Power Generation Equipment

Doyle and Roth Shell & Tube Exchanger – 20.2 Sq Ft, Side Lug Mount

Used- Doyle and Roth Shell and Tube Vertical Heat Exchanger, Approximate 20.2 Square Feet. Carbon steel shell rated 150 psi / FV at -20 to 200 degrees F. (27) .75" diameter x 48" long Hastelloy C-276 tubes rated 15 psi / FV at -20 to 300 degrees F. Openings: (1) 4", (2) 1", (3) .75". 40,025 BTU/H. Single pass. Baffle spacing 4.125". Side lug mounted. National Board# 20732, Serial# S1989-2, 2008. No bottom head.

MFR: Doyle & Roth

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton

Used Cherry-Burrell 200 Gallon Stainless Steel Jacketed Processor Tank – Scrape Surface Agitation

Used- Cherry-Burrell 200 Gallon Cone-Bottom Stainless Steel Jacketed Processor Tank with Scrape Surface Agitation. Vessel measures 48" diameter x 30" deep with bridge mount agitation, hinged lids, and 2-1/2" center bottom outlet with tri-clamp connection. Agitator is driven by 3 HP, 230/460V, 3/60 Hz, 1700 RPM motor thru right-angle gearbox with 85.65:1 ratio, resulting in 20 output RPM. Vessel includes self contained heating system for jacket with an electrically heated inline heater and small centrifugal circulation pump. Unitized on stainless steel frame with (4) legs. Serial number E-524-9. Previously used at dairy processing facility.

MFR: Cherry Burrell

Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun

Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.

MFR: Unknown

Electrically heated 200 Gallon Stainless steel Kettle

Used-Mix Kettle, 200 Gallon, Stainless steel. Electrically heated. With agitation.

Electrically heated 200 Gallon Stainless steel Kettle

Used-Mix Kettle, 200 Gallon, Stainless steel. Electrically heated. With agitation.

Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve

Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.

Ross Model HDM 200 Double Planetary 200 Gallon Mixer

Used- Ross Double Planetary Mixer, Model HDM 200. 30-200 Gallon working capacity. (2) Carbon Steel Stirrers approximate orbital speed 24 rpm, stirrer speed 26 rpm. Top dust hood with charge port, bottom fume hood, hydraulic lift with power pack. Includes (1) 44'' diameter x 33-3/4'' deep can. Driven an 40 HP, 3/60/460 VOLT, 1740 rpm XP motor, thru Delroyd model HV120 reduction gear, 74.21 to 1 ratio. Mounted on an I beam frame. Serial# 35555. Additional mix cans available for purchase at additional cost, subject to availability.

MFR: Charles Ross

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator, Vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338F. Agitator driven by a 5hp 3/60/208-230/460v 1740 rpm motor. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.

MFR: Groen

Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

MFR: Hamilton

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.

MFR: JBT Foodtech

Cataract Steel Industries Shell and Tube Heat Exchanger

Used- Cataract Steel Industries Shell and Tube Heat Exchanger, Model SG-33006-SETT, Approximate 21.2 Square Feet. Carbon steel shell rated 60 psi at -20 to 300 degrees F. (27) 3/4" diameter x 48" long 316L Stainless steel tubes rated 100 psi at -20 to 300 degrees F. Openings: (2) 6", (2) 2", (2) 3/4". Side lug mounted. National Board# 4639, Serial# 33006, built 2013. No top or bottom heads, Flange cut on one side.