Pharmaceutical Equipment

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor – 1264 CFM, 350 HP Skid Mounted System

Ingersoll-Rand H300 Industrial Rotary Screw Air Compressor 1264 CFM, 350 HP Skid Mounted System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor – 350 HP, 1264 CFM Plant Air System

Heavy-Duty Ingersoll-Rand H300 Rotary Screw Compressor 350 HP, 1264 CFM Plant Air System. Rated operating pressure 125 psig. Maximum pressure rating 128 psig. 350 HP drive motor. 3 phase, 60 Hz. 4000V/460V. Approximately 20,200 hours. Built 2014.

MFR: Ingersoll-Rand

Used 2020 Caterpillar D3506C 350 kW Diesel Generator Set

Used 2020 Caterpillar 350 kW diesel generator set, model D3506C, powered by a CAT C13 diesel engine, serial number PW30188. Generator operates at 1800 RPM and is rated for 3-phase, 60 Hz, 480V electrical service. Unit has 779 operating hours and is equipped with a weather enclosure and sub-base fuel tank. Possible applications and suitable uses include standby or backup electrical power for industrial plants, manufacturing facilities, warehouses, commercial buildings, and other 480V 3-phase operations. Built 2020.

MFR: Caterpillar

Used Crepaco 3500-Gallon Stainless Steel Tank – Vertical for Sale

Used- Crepaco 3,500-gallon vertical tank constructed of 304 stainless steel, measuring approximately 96" diameter x 118" straight side. Tank features a dished top with dent, coned bottom, fixed stainless steel agitator bridge, (1) internal baffle, and (1) spray ball. Top openings include (2) 1-1/2" openings, (1) 2-1/2" opening, (1) 4" drive opening, and (1) 12" manway with cover. Side includes (1) 20" x 16" oval manway with cover, with a 2" center bottom outlet for product discharge. Tank is supported by (6) stainless steel legs. Serial #C6934, Built 2000. Possible applications and suitable products include beverage batching, liquid food storage, ingredient blending, chemical intermediates, wash-water/CIP storage, and non-pressure bulk liquid storage.

MFR: Crepaco

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel

Used 3,500 Gallon Vertical Mixing Tank | 304 Stainless Steel Beverage-Grade Vessel. 7'9" D x 12' OAH. Dome top, sloped bottom. Side manhole. Side discharge outlet. Side-mounted agitator. Has CIP sprayball. Inlets at top of tank. On stainless steel legs. Previously used in a beverage application.

Used Bird 36x72 Decanter Centrifuge | Heavy-Duty Continuous Solid–Liquid Separation System

Used Bird 36x72 Decanter Centrifuge | Heavy-Duty Continuous SolidLiquid Separation System. 316 Stainless steel construction. Max bowl speed 1190 RPM. 150 HP motor. 36'' x 72'' bowl dimensions.

MFR: Bird

Used Balemaster BB Series Model Q6 Auto-Tie Baler – 30"x36" Bale, 20 HP, 3000 PSI, Touchscreen PLC, 1995

Used- Balemaster BB Series Model Q6, J.2.7, U, Z.7, J, I.2, Q.W Auto-Tie Baler. Bale section measures 30" x 36". Feed chute 28" x 32". 20 HP hydraulic package with 6" diameter hydraulic cylinder. Ram rated at 85 lbs. per square inch at 3000 psi. Charging chamber is 25.3 cubic feet. PLC control with touch screen operator interface. Machine weighs 14,900 pounds with oil and no bale. Limited use. Serial# B0234-06-4298527. Manufactured in 1995.

MFR: Balemaster

Used DCR Construction Acid Reduction Column – 304 Stainless Steel, 49’ Height, 50 PSI

Used DCR Construction acid reduction column, 304 stainless steel, vertical design. Approx. 36" diameter x 297" straight side with 2:1 elliptical top and bottom heads, giving approx. 49' overall height. Internal rating 50 psi at -20 to 250 F. Top openings include 18" vapor outlet, 6" liquid inlet, 24" manway with cover and davit arm, 12" packing dump, 8" vapor inlet, and (4) 3" nozzles. Bottom openings include 24" manway with cover and davit arm and 4" liquid bottom outlet. Mounted on approx. 183" tall carbon steel skirt. Serial 4411 7798, National Board #216, built 2007.Suitable for acid reduction/scrubbing or other gas/liquid contact applications in chemical processing, where 304 stainless construction and 50 psi rating are required. Multiple manways and packing dump facilitate packing installation and maintenance. Subject to buyer engineering and regulatory validation. Capacity and rating: 36" diameter, 49' height, 50 psi rating, 2007 build.Corrosion resistance: 304 stainless, acid reduction service. Maintenance access: dual manways and packing dump.

