Vessel Rated for Full Vacuum. Jacket Rated 90 PSI at 332 Degree F. Agitator is 3/2 HP, 230/460-190/380 Volt, 1760/1460 rpm into gear box with 18:1 ratio. National Board # 6444. Kettle is 13' OAH x 5'3" OD at the jacket. 3" CBO.

MFR: Lee Ind

Used Southern Heat Exchanger Shell & Tube Heat Exchanger – 4,372 Sq Ft, Carbon Steel Shell, 430 SS Tubes

Used- Southern Heat Exchanger Shell & Tube Heat Exchanger, Approximate 4,372 Square Feet, Horizontal. (514) 1-1/4" Diameter x approximate 307" long 430 stainless steel tubes rated 160 psi at 20 to 450 degrees F. Carbon steel shell rated 305 psi at 20 to 650/450 degrees F. Openings shell (2) 12", (1) 10", (1) 4", tubes (1) 22-1/2". Single head, 321 stainless steel. Saddle mounted. National Board # 12268, Serial # 03-407. Built 2005. NOTE: No Head.

MFR: Southern Heat Exchanger

Used Stainless Steel Circular Screener – Single Deck, 2 Separation (44.5" Diamet

Used Stainless Steel Circular Screener, 44.5" Internal Diameter. Single Deck, 2 Separation. Top clamp on cover with 9-1/4" diameter opening. (2) 6" Diameter outlets. Bottom driven motor. No manufacturers tag.

MFR: Unknown

Used 44.5" Stainless Steel Circular Vibratory Screener – Double Deck

Used Circular Vibratory Screener, 44.5" Inner Diameter, Stainless Steel. Single deck, 2 separation. Top clamp on cover with 9-1/4" diameter opening. (2) 6" Diameter outlets. Bottom driven motor. No manufacturers tag.

MFR: Unknown

Used 45 Cubic Foot Ribbon Blender, Stainless Steel, 78" x 30" Trough with Drive

Used Stainless Steel Ribbon Blender, Approximately 45 Cubic Foot Capacity. Trough approximately 78"L x 30" W x 34.5" D. With motor and reducer, and top grates.

Used 450 Gallon Stainless Steel Square Tank with Internal Sieve & Cover

Used Square Tank, Approximately 450 gallon. Stainless steel, with Internal Sieve. Approximately 4' x 4' x 4', Top Cover.

Stainless Steel Square Process Tank – 450 Gallon with Internal Screen

Used Approximately 450 gallon, Square Tank. Stainless steel, with Internal Sieve. Approximately 4' x 4' x 4', Top Cover.

Used GEA Niro Production Minor Spray Dryer

Used- GEA Niro Production Minor Spray Dryer, Stainless Steel. Approximate 46.8" (1200 mm) diameter x 31.2" (800 mm) straight side x 31.2" (800 mm) cone bottom. Center bottom outlet. Drying capacity approximate 22 - 33 lbs (10-15 kg) an hour. Natural gas heated by a Rillo FS5D series one stage gas burner. Bottom-up nozzle atomization by a Niro pressure nozzle in fountain mode. Includes cyclone, 2.25HP/1.5 Kw motor, control panel, piping, and additional infrastructure. On 4 legs. Previously used in a ceramic application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Niro

Used Alfa Laval AlfaVap 500-TFR Plate Exchanger – 4,604 Sq. Ft. Heat Transfer Area

Used- Alfa Laval AlfaVap Plate Exchanger, 4,604 Square Feet, Model AlfaVap 500-TFR. (163) Sets of approximate 39" wide x 80" tall 316 stainless steel plates. Designed 44 psi at -20 to 248 degrees F. product inlet and outlets, steam inlet, condensate outlets. Mounted on a carbon steel expandable frame. Serial # 30113-93635, National Board # 32122. Built 2012.

MFR: Alfa Laval

P.X. Engineering U Tube Heat Exchanger

Unused- PX Engineering U Tube Heat Exchanger, 4611 Square Feet, Horizontal. Carbon steel shell rated 150 psi at 200 degrees F. (668) 5/8'' Diameter x 252'' long 304 stainless steel tubes rated 75 psi at 212 degrees F. 304 Stainless steel tube sheet and heads. (2) 10" Shell nozzles, (2) 12" nozzles in head. Saddle mounted. Year 1980.

MFR: PX Engineering

Used GEA Niro Spray Dryer | 47" Chamber | Atomizing Nozzle | Jacketed Slurry Tanks w/ Mixers | Stainless Cyclone Collector

Used GEA Niro Spray Dryer | 47" Chamber | Atomizing Nozzle | Jacketed Slurry Tanks w/ Mixers | Stainless Cyclone Collector. 47" inside diameter, 31" straight wall, 32" cone bottom. Electric heater, atomizng Nozzle -sprays from the bottom with two stainless steel slurry tanks and mixers with inverters. Slurry tanks are jacketed with covers, baffles inside with Speedex feed pump, variable speed.Full control panel. Stainless steel cyclone collector and collection can.

MFR: Gea-Niro