Pharmaceutical Equipment

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Tray-Formers-and-Packers-Form-and-Pack/Pack-Line-PL-200_73595001_aa.jpeg

Stock No.:

73595001

Used Pack Line Tray Former – Model PL-200 (2-Lane, Stainless Steel, 2023)

Used- Pack Line Tray Former, Model PL-200. Machine is rated for speeds up to 20-80 packages per minute. 2-lane automatic operation. Capable of tray sizes from 50 X 50 mm to 300 X 300 mm and up to 1400mm in height. Stainless steel construction. Very low hours. Built 2023. 3/60/480V.

MFR: Pack Line

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Unscramblers-Rotary-Turn-Tables/Pack-West_72972007_aa.jpg

Stock No.:

72972007

Used PackWest 48" Stainless Steel Unscrambling Table – Guide Rails & Drive

Used- PackWest 48" Diameter Stainless Steel Unscrambling Table, Model #48 UNSCRAMBLER. Includes guide rails that are secured to stainless steel rods and mounted above table. Table is set at 33-1/2" high. Includes drive mounted inside stainless steel housing under table. Previously used in spice jar packaging line. Serial# RUNS-2600.

MFR: Pack West

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Bag-Sealers-Band-Hot-Air/6000-4220-000_73569016_aa.jpg

Stock No.:

73569016

Used PackRite BandRite 6000-4220-000 Continuous Band Sealer – 750 in/min, 600°F

Used PackRite BandRite 6000-4220-000 Continuous Band Sealer 750 in/min, 600F. 3/4" to 3/8" seal width. 6 mil to 12 mil single thickness bag sealing capacity. 600 Degrees F temperature control. Variable speed up to 750 Inches/minute. 10" heating section, 8" cooling section. Driven by a 1/4hp 90DC volt 68 rpm motor, 33:1 ratio.1 phase, 50/60Hz, 115 VAC Electrical requirements. Serial# 3155FM. Mounted on a Carbon Steel frame with casters. Overall dimensions 59" x 32" x 65"T.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Bag-Sealers-Band-Hot-Air/6000-2240-000_73569017_aa.jpg

Stock No.:

73569017

Used PackRite BandRite 6000-2240-000 Continuous Band Sealer – 750 in/min, 600°F, Heavy-Duty

Used PackRite BandRite 6000-2240-000 Continuous Band Sealer 750 in/min, 600F, Heavy-Duty. 3/4" to 3/8" seal width. 6 mil to 12 mil single thickness bag sealing capacity. 600 Degrees F temperature control. Variable speed up to 750 Inches/minute. 10" heating section, 8" cooling section. Driven by a 1/4hp, 1/60/115v, 1725rpm motor through a reducer 70:1 ratio. Serial# 1870RW. Mounted on a Carbon Steel frame with casters. Overall dimensions 59" x 32" x 80"T.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Unscramblers-Bulk-Bottle/Palace-D18-SPB-HS_73317002_aa.jpg

Stock No.:

73317002

Used Industrial Packaging Palace Model D18-SPB/HS-15 Bulk Bottle Unscrambler with Air Cleaner

Used- Palace Model D18-SPB/HS-15 Bulk Bottle Unscrambler with Air Cleaner. Last ran 100 containers per minute. 15 & 30 ml round and oval containers. 18" Diameter disc sorter. Proface HMI. Has Palace model H-12 elevator, 10-1/2 wide x 12" with 2" tall cleats. 1/60/115 Volt, 15 Amp.

MFR: Palace

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Labelers-Sleeve-Shrink-Sleeve/75E_70053031_aa.jpg

Stock No.:

70053031

Used PDC 75E Neck Bander Sleever with KRC184658 Heat Tunnel – 300 CPM

Used- PDC neck bander sleever, model 75E, speeds up to 300 containers/minute, .375 - 3.5" diameter, .625 - 9" high band size range, 480 volt with model KRC184658 PDC tunnel, 18 kw with 5" wide x 46" long tunnel opening on stand, 480 volt, tunnel serial# 335, bander serial#186.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Labelers-Sleeve-Shrink-Sleeve/PDC-R300Tsert_70970420_aa.jpeg

Stock No.:

70970420

Used PDC R-300Tsert Inline Sleeve Labeler w/ Dual Worm Infeed, Shrink Tunnel & Perforator – Cough Syrup 2-Pack

Used- PDC Model R-300Tsert inline sleeve labeler. Has dual worm infeed, with registration and perforating wheel. Last running two count cough syrup bottles. Includes PDC model BDE-100 Serial# 197. Includes PDC Model KRC247278 shrink tunnel.