MFR: DCR Construction

Pre-Owned Alar Auto-Vac 340 – 37.7 Sq Ft Filtering Area, 304SS Drum

Used- Alar Auto-Vac Rotary Vacuum Filter System, Model 340. 36" Diameter x 48" face 304SS drum, approximately 37.7 square feet nominal filtering area. Drum driven by an approximate .4hp, 1750 rpm gear motor, 288 to 1 ratio. Dry solids discharge with adjustable knife. Bottom holding tank with rake agitator, driven by a .33hp, 3/60/208-230/460 volt, 1140rpm motor. Receiver tank with pump, pump driven by a 1-1/2hp, 3/60/208-230/460 volt, 3450rpm motor. Control panel with Allen Bradley SLC PLC. Total connected horsepower 13. All unitized on a common carbon steel frame. Serial# 13121.

MFR: Alar Engineering

Pre-Owned 360” Long x 36” Wide Belt Conveyor for Sale

Used- Belt Conveyor. Approximate 360" long x 36" wide. Driven by motor through reducer. No Manufacturer tag.

MFR: No

Used Gryphon Biomass Hot Air Belt Dryer Model A.318 – Gas-Fired, Automated Hemp Dryer

Used- Gryphon Biomass Hot Air Belt Dryer. Model A.318 gas fired recirculating counter current air dryer; Approx. 213 lbs/hr water evaporation rate; 18 L x 3 W dryer section; Used for drying hemp w/ inlet moisture of 50-80% and outlet moisture of 7% to 11% moisture running at 3,000 lbs per 24 hours inlet and approximately 1,000 pounds per 24 hours dry mass outlet; 1.5 MMBTU nat. gas burner w/ all gas train valves, firing controls and Honeywell fire eye safeties; Supplemental electric heaters in each section; 2500 scfm blower with AB PowerFlex 753 VFD drive; Model HPSM254 AirPro high pressure radial shrouded fan, 600 RPM, 40HP, Built 2008; (6) PowerFlex 525 VFD drives; Condenser coils; Infeed sifter and lid lift assembly; 23.625" W cleated feed belt; CTS cooling tower and condenser unit; Full automation; Software plc controlled air volume, temperature and cycle time. Automated washing of chambers, air filter, and belt. Spares included: (4) condenser filters, dryer belt, bed skirts & spacers. Built 2019. Previously used for hemp.

Used ALAR AV360 Industrial Wastewater Filter System

Used Alar Engineering Corporation Auto-Vac, Model 360. Mid-sized, skid-mounted rotary vacuum drum precoat filter designed for industrial wastewater treatment and sludge dewatering applications. The system operates by drawing liquid through a filter aid media using a non-segmented drum design, enabling high-efficiency solids separation and capturing particles down to approximately 0.5 to 1 micron. The unit features a 3' diameter by 6' long stainless steel drum with a nominal filtering area of 56.5 sq. ft. and is engineered for durable, corrosion-resistant performance in demanding process environments. Total connected power is 20 HP. The system is additionally equipped with (2) 3,000-gallon holding tanks, a 2-stage pump, and a spare pump, providing operational redundancy and continuous processing capability. Approximate shipping weight is 6,200#, with a maximum system height of 8 6" and an overall skid footprint of 9'-0" wide by 16'-8" long. Well-suited for high-solids wastewater streams, the Auto-Vac is designed to deliver reliable automated filtration, sludge dewatering, and consistent effluent clarification while reducing disposal costs and labor requirements in industrial processing environments. Serial #12895. Last used to treat waste water for an automobile re-manufacturing facility.

MFR: Alar Engineering