MFR: PDC

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Labelers-Sleeve-Shrink-Sleeve/PDC-R-250_70970425_ab.jpg

Stock No.:

70970425

Used PDC R250-TS-AS Shrink Sleeve Labeler – Up to 250 CPM

Used- PDC Model R250-TS-AS Shrink Sleeve Labeler. Capable of speeds up to 250 containers per minute (depending on application). Band size range: 1.5" - 7" or 38mm - 175mm (Diam) x 2.64" - 10" or 67mm - 250mm (Height). Has a timing screw infeed, registration. The R250 Evolution can apply oriented graphics onto non-round containers such as ovals and squares, in addition to round containers. The R250 brings high speeds and durability with a reduced footprint and superior value.

MFR: PDC

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Erectors-Tape-Bottom-Seal/Pearson-CE25-T_73569004_aa.jpg

Stock No.:

73569004

Buy Used Pearson CE25-T Case Erector with Tape Sealer – Industrial Packaging Mac

Used Pearson Model CE25-T Automatic Case Erector and Bottom Taper Sealer for Right Handed cases. Capable of speeds up to 25 cases per minute. Has a case size range: Knocked down flat: 13" to 40" long x 8" to 26" height. Bottom flap: 2.5" to 8". Formed case: 8" to 24" long x 5.5" to 16" wide x 5.5" to 21" depth. Has Allen Bradley Compact Logix L31 PLC controls, A/B Panelview 300 Micro HMI. Powered case magazine. Equipped with 2" tape head. 3/60/460 Volt.

MFR: Pearson

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Case-Sealers-Tapers/Pearson-CS25-T_73569005_aa.jpg

Stock No.:

73569005

Pearson CS25-T Automatic Case Sealer – Used High-Speed Top Taper

Used Pearson Model CS25-T Automatic Top Tape Case Sealer. Capable of speeds up to 25 cases per minute (depending on application and case size). Has a case size range: 8" - 24" (length) x 5" - 16" (width) x 7" - 22-3/4" (height/depth). Maximum case weight of 30 pounds. Has automatic indexing. Allen Bradley L31 PLC, A/B Panelview 300 Micro HMI. Dual belts 3" wide. Dekka 22MR 2" Wide tape head. 3/60/460 Volt.

MFR: Pearson

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Fillers-Piston-Inline/Depositor_73529001_aa.jpg

Stock No.:

73529001

Pre-Owned Peerless Fedco Piston Depositor Model PF10-CA – Refurbished with New Components

Used- Peerless Fedco Piston Depositor, Model PF10-CA. New Piston, O-Rings, Seals, Hoses, Regulator and Foot Pedal. Hopper Dimensions 36" x 48" x 82". Serial # 210157.

https://images.aaronequipment.com/ItemImages/Packaging-Equipment/Fillers-Powder-Auger-Inline-Automatic-Filler/Per-Fil-PF23_73053003_aa.jpg

Stock No.:

73053003

Used Per-Fil PF23 Single Head Auger Filler with Conveyor – 0.5g to 10kg

Used- Per Fil Industries PF23 Single Head Auger Filler with Conveyor. Right to Left Configuration. Speeds of 10 - 40 CPM Depending on Size and Product. Fill Range of 0.5g - 10kg. 20 in Diameter x 22 in D S/S Hopper with Scrape Agitator and Auger, 1/4 HP Motor. 1 3/4 in Diameter Fill Nozzle. (2) S/S Hopper Covers with 6 in Diameter Top Inlet. 2.5 in (total width) W x 92 in L Conveyor with (2) 3/4 in W Plastic Chain Belts, Adjustable Guide Rails. Mitsubishi Digital Touch HMI and PLC. S/S Base with Plexiglas Covers, C/S Electrical Cabinet. 230 V, 3 Ph, 60 Hz, 6.35 Amp. S/N: 7747.

MFR: Per-Fil

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.